WIKA PGS23 Manuel utilisateur

Model PGS23 Model PGS43 Model DPGS43 Model 532.54

Operating instructions

Betriebsanleitung

Pressure gauges with inductive contact model 831,

for hazardous areas

Manometer mit Induktivkontakt Typ 831,

für explosionsgefährdete Bereiche

Examples for pressure gauges with inductive contact model 831

2Pressure gauges with inductive contact model 831, for hazardous areas

14320154.01 06/2019 EN/DE

Operating instructions for pressure gauges with

contact model 831 for hazardous areas

Page 3 - 32

Betriebsanleitung für Kontaktmanometer mit

Kontakttyp 831 für explosionsgefährdete Bereiche

Seite 33 - 61

WIKA®is a registered trademark in various countries.

WIKA®ist eine geschützte Marke in verschiedenen Ländern.

Prior to starting any work, read the operating instructions!

Keep for later use!

Vor Beginn aller Arbeiten Betriebsanleitung lesen!

Zum späteren Gebrauch aufbewahren!

3Pressure gauges with inductive contact model 831, for hazardous areas

14320154.01 06/2019 EN/DE

Contents

Declarations of conformity can be found online at www.wika.com.

1. General information 4

2. Design and function 5

2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . 5

2.2 Description. . . . . . . . . . . . . . . . . . . . . . . 5

2.3 Scope of delivery . . . . . . . . . . . . . . . . . . . . 5

3. Safety 6

3.1 Explanation of symbols . . . . . . . . . . . . . . . . . . 6

3.2 Intended use . . . . . . . . . . . . . . . . . . . . . . 6

3.3 Improper use . . . . . . . . . . . . . . . . . . . . . . 7

3.4 Responsibility of the operator . . . . . . . . . . . . . . . . 7

3.5 Personnel qualification. . . . . . . . . . . . . . . . . . . 8

3.6 Skilled personnel . . . . . . . . . . . . . . . . . . . . 8

3.7 Labelling, safety marks . . . . . . . . . . . . . . . . . . 8

3.8 Ex marking. . . . . . . . . . . . . . . . . . . . . . . 9

3.9 Specifications and temperature limits. . . . . . . . . . . . . . 9

3.10 Special conditions for safe use (X conditions) . . . . . . . . . . .11

4. Transport, packaging and storage 11

4.1 Transport . . . . . . . . . . . . . . . . . . . . . . .11

4.2 Packaging and storage . . . . . . . . . . . . . . . . . .12

5. Commissioning, operation 12

5.1 Mechanical connection . . . . . . . . . . . . . . . . . .13

5.2 Electrical connection . . . . . . . . . . . . . . . . . . .16

5.3 Adjusting the set pointers . . . . . . . . . . . . . . . . . .18

5.4 Commissioning . . . . . . . . . . . . . . . . . . . . .18

6. Faults 18

7. Maintenance and cleaning 20

7.1 Maintenance . . . . . . . . . . . . . . . . . . . . . .20

7.2 Cleaning . . . . . . . . . . . . . . . . . . . . . . .20

8. Dismounting, return and disposal 21

8.1 Dismounting . . . . . . . . . . . . . . . . . . . . . .21

8.2 Return . . . . . . . . . . . . . . . . . . . . . . . .21

8.3 Disposal . . . . . . . . . . . . . . . . . . . . . . .22

9. Specications 23

9.1 Standard cable socket (only NS 100 and 160) . . . . . . . . . . .23

9.2 Cable outlet (only NS 50 and 63) . . . . . . . . . . . . . . .23

9.3 Inductive contact model 831 . . . . . . . . . . . . . . . . .23

9.4 Associated isolating amplifiers . . . . . . . . . . . . . . . .24

9.5 Contact pressure gauges . . . . . . . . . . . . . . . . . .25

Annex: EU declaration of conformity 62

Pressure gauges with inductive contact model 831, for hazardous areas4

14320154.01 06/2019 EN/DE

1. General information

The contact pressure gauge described in the operating instructions has been designed

and manufactured using state-of-the-art technology. All components are subject to strin-

gent quality and environmental criteria during production. Our management systems are

certied to ISO 9001 and ISO 14001.

These operating instructions contain important information on handling the instrument.

Working safely requires that all safety instructions and work instructions are observed.

Observe the relevant local accident prevention regulations and general safety regulations

for the instrument's range of use.

The operating instructions are part of the product and must be kept in the immediate

vicinity of the instrument and readily accessible to skilled personnel at any time.

Skilled personnel must have carefully read and understood the operating instructions

prior to beginning any work.

The manufacturer's liability is void in the case of any damage caused by using the

product contrary to its intended use, non-compliance with these operating instructions,

assignment of insuciently qualied skilled personnel or unauthorised modications to

the instrument.

The general terms and conditions contained in the sales documentation shall apply.

Subject to technical modications.

Further information:

- Internet address: www.wika.de / www.wika.com

- Relevant data sheet: PM 01.03 (model 111.11.050)

PM 01.05 (model 131.11.050)

PV 22.01 (model PGS21.1x0)

PV 22.02 (models PGS23.1x0, PGS26.1x0)

PV 22.03 (models PGS23.063, PGS26.063)

PV 24.03 (model PGS43.1x0)

PV 27.05 (model DPGS43.1x0)

PV 27.13 (model DPGS43HP.1x0)

PM 02.11 (model 232.35.063)

PV 24.07 (model 432.56)

PV 25.02 (model 532.54)

PV 26.06 (model 632.51)

PM 07.08 (model 736.51)

2. Design and function

2.1 Overview

Example, model PGS23.100, version “S1” per EN 837

Laminated safety glass

Pressure element

Plug of the blow-out device

Pressure compensating valve

Electrical connection with cable box

Set pointer

Adjustment lock

Process connection

2.2 Description

These pressure gauges with inductive

contact(s) have been designed speci-

cally for applications in hazardous areas.

WIKA manufactures and qualies these instruments following EN 837 (gauge pressure),

DIN 16002 (absolute pressure), DIN 16003 (dierential pressure) and DIN 16085 (switch

contacts) in the versions “S1” and “S3”.

Version “S1” per EN 837

This version is designed with a blow-out device at the case.

Safety version “S3” per EN 837

This version is made up of laminated safety glass, a solid bae wall between measuring

system and dial and a blow-out back. In the event of a failure, the operator is protected at the

front side, as media or components can only be ejected via the back of the case.

Switch contact model 831

The built-in electrical inductive contacts are non-contact slot-type inductive proximity

sensors, which are powered from switching ampliers with certied intrinsically safe circuits.

On exceeding the adjustable limit values, their output circuits are either opened or closed.

2.3 Scope of delivery

Cross-check scope of delivery with delivery note.



   







5Pressure gauges with inductive contact model 831, for hazardous areas

14320154.01 06/2019 EN/DE

2. Design and function

Pressure gauges with inductive contact model 831, for hazardous areas6

14320154.01 06/2019 EN/DE

3. Safety

3.1 Explanation of symbols

WARNING!

... indicates a potentially dangerous situation that can result in serious injury or

death, if not avoided.

CAUTION!

... indicates a potentially dangerous situation that can result in light injuries or

damage to property or the environment, if not avoided.

DANGER!

... identies hazards caused by electrical power. Should the safety instructions

not be observed, there is a risk of serious or fatal injury.

WARNING!

... indicates a potentially dangerous situation in the hazardous area that results

in serious injury or death, if not avoided.

WARNING!

... indicates a potentially dangerous situation that can result in burns, caused by

hot surfaces or liquids, if not avoided.

Information

... points out useful tips, recommendations and information for ecient and

trouble-free operation.

3.2 Intended use

These instruments are used to control process values and to monitor plants in industrial

applications.The contact pressure gauge, with up to 3 integrated model 831 inductive

contacts, displays the process pressure on site and opens/closes circuits at dened

pressure values.

The instrument oers many application possibilities for gaseous and liquid aggressive media

that are not highly viscous or crystallising.

Only use the instrument in applications that lie within its technical performance limits (e.g.

temperature limits, material compatibility, ...).

→ For performance limits see chapter 9 “Specications”.

The instrument has been designed and built solely for the intended use described here, and

may only be used accordingly.

The manufacturer shall not be liable for claims of any type based on operation contrary to

the intended use.

7Pressure gauges with inductive contact model 831, for hazardous areas

14320154.01 06/2019 EN/DE

3. Safety

3.3 Improper use

WARNING!

Injuries through improper use

Improper use of the instrument can lead to hazardous situations and injuries.

▶

Refrain from unauthorised modications to the instrument.

▶

Do not use the instrument with abrasive or viscous media.

Exceptions are diaphragm pressure gauges (models PGS43 and 432.56)

with specially coated diaphragms (abrasive) or versions with open connect-

ing anges (viscous).

Any use beyond or dierent to the intended use is considered as improper use.

3.4 Responsibility of the operator

The instrument is used in the industrial sector. The operator is therefore responsible for legal

obligations regarding safety at work.

The safety instructions within these operating instructions, as well as the safety, accident

prevention and environmental protection regulations for the application area must be

maintained.

The operator is obliged to maintain the product label in a legible condition.

To ensure safe working on the instrument, the operating company must ensure

that suitable rst-aid equipment is available and aid is provided whenever required.

that the operating personnel are regularly instructed in all topics regarding work safety,

rst aid and environmental protection and know the operating instructions and in particu-

lar, the safety instructions contained therein.

that the instrument is suitable for the particular application in accordance with its intended

use.

that personal protective equipment is available.

On the wetted parts of the instrument, small residual amounts of the adjustment

medium (e.g. compressed air, water, oil) can adhere from production. With

increased requirements for technical cleanliness, suitability for the application

must be checked by the operator before commissioning.

Pressure gauges with inductive contact model 831, for hazardous areas8

14320154.01 06/2019 EN/DE

3.5 Personnel qualification

WARNING!

Riskofinjuryshouldqualicationbeinsucient!

Improper handling can result in considerable injury and damage to equipment.

The activities described in these operating instructions may only be carried out

by skilled personnel who have the qualications described below.

3.6 Skilled personnel

Skilled personnel are understood to be personnel who, based on their technical training,

knowledge of measurement and control technology and on their experience and knowledge

of country-specic regulations, current standards and directives, are capable of carrying out

the work described and independently recognising potential hazards.

3.7 Labelling, safety marks

Product label (example)

Model + contact version Ex marking

Article number Case lling

Serial number Pin assignment

Date of manufacture (month/year) Switch contact model and switching function

Before mounting and commissioning the instrument, ensure you read the

operating instructions!

Risk of burns!

Potentially dangerous situation caused by hot surfaces.

The instrument bearing this mark is a safety pressure gauge with a solid bae

wall in accordance with EN 837, safety version “S3”.

















3. Safety

9Pressure gauges with inductive contact model 831, for hazardous areas

14320154.01 06/2019 EN/DE

Do not dispose of with household waste. Ensure a proper disposal in accord-

ance with national regulations.

3.8 Ex marking

DANGER!

Danger to life due to loss of explosion protection

Non-observance of these instructions and their contents may result in the loss of

explosion protection.

▶

Observe the safety instructions in this chapter and further explosion protec-

tion instructions in these operating instructions.

▶

Observe the information given in the applicable type examination certi-

cate and the relevant country-specic regulations for installation and use in

hazardous areas (e.g. IEC 60079-14, NEC, CEC).

Check whether the classication is suitable for the application. Observe the relevant national

regulations.

Instruments without PTFE lining

ATEX

IECEx

II 2G Ex ia IIC T6/T5/T4 Gb

II 2D Ex ia IIIB T95°C/T135°C Db

Instruments with PTFE lining

Option with models: PGS43.1x0, 432.56

ATEX

IECEx

II 2G Ex ia IIB T6/T5/T4 Gb

3.9 Specifications and temperature limits

Ingress protection per IEC/EN 60529

For information on the ingress protection of the respective instrument, see chapter

9 “Specications”. For the IECEx assessment, IP20 ingress protection was assumed.

Permissible temperature range

For determining the maximum temperature at the instrument, besides the medium

temperature also other inuences such as the ambient temperature and, if applicable, the

solar irradiation must be taken into account.

3. Safety

T-Ref

Pressure gauges with inductive contact model 831, for hazardous areas10

14320154.01 06/2019 EN/DE

Gas hazardous area

Required temperature class

(ignition temperature)

Permissible temperature range at the

instrument

T6 -20 ... +60 °C

T5 ... T1 -20 ... +70 °C

Dust hazardous area

Maximum surface temperature Permissible temperature range at the

instrument

T135°C -20 ... +60 °C, (+70 °C optional)

T95°C (only with NS 63) -20 ... +60 °C, (+70 °C optional)

The installation should be made in such a way that the temperature range of the instrument,

also considering the eects of convection and thermal radiation, neither exceeds nor falls

below the permissible limits.

The permissible temperature ranges of the contact models must not be exceeded at the

instrument either. If necessary, measures for cooling (e.g. syphon, instrumentation valve,

diaphragm seal etc.) have to be taken.

Compliance with the permissible temperature range during operation must be ensured by

the operator by means of temperature measurement(s) at “T-Ref” within the shown hatched

area(s).

3. Safety

Pressure gauge Dierential pressure gauge

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels WIKA Instrument de mesure

WIKA

WIKA 712.15.100 Manuel utilisateur

WIKA

WIKA DG-10-E Manuel utilisateur

WIKA

WIKA CPH6200 Manuel utilisateur

WIKA

WIKA RVM/U-L-1 Manuel utilisateur

WIKA

WIKA 821 Manuel utilisateur

WIKA

WIKA 73 02.100 Series Manuel utilisateur

WIKA

WIKA cpd8000-g Manuel utilisateur

WIKA

WIKA 212.20.100 Manuel utilisateur

WIKA

WIKA CTD9100-1100 Manuel utilisateur

WIKA

WIKA Delta-comb Manuel utilisateur

WIKA

WIKA CPG2300 Series Manuel utilisateur

WIKA

WIKA 232.50.100 Manuel utilisateur

WIKA

WIKA TR10-B Manuel utilisateur

WIKA

WIKA 7 Series Manuel utilisateur

WIKA

WIKA CPG1500 Manuel utilisateur

WIKA

WIKA CPG1000 Manuel utilisateur

WIKA

WIKA DIH50 Manuel utilisateur

WIKA

WIKA 891.34 Manuel utilisateur

WIKA

WIKA 4 Manuel utilisateur

WIKA

WIKA PGT01 Manuel utilisateur

WIKA

WIKA A-AI-1 Manuel utilisateur

WIKA

WIKA GA11 Manuel utilisateur

WIKA

WIKA PG23CP Manuel utilisateur

WIKA

WIKA DIH10 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur