ViewSonic VS12978 Manuel utilisateur

ViewSonicTM

VFD810

Digital Photo Frame

Model No.: VS12978

- User Guide

- Guide de l’utilisateur

- Guía del usuario

IMPORTANT: Please read this User Guide to obtain important

information on installing and using your product in a safe

manner, as well as registering your product for future service.

Warranty information contained in this User Guide will describe

your limited coverage from ViewSonic Corporation, which is also

found on our web site at http://www.viewsonic.com in English,

or in specic languages using the Regional selection box in the

upper right corner of our website.

“Antes de operar su equipo lea cuidadosamente las instrucciones

en este manual”

ViewSonic i VFD810

Compliance Information

FCC Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modications not expressly approved by the party responsible for compliance could void your

authority to operate the equipment.

For Canada

• This Class B digital apparatus complies with Canadian ICES-003.

• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Following information is only for EU-member states:

The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted

municipal waste, but use the return and collection systems available.

If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that

the battery has a heavy metal content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.

ENGLISH

ViewSonic ii VFD810

Important Safety Instructions

1. Do not use the equipment near water.

2. Wipe the machine with a soft and dry cloth.

3. Do not block any vent holes. Please install the product in accordance with the manufacturer’s instructions.

4. Do not use the product on your legs for a long time because it gets hot and you may be burned.

5. Please avoid installing the product in a place where the temperature is above 35°C or lower than 5°C, or in a place that is moist or wet.

6. Protect the power cord plug, outlet, and connections to other equipment from damage by trapping and squeezing.

7. Please only use devices and accessories specied by the manufacturer.

8. The unit is hot pluggable. However it is recommended that the power be turned off before the memory card is inserted or removed.

9. Do not remove the memory card during data access. The data may be lost and the product could be damaged.

10. Disconnect the power cord if the product will not be used for an extended period.

11. Do not repair, disassemble, or modify the product. Only qualied ViewSonic personnel can check and repair any damage to the machine.

12. The unauthorized playing of certain audio or image les may infringe the related copyright laws under certain circumstances.

13. When you use the internal speakers, do not adjust the volume to a high level, or the sounds may distort and become unpleasant.

14. When you view pictures for an extended period of time your eyes may become strained.

15. Do not touch the screen because it is difcult to remove nger marks.

16. Avoid exposing the digital photo frame to direct sunlight. Adjust the angle to reduce glare.

17. Careful attention should always be paid when moving the digital photo frame.

18. Make sure the place where the digital photo frame is placed is clean and dry.

19. If there is smoke, a strange smell or an abnormal noise, immediately turn off the digital photo frame and contact your dealer or ViewSonic.

20. Do not rub or apply pressure to the LCD panel. This may cause irreparable damage to the screen.

ViewSonic iii VFD810

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the

Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed

to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Substance Proposed Maximum Concentration Actual Concentration

Lead (Pb) 0.1% < 0.1%

Mercury (Hg) 0.1% < 0.1%

Cadmium (Cd) 0.01% < 0.01%

Hexavalent Chromium (Cr6+) 0.1% < 0.1%

Polybrominated biphenyls (PBB) 0.1% < 0.1%

Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below:

Examples of exempted components are:

1. Mercury in compact uorescent lamps not exceeding 5 mg per lamp and in other lamps not specically mentioned in the Annex of

RoHS Directive.

2. Lead in glass of cathode ray tubes, electronic components, uorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices).

3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).

4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a

cooper alloy containing up to 4% lead by weight.

ENGLISH

ViewSonic iv VFD810

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.

Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental

or consequential damages resulting from furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specications without

notice. Information in this document may change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission

from ViewSonic Corporation.

For Your Records

Product Name:

Model Number:

Document Number:

Serial Number:

Purchase Date:

VFD810

ViewSonic Digital Photo Frame

VS12978

VFD810-50M_UG_ENG Rev. 1B 04-14-10

__________________________________

Product disposal at end of product life

ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its useful life.

Your local waste disposal company may provide information about proper disposal.

TABLE OF CONTENTS

Introduction.............................................................................................................................................................................................1

Main Features .........................................................................................................................................................................................2

Controls and Connections ....................................................................................................................................................................3

Getting Started........................................................................................................................................................................................4

Attaching the mount .............................................................................................................................................................................4

Connecting to the power ......................................................................................................................................................................4

Inserting Media.....................................................................................................................................................................................5

Viewing Photos.......................................................................................................................................................................................6

Main menu............................................................................................................................................................................................6

Viewing thumbnails ..............................................................................................................................................................................6

Playing a slideshow..............................................................................................................................................................................7

Using the tool bar .................................................................................................................................................................................7

Changing Frame Settings......................................................................................................................................................................8

Setting items.........................................................................................................................................................................................8

Frequently Asked Questions.................................................................................................................................................................9

Specification .........................................................................................................................................................................................10

ViewSonic vVFD810

Introduction

Thank you for purchasing this Digital Photo Frame.

This Digital Photo Frame is compatible with SD, MMC, and MS memory card formats, which enables you to view digital photo directly from your

camera’s memory card.

This manual contains important safety information and operation instructions, so please read all the instructions carefully before using the Digital

Photo Frame and keeps it for future reference.

We have done our best to produce a complete and accurate manual; however, we cannot ensure there are no errors

or omissions. We also have no responsibility for damages or loss of data caused by improper operation.

The instruction manual is subject to change for improvement without notice.

Trademarks and trade names used in this user’s manual are owned by their respective companies or organizations.

ViewSonic VFD810

Main Features

y8 inch Digital TFT LCD: 800*600 4:3

yDecorative appearance, good quality

yDisplays digital photos (JPEG) without a computer

ySlide show with multiple transition effects

yCompatible with SD/MMC/MS memory cards

yUSB Host for connecting to the USB mass storage

ViewSonic VFD810

Controls and Connections

1. SD/MMC/MS -card slot

2. USB HOST

3. 5V 1A DC Input socket

4. [j] Down button; Rotate a photo counterclockwise

5. [i] Up button; Rotate a photo clockwise

6. [g] Right/Next button

7. [h] Left/Previous button

8. [2] Exit button

9. [M] Menu button; Show tool bar

10. [X] Play/Pause/Confirm button

11. On/Off switch

12. Adjustable mounting

ViewSonic VFD810

Getting Started

Attaching the mount

1. Place the frame on a flat surface with its back facing you.

2. Place the mount carefully in the slot on the back of the frame.

3. Turn the mount counter-clockwise by 45° until it locks. It will now be possible to set the device in the landscape orientation.

4. Turn the mount counter-clockwise by 90° until it locks. It will now be possible to set the device in the portrait orientation.

5. After the mount has been attached, you can adjust the height of the mount by pushing the mount gradually to the required alignment.

Connecting to the power

1. Plug one end of the power adaptor into the DC socket in the

Digital Photo Frame, and the other into a wall outlet.

2. Switch the power to the ON marking position to turn on the

Digital Photo Frame.

Note:

yIf it is the first time for you to switch on the unit or switch on the unit after default settings, you have to select a display language by

pressing [i]or [j]and then press [X], use [i]or [j]to select “Yes” and then press [X]to confirm.

yTo turn off the Digital Photo Frame completely, slide the power switch from ON to OFF.

ViewSonic VFD810

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ViewSonic Cadre photo numérique

ViewSonic

ViewSonic DPA709WD Manuel utilisateur

ViewSonic

ViewSonic VFM842-12 Manuel utilisateur

ViewSonic

ViewSonic VFM1042-52 Manuel utilisateur

ViewSonic

ViewSonic VFM836-54 Manuel utilisateur

ViewSonic

ViewSonic DF87G Manuel utilisateur

ViewSonic

ViewSonic VFA770W-10 Manuel utilisateur

ViewSonic

ViewSonic VFM1536-11 Manuel utilisateur

ViewSonic

ViewSonic VFA713W-10 Manuel utilisateur

ViewSonic

ViewSonic VFD823 Manuel utilisateur

ViewSonic

ViewSonic VFD1024w-51 Manuel utilisateur

ViewSonic

ViewSonic DPX702 Manuel utilisateur

ViewSonic

ViewSonic VS13442 Manuel utilisateur

ViewSonic

ViewSonic DPG807 Manuel utilisateur

ViewSonic

ViewSonic VS13471 Manuel utilisateur

ViewSonic

ViewSonic VFM1530-11 Manuel utilisateur

ViewSonic

ViewSonic VFA724w-10 Manuel utilisateur

ViewSonic

ViewSonic DP701W4WH Manuel utilisateur

ViewSonic

ViewSonic VFD820-70 Manuel utilisateur

ViewSonic

ViewSonic VFA720w-10 Manuel utilisateur

ViewSonic

ViewSonic VFM820-50 Manuel utilisateur

ViewSonic

ViewSonic DPX1002 Manuel utilisateur

ViewSonic

ViewSonic DF88W-523 Manuel utilisateur

ViewSonic

ViewSonic VFD1078W-11E Manuel utilisateur

ViewSonic

ViewSonic VFM1035-52 Manuel utilisateur

Manuels Cadre photo numérique populaires d'autres marques

LENCO

LENCO DF-830 Manuel utilisateur

NIX

NIX Advance X10G Manuel utilisateur

Nextar

Nextar N7S-100 Manuel utilisateur

Sungale

Sungale TD350A Manuel utilisateur

texet

texet DPF-830 Instructions de montage

Philips

Philips SPF2017 Manuel utilisateur

Philips

Philips SPF1327 Manuel utilisateur

Philips

Philips SPF7010/10 Manuel utilisateur

Digital Spectrum

Digital Spectrum MemoryVue MV-1500 Manuel utilisateur

YURAKU

YURAKU YUR.PHOTO 7B4C Manuel utilisateur

Denver

Denver PFF-710WHITE MK2 Manuel utilisateur

Pandigital

Pandigital PAN8000DWPCF1 Manuel utilisateur

Rekam

Rekam Deja View HD-850 Manuel utilisateur

Majestic

Majestic DF 918HD MP3 Manuel utilisateur

Philips

Philips SPF2527 Manuel utilisateur

Digital Foci

Digital Foci Image Moments IMT-063 Manuel utilisateur

Nokia

Nokia SU-4 Manuel utilisateur

Hama

Hama 118564 Manuel utilisateur