Weider 220 W Bench Manuel utilisateur

USER'S MANUAL

Visit our website at

www.weiderfitness.com

new products, prizes,

fitness tips, and much more!

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

Model No. WEBE9978.0

Serial No.

Write the serial number in the

space above for future reference.

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete cus-

tomer satisfaction. If you have

questions, or if parts are missing,

PLEASE DO NOT CONTACT

THE STORE; please contact

Customer Care.

IMPORTANT: You must note the

product model number and

serial number (see the drawing

above) before contacting us:

CALL TOLL-FREE:

1-877-992-5999

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–4 p.m. MT

ON THE WEB:

www.weiderservice.com

Serial Number

Decal

WARNINGDECALPLACE ENT ..............................................................2

I PORTANTPRECAUTIONS ................................................................3

BEFOREYOUBEGIN ......................................................................4

PARTIDENTIFICATIONCHART ..............................................................5

ASSE BLY ...............................................................................6

ADJUST ENT ...........................................................................10

EXERCISEGUIDELINES ...................................................................12

PARTLIST ..............................................................................14

EXPLODEDDRAWING ....................................................................15

ORDERINGREPLACE ENTPARTS ..................................................BackCover

LI ITEDWARRANTY ..............................................................BackCover

TABLE OF CONTENTS

WARNING DECAL PLACEMENT

WEIDER is a registered trademark of ICON IP, Inc.

This drawing shows the location(s) of the warning

decal(s). If a decal is missing or illegible, call

the telephone number on the front cover of

this manual and request a free replacement

decal. Apply the decal in the location shown.

Note: The decal(s) may not be shown at actual

size.

WARNING: To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your weight bench before using your weight bench.

ICON assumes no responsibility for personal injury or property damage sustained by or through the

use of this product.

1. Before beginning any exercise program,

consult your physician. This is especially

important for persons over the age of 35 or

persons with pre-existing health problems.

2. Use the weight bench only as described in

this manual.

3. It is the responsibility of the owner to ensure

that all users of the weight bench are ade-

quately informed of all precautions.

4. The weight bench is intended for home use

only. Do not use the weight bench in any

commercial, rental, or institutional setting.

5. Keep the weight bench indoors, away from

moisture and dust. Place the weight bench

on a level surface, with a mat beneath it to

protect the floor or carpet. Make sure that

there is enough clearance around the weight

bench to mount, dismount, and use the

weight bench.

6. Inspect and properly tighten all parts regular-

ly. Replace any worn parts immediately.

7. Keep children under age 12 and pets away

from the weight bench at all times.

8. Keep hands and feet away from moving

parts.

9. Always wear athletic shoes for foot protec-

tion while exercising.

10. The weight bench is designed to support a

maximum user weight of 300 lbs. (136 kg),

and a maximum total weight of 410 lbs. (186

kg). Do not place more than 110 lbs. (50 kg),

including a barbell and weights, on the

weight rests. Do not place more than 50 lbs.

(23 kg) on the leg lever.

11. Do not use a barbell that is longer than five

ft. (1.5 m) with the weight bench.

12. Always make sure there is an equal amount

of weight on each side of your barbell when

you are using it. When adding or removing

weights, always keep some weight on both

ends of the barbell to prevent the barbell

from tipping.

13. When using the leg lever, place a barbell with

the same amount of weight on the weight

rests to balance the bench.

14. When using the backrest in an inclined or

level position, make sure that the backrest

support is inserted completely through the

uprights and is turned to the locked position.

15. If you feel pain or dizziness at any time while

exercising, stop immediately and begin cool-

ing down.

16. Always exercise with a partner. Your partner

should stand behind you to catch the barbell

if you cannot complete a repetition.

IMPORTANT PRECAUTIONS

Backrest

Weight Rest

Backrest Support

Upright

Leg Lever

Weight Tube

Barbell

Seat

BEFORE YOU BEGIN

ASSE BLED DI ENSIONS:

Height: 3 ft. 8 in. (112 cm)

Width: 2 ft. 4 in. (66 cm)

Depth: 6 ft. (183 cm)

Weight: 200 lbs. (91 kg)

Thank you for selecting the WEIDER®220 W weight

bench. The versatile 220 W weight bench is designed

to develop every major muscle group of the body.

Whether your goal is a shapely figure, dramatic mus-

cle size and strength, or a healthier cardiovascular

system, the weight bench will help you to achieve the

specific results you want.

For your benefit, read this manual carefully before

you use the weight bench. If you have questions

after reading this manual, please see the front cover of

this manual. To help us assist you, note the product

model number and serial number before contacting us.

The model number and the location of the serial num-

ber decal are shown on the front cover of this manual.

To avoid a registration fee for any service needed

under warranty, you must register the weight

bench at www.weiderservice.com/registration.

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

M8 Locknut (17)

M6 x 16mm Screw (29)

M10 Locknut (33)

M10 x 63mm Bolt (32)

M6 x 38mm Screw (30)

M8 Washer (16)

M10 Washer (34)

M6 Washer (26)

M10 x 137mm Bolt (36)

M8 x 55mm Bolt (18)

M8 x 43mm Bolt (27)

M8 x 42mm Carriage Bolt (15)

PART IDENTIFICATION CHART

This chart is provided to help you identify the small parts used in assembly. The number in parentheses below

each part refers to the key number of the part from the PART LIST near the end of this manual. Note: Some

small parts may have been preattached. If a part is not in the hardware kit, check to see if it has been

preattached.

ASSEMBLY

Indents

Warning

Decals 18

Orient the Crossbar (3) so that the warning decals

are on top. Attach the Crossbar to an Upright (1)

with two 8 x 55mm Bolts (18), two 8 Washers

(16), and two 8 Locknuts (17); do not tighten

the Locknuts yet.

Attach the Crossbar (3) to the other Upright

(1) in the same way.

2. Orient the Stabilizer (13) so that the indented

holes are facing the floor. Attach the Front Leg (8)

to the Stabilizer with two 8 x 42mm Carriage

Bolts (15) and two 8 Locknuts (17); do not

tighten the Locknuts yet.

Before assembling the weight bench,

make sure that you have read and under-

stand the information in the box above.

Before beginning assembly, carefully read the fol-

lowing information and instructions:

• To hire an authorized service technician to

assemble the weight bench, call 1-800-445-2480.

• Assembly requires two persons.

• Because of its size, the weight bench should be

assembled in the location where it will be used.

ake sure that there is enough clearance to walk

around the weight bench as you assemble it.

• As you assemble the weight bench, make sure all

parts are oriented as shown in the drawings.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until assembly is completed.

• Tighten all parts as you assemble them, unless

instructed to do otherwise.

• For help identifying small parts, use the PART

IDENTIFICATION CHART on page 5.

• The included grease and the following tools (not

included) may be required for assembly:

Two adjustable wrenches

One hammer

One standard screwdriver

One Phillips screwdriver

Assembly may be more convenient if you have a

socket set, a set of open-end or closed-end

wrenches, or a set of ratchet wrenches.

Make Assembly Easier

Everything in this manual is designed to ensure

that the weight bench can be assembled suc-

cessfully by almost anyone. Set aside plenty of

time so that assembly will go smoothly.

3. Attach the Front Leg (8) to the Frame (2) with two

8 x 43mm Bolts (27), four 8 Washers (16),

and two 8 Locknuts (17); do not tighten the

Locknuts yet.

4. Attach the Frame (2) to the Crossbar (3) with three

8 x 55mm Bolts (18), two 8 Washers (16), and

three 8 Locknuts (17); do not tighten the

Locknuts yet.

5. Apply some of the included grease to an 10 x

63mm Bolt (32). Attach the Leg Lever (4) to the

Front Leg (8) with the Bolt and an 10 Locknut

(33). Do not overtighten the Locknut; the Leg

Lever must pivot easily.

27 16

Grease

7. Attach the Backrest Tubes (5) to the Backrest (6)

with four 6 x 38mm Screws (30) and four 6

Washers (26); do not tighten the Screws yet.

8. Insert the Backrest Support (7) into a set of holes

in the Uprights (1). Rotate the Backrest Support

to the locked position, with the locking pin

wrapped around the left Upright.

Grease an 10 x 137mm Bolt (36). Attach the

Backrest Tubes (5) to the welded tube on the

Frame (2) with the Bolt, two 10 Washers (34),

and an 10 Locknut (33). Do not overtighten

the Locknut; the Backrest Tubes must pivot

easily.

See steps 1–4. Tighten the 8 Locknuts (17).

See step 7. Tighten the 6 x 38mm Screws (30).

530

Grease

Welded

Tube

Locking

6. Insert a Long Pad Tube (10) into a hole in the

Leg Lever (4). Slide two Foam Pads (23) onto the

Long Pad Tube.

Attach the other Long Pad Tube (10) and

Foam Pads (23) in the same way.

11. Make sure that all parts are properly tightened before the weight bench is used. Note: Some hardware

may be left over after assembly is completed. The use of all remaining parts will be explained in ADJUST ENT,

starting on page 10.

10. Insert the Inner Bar (12) into the Outer Bar (25)

and align the indicated holes. Using a hammer,

tap the two Roll Pins (19) into the holes until they

are flush with the Outer Bar.

Holes

9. Attach the Seat (11) to the Frame (2) with four 6

x 16mm Screws (29). 9

ATTACHING WEIGHTS TO THE LEG LEVER

To use the Leg Lever (4), slide the desired weights

onto the weight tube on the Leg Lever. Do not place

more than 50 lbs. (23 kg) on the Leg Lever.

AD USTING THE BACKREST

The Backrest (6) can be used in a declined position,

a level position, or any of three inclined positions. To

use the Backrest in a declined position, remove the

Backrest Support (7) and lay the Backrest on the

Crossbar (3).

To use the Backrest (6) in a level position or an

inclined position, insert the Backrest Support (7) into

a set of holes in the Uprights (1). Rotate the Backrest

Support to the locked position, with the locking pin

wrapped around the left Upright. Rest the Backrest on

the Backrest Support.

Weight

Tube Weight

Locking

WARNING:

When using the

Leg Lever (4), place a barbell with the same

amount of weight on the weight rests to

balance the bench.

AD USTMENT

The steps below explain how the weight bench can be adjusted. See the accompanying exercise guide to see

the correct form for several exercises.

ake sure all parts are properly tightened each time the weight bench is used. Replace any worn parts immediately.

Clean the weight bench with a damp cloth and a mild, non-abrasive detergent; do not use solvents to clean the

weight bench.

Autres manuels pour 220 W Bench

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Weider Salle de sport à domicile

Weider

Weider WEBE05590 Manuel utilisateur

Weider

Weider WESY2966.0 Manuel utilisateur

Weider

Weider 831.159833 Manuel utilisateur

Weider

Weider WESY5993.3 Manuel utilisateur

Weider

Weider PRO 800 831.150741 Manuel utilisateur

Weider

Weider Pro 3000 Guide de démarrage rapide

Weider

Weider 140 WEIGHT BENCH COMBO Manuel utilisateur

Weider

Weider 831.153972 Manuel utilisateur

Weider

Weider Pro 330 Bench Manuel utilisateur

Weider

Weider 215 Bench Manuel utilisateur

Weider

Weider Body Works Manuel utilisateur

Weider

Weider Pro 545 Manuel utilisateur

Weider

Weider Flex 944 Manuel utilisateur

Weider

Weider WESY19510 Manuel utilisateur

Weider

Weider 215 Bench Manuel du système

Weider

Weider 8980 I Guide de l'utilisateur

Weider

Weider WEMC10161 Manuel utilisateur

Weider

Weider Flex 8960 Guide de démarrage rapide

Weider

Weider Pro 3000 Manuel d'utilisation et d'entretien

Weider

Weider Tc 150 Bench Manuel d'utilisation et d'entretien

Weider

Weider WESY38320 Manuel utilisateur

Weider

Weider 8225hard Drive Sys Manuel utilisateur

Weider

Weider PRO 220 Manuel utilisateur

Weider

Weider Crossbow By 2000x Manuel utilisateur

Manuels Salle de sport à domicile populaires d'autres marques

Horizon Fitness

Horizon Fitness OXFORD 6 Manuel utilisateur

Energetics

Energetics Multi Trainer 5.1 Manuel utilisateur

Matrix

Matrix MG-PL Series Manuel utilisateur

Reebok

Reebok Tbr2i Manuel d'utilisation et d'entretien

Pure Fitness

Pure Fitness 8526HE Manuel utilisateur

Bowflex

Bowflex Sport 001-6961 Manuel utilisateur

NordicTrack

NordicTrack E8200 Competition Bench Guide de démarrage rapide

Body Solid

Body Solid GHYP-345 Manuel utilisateur

Evo

Evo TAHOE 5105 Manuel utilisateur

cardiobull

cardiobull RA17 Manuel utilisateur

ParaBody

ParaBody 40 Manuel utilisateur

JLL

JLL Ventus Pro Air Power Manuel utilisateur

Trojan

Trojan Colorado 370 Manuel utilisateur

Octane Fitness

Octane Fitness xRide xR650 Manuel utilisateur

Precor

Precor Discovery Series Manuel utilisateur

Insportline

Insportline RW600 Manuel utilisateur

Stamina

Stamina 55-1532 Manuel utilisateur

Tunturi

Tunturi R25 Manuel utilisateur