Woxcon TPHD462 Manuel utilisateur
Scaler WallPlate
HDBaseT Transmitter
TPHD462
All Rights Reserved
Version: TPHD462_2016V1.0
User Manual
Scaler WallPlate HDBaseT Transmitter
Preface
Read this user manual carefully before using this product. Pictures shown in this
manual is for reference only, different model and specifications are subject to real
product.
This manual is only for operation instruction only, not for any maintenance usage. Any
changes of functions and parameters since then will be informed separately. Please
refer to the dealers for the latest details.
Trademarks
Any other trademarks mentioned in this manual are acknowledged as the properties of
the trademark owner. No part of this publication may be copied or reproduced without
the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
Scaler WallPlate HDBaseT Transmitter
SAFETY PRECAUTIONS
To i nsure the b es t f r om t h e p ro d uc t , p lease read al l ins t ruct i ons c a reful ly befor e u si n g
the device. Save this manual for further reference.
l Unpack the equipment carefully and save the original box and packing material for
possible future shipment
l Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
l Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
l Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
l Refer all servicing to qualified service personnel.
l To p r ev ent f ire o r s hock h azard , do n ot expos e t h e uni t t o ra i n, mo i stur e o r ins t al l
this product near water.
l Do not put any heavy items on the extension cable in case of extrusion.
l Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
l Install the device in a place with fine ventilation to avoid damage caused by
overheat.
l Keep the module away from liquids.
l Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
l Do not twist or pull by force ends of the optical cable. It can cause malfunction.
l Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
l Unplug the power cord when left unused for a long period of time.
l Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
Scaler WallPlate HDBaseT Transmitter
Contents
1. Introduction .................................................................................................................. 1
1.1 Product Overview ............................................................................................... 1
1.2 Package Contents .............................................................................................. 2
2. Panel Description ........................................................................................................ 3
3. Installation Instructions ................................................................................................ 4
3.1 Basic Installation ................................................................................................ 4
3.2 Device Power ..................................................................................................... 6
3.3 12V DC Output Power ........................................................................................ 6
3.4 RS232 Connections ........................................................................................... 6
4. General Operation ....................................................................................................... 8
4.1 Automatic Switching ........................................................................................... 8
4.2 RS232 Switching ................................................................................................ 8
4.3 LED indicators .................................................................................................... 8
4.4 Reset Button ....................................................................................................... 9
4.5 Firmware Port ..................................................................................................... 9
4.6 EDID Management ............................................................................................. 9
4.7 HDCP Management ........................................................................................... 9
4.8 Low Power Mode .............................................................................................. 10
4.9 Display Control Functionality ............................................................................ 10
5. RS232 Control ........................................................................................................... 12
5.1.1 Installation/uninstallation of RS232 Control Software ............................ 12
5.1.2 Basic Settings ........................................................................................ 12
5.1.3 Switching Commands ............................................................................ 13
5.1.4 Power Management ............................................................................... 15
5.1.5 HDCP Compliance ................................................................................. 15
5.1.6 DisplayPort Audio ................................................................................... 15
5.1.7 Device Baud Rate .................................................................................. 16
5.1.8 Device Information ................................................................................. 16
5.1.9 Factory Reset ......................................................................................... 16
Scaler WallPlate HDBaseT Transmitter
5.1.10 EDID Configuration .............................................................................. 16
5.1.11 Display Control Settings ....................................................................... 17
5.1.12 Display Control Queries ....................................................................... 19
5.1.13 Display Control Hex Commands .......................................................... 19
6. Troubleshooting ......................................................................................................... 21
7. Techn i cal S p ecif i cati o ns ............................................................................................. 22
8. After-sales Service ..................................................................................................... 24
Scaler WallPlate HDBaseT Transmitter
1
1. Introduction
1.1 Product Overview
The product is a two-gang, Decora-style wallplate designed to be the primary PC
interface for classrooms, boardrooms, and conference centers. It features DisplayPort
+ Audio to HDMI conversion and an HDMI input. If the DisplayPort signal does not
support embedded audio, the analog audio input port can be accessed via RS232.
The HDBaseT Transmitter utilizes HDBaseT technology to extend the digital output up
to 70 meters away using solid core shielded Category 5e or greater cable. This
transmitter device is compatible with several HDBaseT receivers, but is designed to
work primarily with the HDBaseT Receiver. The unit features multiple EDID modes to
eliminate user confusion, and incompatible video formats.
The HDBaseT Transmitter can be powered from the rear panel or by Power over
HDBaseT (PoH), including midspan injectors that support Power over Ethernet (PoE)
Alternative A or Alternative B. Built-in surge protection and diagnostic LEDs ensure
hassle-free and robust installations. The HDBaseT Transmitter also features a
customizable power management system, which will put the unit into a low power state
after no video for 30 minutes or being inactive for 3 hours by default. When using the
local power input, 12V DC is available for other devices on the power output
connections on the rear of the device.
The HDBaseT Transmitter will detect which input has an active video input, and switch
to that input – if both inputs are active, the “last in” will be selected. RS232 control of
the HDBaseT Transmitter can be accomplished by connecting to the RS232 port on a
compatible receiver, such as a HDBaseT Receiver, or through a direct connection on
the RS232 input of the device.
The HDBaseT Transmitter can be programmed to control the connected display. This
allows display power and input to be automatically controlled based on video activity,
eliminating the need for a third party control system in many installations.
Scaler WallPlate HDBaseT Transmitter
2
1.2 Package Contents
l HDBaseT Transmitter
l 12V DC Power Supply
l 2-pin Removable Screw Terminal
l 4-pin Removable Screw Terminal
l RS232 cable (3-pin to DE9)
l User Manual
NotePlease confirm if the product and the accessories are all included, if not, please
contact with the dealers.
Scaler WallPlate HDBaseT Transmitter
3
2. Panel Description
1. HDMI input and input status LED.
2. Status LEDs and Reset button.
3. DisplayPort with analog audio input and
input status LED
4. Micro USB port for firmware updating.
A. HDBaseT output with PoH input
support.
B. 12V DC power input port
C. 12V DC power output port
D. RS232 port
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
HDMI
AUDIO
LINK HDCP
RESET
FIRMWARE
DP
Po H I N
HD B T OU T
OUT
12V
IN
12V
TX
RX
1
2
A
B
C
D
4
3
Front PanelRPanelear
Scaler WallPlate HDBaseT Transmitter
4
3. Installation Instructions
3.1 Basic Installation
1. Turn off power and disconnection the audio/video equipment by following the
manufacturer’s instructions.
2. Connect shielded Category 5E or greater twisted pair cable with the TIA/EIA-568B
crimp pattern between the transmitter (HDBaseT Transmitter) and the HDBaseT
receiver.
3. If the HDBaseT receiver cannot provide power to the HDBaseT Transmitter,
connect the included power supply to the 12V DC power input of the device.
4. Connect an HDMI cable between the display and the HDBaseT receiver per the
manufacturer’s instructions.
5. Power on attached audio/video devices.
6. Apply power to the HDBaseT receiver.
7. If the HDBaseT receiver cannot provide power to the HDBaseT Transmitter,
connect the power supply going to the HDBaseT Transmitter to an AC outlet.
8. Connect HDMI or DisplayPort/Audio sources. The analog audio input is only
paired with the DisplayPort input. To switch between analog and embedded audio
on the DisplayPort input, please see 5.1.6 DisplayPort Audio.
HDBaseT Cabling Requirements
For all HDBaseT Cabling, the EIA/TIA-568B crimp pattern must be used on
Category 6 or greater cable. In areas with large amounts of electromagnetic (EM) or
radio frequency (RF) interference, a shielded variety of Category 5e or greater cable
is recommended with shielded connectors on both ends of the selected cable.
Scaler WallPlate HDBaseT Transmitter
5
Table des matières
Autres manuels Woxcon Émetteur
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
