ViewSonic VS13784 Manuel utilisateur

ViewSonic®

Model No. : VS13784

DPF8-CAM

Digital Photo Frame

- User Guide

- Guide de l’utilisateur

- Bedienungsanleitung

- Guía del usuario

- Guida dell’utente

- Guia do usuário

- Kullanιcι kιlavuzu

- Gebruikshandleiding

- Pyководство пользователя

- 使用手冊 (繁體)

- 使用手册 (简体)

- 사용자 안내서

- ユーザーガイド

IMPORTANT: Please read this User Guide to obtain important

information on installing and using your product in a safe

manner, as well as registering your product for future service.

Warranty information contained in this User Guide will describe

your limited coverage from ViewSonic Corporation, which is

also found on our web site at http://www.viewsonic.com in

English, or in specic languages using the Regional selection

box in the upper right corner of our website.

“Antes de operar su equipo lea cuidadosamente las

instrucciones en este manual”

ViewSonic i DPF8-CAM

Compliance Information

FCC Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy, and if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modications not expressly approved by the party

responsible for compliance could void your authority to operate the equipment.

For Canada

• This Class B digital apparatus complies with Canadian ICES-003.

• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CE Conformity for European Countries

The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive

2006/95/EC.

Following information is only for EU-member states:

The mark is in compliance with the Waste Electrical and Electronic Equipment Directive

2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment including any spent

or discarded batteries or accumulators as unsorted municipal waste, but use the return

and collection systems available.

If the batteries, accumulators and button cells included with this equipment, display the

chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content

of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004%

Lead.

ViewSonic ii DPF8-CAM

Important Safety Instructions

1. Read these instructions completely before using the equipment.

2. Keep these instructions in a safe place.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this equipment near water. Warning: To reduce the risk of re or electric shock, do

not expose this apparatus to rain or moisture.

6. Clean with a soft, dry cloth.

7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices

(including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade and the third prong are provided for your safety. If the

provided plug does not t into your outlet, consult an electrician for replacement of the obsolete

outlet.

10. P

rotect the power cord from being walked on or pinched particularly at plugs. Convenience

receptacles and the point where they exit from the unit. Be sure that the power outlet is located

near the unit so that it is easily accessible.

11. Only use attachments/accessories specied by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer,

or sold with the unit. When a cart is used, use caution when moving the cart/unit

combination to avoid injury from tipping over.

13. Unplug this unit when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the unit has been

damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled

onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not

operate normally or has been dropped.

15. Caution: There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of

used batteries according to the instructions.

16. Only use battery packs approved by the manufacturer or else damage may occur.

ViewSonic iii DPF8-CAM

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC of the

European Parliament and the Council on restriction of the use of certain hazardous substances in

electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum

concentration values issued by the European Technical Adaptation Committee (TAC) as shown

below:

Substance Proposed Maximum

Concentration Actual Concentration

Lead (Pb) 0.1% < 0.1%

Mercury (Hg) 0.1% < 0.1%

Cadmium (Cd) 0.01% < 0.01%

Hexavalent Chromium (Cr6+)0.1% < 0.1%

Polybrominated biphenyls

(PBB) 0.1% < 0.1%

Polybrominated diphenyl ethers

(PBDE) 0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex of the RoHS

Directives as noted below:

Examples of exempted components are:

1. Mercury in compact uorescent lamps not exceeding 5 mg per lamp and in other lamps not

specically mentioned in the Annex of RoHS Directive.

2. Lead in glass of cathode ray tubes, electronic components, uorescent tubes, and electronic

ceramic parts (e.g. piezoelectronic devices).

3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more

lead).

4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium

containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.

ViewSonic iv DPF8-CAM

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of

ViewSonic Corporation.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions

contained herein; nor for incidental or consequential damages resulting from furnishing this

material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to

change product specications without notice. Information in this document may change without

notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose

without prior written permission from ViewSonic Corporation.

Product Registration

To meet your future needs, and to receive any additional product information as it becomes

available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic®

Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may

mail or fax to ViewSonic.

For Your Records

Product Name:

Model Number:

Document Number:

Serial Number:

Purchase Date:

DPF8-CAM

ViewSonic Digital Photo Frame

VS13784

DPF8-CAM_UG_ENG Rev. 1B 02-18-11

_______________________________

Product disposal at end of product life

ViewSonic respects the environment and is committed to working and living green. Thank you for

being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.

USA & Canada: http://www.viewsonic.com/company/green/recycle-program/

Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/

Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx

ViewSonic 1 DPF8-CAM

Table of Contents

Getting Started................................................................ 2

Package Content .................................................................................. 2

Product Features .................................................................................. 2

Photo frame Overview .......................................................................... 3

How to set up the stand........................................................................ 4

Connecting to AC power ....................................................................... 5

Powering on/off your photo frame......................................................... 5

Using the internal/ external memory devices........................................ 5

Operations and Functions............................................. 6

Best Capture Environment.................................................................... 6

Setting language................................................................................... 6

Recapturing old photos......................................................................... 7

Playing back your les.......................................................................... 9

Setting Date /Time / Alarm.................................................................... 11

Main Menu............................................................................................ 12

Advanced Setting.................................................................................. 13

Appendix ......................................................................... 14

Troubleshooting .................................................................................... 14

Using Remote Control .......................................................................... 14

Specications........................................................................................ 15

ViewSonic 2 DPF8-CAM

Package Content

Product Features

Photo frame Frame Stand AC adapter USB cable

Remote Control CD Quick Start Guide

- 20.32 cm (8’’) Digital photo frame with 5 Mega-pixel camera

- 8’’ TFT LCD display (800x600 pixels)

- Fixed focus

- Removable and extendable stand for digitalizing old pictures

- Auto slideshow with multiple transition effects

- Supports high resolution pictures (JPEG) up to 16 Mega-pixel

- Supports SD, SDHC, MMC, MS Pro card (up to 32GB) and USB ash drive

- Sleep mode as auto-off function for saving power

- USB 2.0 high speed

- Calendar, clock, and alarm

The package contains the following items:

Getting Started

ViewSonic 3DPF8-CAM

Photo frame Overview

Menu Navigation

Prop *

USB drive connector

SD/SDHC/MMC/

MS Pro card slot

EXIT button

(Up button

Down button

Left button

Right button)

MENU button

Power indicator

Crop control

Power switch

COPY button

DELETE button

DC power jack/USB

connector for PC

Lens

LCD Panel

Camera button

(use this button to

take a photo)

Infrared

receiver for

Remote Control

Slideshow / OK

button

(use this button

to play/pause

slideshow)

Speaker and

Ventilatory holes

* Follow the diagram on the

left to extract the prop to

support the photo frame.

ViewSonic 4DPF8-CAM

Stand

Photo Frame

How to set up the stand

1) Align the mark on the stand with the mark on the back of the photo frame.

Then gently place the ring of the stand on top of the lens to attach the stand.

2) Gently rotate the stand clockwise as indicated until the mark is aligned with the

mark.

3) Unfold the stand on the table by following the steps in the illustrations:

4) Place the photo frame on a at surface such as a table.

ViewSonic 5 DPF8-CAM

To power on the photo frame, turn the power switch to the ON position. When power

is turned on, the power indicator will light up. To power off the photo frame, turn the

power switch to the OFF position.

Connect one end of the accessory power

cable to the photo frame, and then

connect the power adapter to a power

socket.

Note: Always use the accessory power cable

only.

You can use the internal memory, or the compatible external memory devices

( SD/SDHC/MMC/MS Pro/USB drive) to store the photos you took.

Note: If you connect the external memory devices to the photo frame rst and then power

on it, the data in the USB drive will be read rst. However, if the photo frame is already

powered on, the memory device that inserted lastly will be read rst.

Connecting to AC power

Powering on/off your photo frame

Using the internal/ external memory devices

Power indicator

Power switch

SD/SDHC/MMC/

MS Pro card slot

USB drive connector

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ViewSonic Cadre photo numérique

ViewSonic

ViewSonic VFD1024w-51 Manuel utilisateur

ViewSonic

ViewSonic VFA720w-50 Manuel utilisateur

ViewSonic

ViewSonic DPG807BK-51P Manuel utilisateur

ViewSonic

ViewSonic DP701W4WH Manuel utilisateur

ViewSonic

ViewSonic VFM1024W Manuel utilisateur

ViewSonic

ViewSonic VFA720w-10 Manuel utilisateur

ViewSonic

ViewSonic DPG807 Manuel utilisateur

ViewSonic

ViewSonic NO FOUND VFD725W-50P Manuel utilisateur

ViewSonic

ViewSonic VFM620w-70 Manuel utilisateur

ViewSonic

ViewSonic VFM1530-11 Manuel utilisateur

ViewSonic

ViewSonic VS12289-1W Manuel utilisateur

ViewSonic

ViewSonic DPG801BK Manuel utilisateur

ViewSonic

ViewSonic DF87G Manuel utilisateur

ViewSonic

ViewSonic DPX704WH Manuel utilisateur

ViewSonic

ViewSonic VFM823-50 Manuel utilisateur

ViewSonic

ViewSonic VFD724w-11 Manuel utilisateur

ViewSonic

ViewSonic VS13471 Manuel utilisateur

ViewSonic

ViewSonic VFD720-12 - Digital Photo Frame Manuel utilisateur

ViewSonic

ViewSonic VFP1038-11 Manuel utilisateur

ViewSonic

ViewSonic VS13442 Manuel utilisateur

ViewSonic

ViewSonic DPG801BK Manuel utilisateur

ViewSonic

ViewSonic DPD308BK Manuel utilisateur

ViewSonic

ViewSonic VFM1586-11E Manuel utilisateur

ViewSonic

ViewSonic VS12242 Manuel utilisateur

Manuels Cadre photo numérique populaires d'autres marques

LENCO

LENCO DF-830 Manuel utilisateur

NIX

NIX Advance X10G Manuel utilisateur

Nextar

Nextar N7S-100 Manuel utilisateur

Sungale

Sungale TD350A Manuel utilisateur

texet

texet DPF-830 Instructions de montage

Philips

Philips SPF2017 Manuel utilisateur

Philips

Philips SPF1327 Manuel utilisateur

Philips

Philips SPF7010/10 Manuel utilisateur

Digital Spectrum

Digital Spectrum MemoryVue MV-1500 Manuel utilisateur

YURAKU

YURAKU YUR.PHOTO 7B4C Manuel utilisateur

Denver

Denver PFF-710WHITE MK2 Manuel utilisateur

Pandigital

Pandigital PAN8000DWPCF1 Manuel utilisateur

Rekam

Rekam Deja View HD-850 Manuel utilisateur

Majestic

Majestic DF 918HD MP3 Manuel utilisateur

Philips

Philips SPF2527 Manuel utilisateur

Digital Foci

Digital Foci Image Moments IMT-063 Manuel utilisateur

Nokia

Nokia SU-4 Manuel utilisateur

Hama

Hama 118564 Manuel utilisateur