Woxcon TPUH406TH-US Manuel utilisateur
TPUH406TH-US
4K Wallplate HDBaseT Transmitter
All Rights Reserved
Version: TPUH406TH-US_2018V1.2
User Manual
4K Wallplate HDBaseT Transmitter
Preface
Read this user manual carefully before using the product. Pictures shown in this
manual are for reference only, different models and specifications are subject to real
product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version is updated till September 15, 2017. In the constant
effort to improve our product, we reserve the right to make functions or parameters
changes without notice or obligation. Please refer to the dealers for the latest details.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
4K Wallplate HDBaseT Transmitter
SAFETY PRECAUTIONS
To i n s u r e t h e be s t f ro m t he pr od u c t , pl ea s e re ad al l instructions car e f u l l y be f o r e us i ng
the device. Save this manual for further reference.
l Unpack the equipment carefully and save the original box and packing material for
possible future shipment
l Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
l Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
l Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
l Refer all servicing to qualified service personnel.
l To prev e n t f i re o r s ho c k ha z a r d, d o n o t e xp o s e th e un i t to r ai n, m oi st ur e or i ns ta ll
this product near water.
l Do not put any heavy items on the extension cable in case of extrusion.
l Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
l Install the device in a place with fine ventilation to avoid damage caused by
overheat.
l Keep the module away from liquids.
l Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
l Do not twist or pull by force ends of the optical cable. It can cause malfunction.
l Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
l Unplug the power cord when left unused for a long period of time.
l Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
4K Wallplate HDBaseT Transmitter
Contents
1. Introduction .................................................................................................................. 1
1.1 Introduction to TPUH406TH-US ......................................................................... 1
1.2 Features ............................................................................................................. 1
1.3 Package List ....................................................................................................... 2
2. Specification ................................................................................................................ 3
3. Panel Description ........................................................................................................ 4
3.1 Front Panel ......................................................................................................... 4
3.2 Rear Panel ......................................................................................................... 5
4. System Connection ..................................................................................................... 6
5. Button Control .............................................................................................................. 8
6. RS232 Control ............................................................................................................. 8
6.1 RS232 Control Connection ................................................................................. 8
6.2 RS232 Control Software ..................................................................................... 9
6.3 RS232 Command ............................................................................................. 11
6.3.1 Control Mode Switching ......................................................................... 11
6.3.2 Signal Switching ..................................................................................... 11
6.3.3 HDCP Compliance ................................................................................. 11
6.3.4 EDID Configuration ................................................................................ 12
6.3.5 System Setting ....................................................................................... 12
7. Panel Drawing ........................................................................................................... 13
8. Troubleshooting & Maintenance ................................................................................ 14
9. Customer Service ...................................................................................................... 15
4K Wallplate HDBaseT Transmitter
1
1. Introduction
1.1 Introduction to TPUH406TH-US
The TPUH406TH-US is 2x1 wallplate HDBaseT Transmitter for switching and
extending HDMI input to display or projector, and the transmission distance is up to
40m@4K and 70m@1080p over a single Cat5e/6/7 cable based on Certified HDBaseT
technology. The resolution of HDMI input is up to 4K/UHD@ 60Hz 4:2:0.
The TPUH406TH-US is ideal for huddle rooms, classrooms and small conference
rooms. The wallmountable design provides the convenience of placing input
connections precisely where they are needed.
1.2 Features
l Features two HDMI inputs.
l Supports HDMI signal up to 4K@60Hz 4:2:0.
l Ensures display of content-protected media and interoperability with other HDCP
compliant devices.
l HDBaseT technology extend HDMI and control signals up to 70m over CATx
cable.
l Automatically detects active inputs when sources are connected.
l Flexible control options for compatibility with third-party system, matrix switcher or
receiver.
l Supports bi-directional RS232 pass-through with HDBaseT connection and local
control.
l PoH (power over HDBaseT) allows powering from the receiver at the display end.
l Provides power supply for devices like WP8 Control Panel.
4K Wallplate HDBaseT Transmitter
2
1.3 Package List
l 1 x TPUH406TH-US 4K Wallplate HDBaseT Transmitter
l 4 x Mounting Screws
l 1 x 2-pin Pluggable Terminal Block
l 1 x 4-pin Pluggable Terminal Block
l 1 x User Manual
Note
Please contact your distributor immediately if you found any damage or defect in
the components.
4K Wallplate HDBaseT Transmitter
3
2. Specification
Input & Output
Input
(2) HDMI; (1) 12V POWER
Input Connector
(2) 19-pin Type A female HDMI;
(1) 2-pin Pluggable Terminal Block
Output
(1) HDBaseT; (1) 12V POWER
Output Connector
(1) RJ45; (1) 2-pin Pluggable Terminal Block
Transmission Mode
HDBaseT
Control Part
Control Ports
(1) FIRMWARE; (1) RS232
Control Connector
(1) Micro USB; (1) 3-pin Pluggable Terminal Block
General
Video Resolution
Up to 4Kx 2K@60Hz 4:2:0
Transmission Distance
1080p ≤ 70M; 4Kx2K ≤ 40M
Bandwidth
10.2Gbps
HDMI Standard
Supports HDMI1.4 and HDCP complaint
External Power Supply
Input:100V~240V AC; Output: 12V DC 2A
Max Consumption
9.6W
Operation Temperature
0 ~ +40
Storage Temperature
-10 ~ +55
Relative Humidity
10% ~ 90%
Dimension (W*H*D)
104.5mm x 89.0mm x 44.0mm
Net Weight
About 230g
4K Wallplate HDBaseT Transmitter
4
3. Panel Description
3.1 Front Panel
No.
Name
Description
POWER
LED indicator glows red when power is applied.
LINK
LED indicator glows green when an HDBaseT link is
established.
HDCP
LED indicator glows green when an HDCP link is
established.
RESET
Press this button to reboot the transmitter.
SOURCE/AUTO
Button switches sources.
Upon push and hold changes mode between auto and
manual source select. LED indicator glows green in auto
mode.
HDMI 1 & HDMI
IN 1
l HDMI 1 - LED indicator glows when HDMI input 1 is
active, amber when a source is available, and does
not light when there is no source connected.
l HDMI IN 1 – HDMI connector with locking feature.
HDMI 2 & HDMI
IN 2
l HDMI 2 - LED indicator glows when HDMI input 2 is
active, amber when a source is available, and does
not light when there is no source connected.
l HDMI IN 2 – HDMI connector with locking feature.
FIRMWARE
Micro-USB connector is used to update firmware.
LINK
RESET
FIRMWARE
SOURCE/AUTO
HD MI IN 1
POWER
HD MI 1 HD MI 2
HD MI IN 2
123
8
5
7
4
6
4K Wallplate HDBaseT Transmitter
5
3.2 Rear Panel
No.
Name
Description
HDBT OUT
HDBaseT output, connecting with HDBaseT Receiver over a
single Category cable to deliver AV signals, also supports
PoC.
IN
12V input, connecting with power adapter.
OUT
12V output, connecting with Control Panel to energize it.
RS232
Serial port for control TPUH406T-US and the third-party
device via RS232 commands. Please refer to the 6. RS232
Control for more details.
12 V Tx R x
OUT
RS232
HD BT O UT
1
2
3
4
4K Wallplate HDBaseT Transmitter
6
4. System Connection
Usage Precaution
l Verify all components and accessories included before installation.
l System should be installed in a clean environment with proper temperature and
humidity.
l All of the power switches, plugs, sockets and power cords should be insulated and
safe.
l All devices should be connected before power on.
Overview:
LINK
RESET
FIRMWARE
SOURCE/AUTO
HDMI IN 1
POWER
HDMI 1 HDMI 2
HDMI IN 2
Laptop
Blu-Ray DVD
Cat 5e/6A
Cat 5e/6A
Tx Rx
HDMI OUTHDBT IN RS232IR IN IR OUT
PoC
HDBaeT Receiver
Wallplate HDBaeT Transmitter
Projector/Flat Screen Display
HDMI:
VGA:
HDBaseT:
Audio:
Table des matières
Autres manuels Woxcon Émetteur
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
