Viessmann VITOTRONIC 100 Manuel utilisateur

Operating instructions

for the system user

VIESMANN

Multi boiler system with control unit for constant temperature

operation (Vitotronic 100, type GC1B, GC4B or HC1B) and weather-

compensated cascade control unit (Vitotronic 300-K, type MW1B or

MW2B)

VITOTRONIC 100

VITOTRONIC 300-K

5592 675 GB 3/2011 Please keep safe.

Please follow these safety instructions closely to prevent accidents and mate-

rial losses.

Safety instructions explained

Danger

This symbol warns against the

risk of injury.

!Please note

This symbol warns against the

risk of material losses and envi-

ronmental pollution.

Note

Details identified by the word "Note" con-

tain additional information.

Target group

These operating instructions are for the

heating system user.

This unit is not designed to be used by

persons (including children) with limited

bodily, sensory or mental capacities, or

lacking experience and/or lacking knowl-

edge, unless they are supervised by a

person responsible for their safety, or

have received instructions from such a

person as to how to use the unit.

!Please note

Children should be supervised.

Ensure that children do not play

with the unit.

Danger

Incorrectly executed work on the

heating system can lead to life-

threatening accidents.

■ Work on gas appliances must

only be carried out by a regis-

tered gas fitter.

■ Work on electrical equipment

must only be carried out by a

qualified electrician.

If you smell gas

Danger

Escaping gas can lead to explo-

sions which may result in serious

injury.

■ Do not smoke. Prevent naked

flames and sparks. Never

switch lights or electrical appli-

ances ON or OFF.

■ Close the gas shut-off valve.

■ Open windows and doors.

■ Remove all people from the

danger zone.

■ Notify your gas or electricity

supplier and your heating con-

tractor from outside the build-

ing.

■ Shut off the electricity supply to

the building from a safe place

(outside the building).

Safety instructions

For your safety

5592 675 GB

If you smell flue gas

Danger

Flue gas can lead to life-threat-

ening poisoning.

■ Shut down the heating system.

■ Ventilate the boiler room.

■ Close all doors in the living

space.

In case of fire

Danger

Fire creates the risk of burning

and explosions.

■ Shut down the heating system.

■ Close the shut-off valves of the

fuel lines.

■ Use a tested fire extinguisher,

class ABC.

Boiler room requirements

!Please note

Incorrect ambient conditions can

lead to damage to the heating

system and put the safe opera-

tion at risk.

■ Ensure ambient temperatures

above 0 ºC and below 35 ºC.

■ Prevent air contamination by

halogenated hydrocarbons

(e.g. as contained in paints,

solvents or cleaning fluids) and

excessive dust (e.g. through

grinding/polishing work).

■ Avoid continuously high humid-

ity levels (e.g. through frequent

drying of washing).

■ Never close existing ventilation

apertures.

Ancillary components, spare and

wearing parts

!Please note

Components that are not tested

with the heating system may lead

to damage to the heating system,

or may affect their various func-

tions.

Installation or replacement work

must only be carried out by quali-

fied personnel.

Safety instructions

For your safety (cont.)

5592 675 GB

Introductory information

Commissioning..................................................................................................... 7

Your system is preset at the factory..................................................................... 7

Terminology.......................................................................................................... 8

About the controls

Where to find the controls.................................................................................... 9

Controls, Vitotronic 100........................................................................................ 9

■Opening the control unit.................................................................................... 9

■Programming unit.............................................................................................. 10

How to use the controls, Vitotronic 100................................................................ 11

■ Symbols............................................................................................................ 11

Controls, Vitotronic 300-K.................................................................................... 12

■ Opening the control unit.................................................................................... 12

■ Programming unit.............................................................................................. 12

Menu, Vitotronic 300-K......................................................................................... 13

■ Standard menu................................................................................................. 13

■ Extended menu................................................................................................. 14

How to use the controls, Vitotronic 300-K............................................................ 15

Start-up/shutdown

Starting the heating system.................................................................................. 17

■ Controls with cover flap open............................................................................ 17

Stopping the heating system................................................................................ 19

■ With frost protection monitoring........................................................................ 19

■ Without frost protection monitoring (shutdown)................................................ 20

Central heating

Required settings (central heating)...................................................................... 21

Selecting a heating circuit.................................................................................... 21

Setting the room temperature............................................................................... 22

Setting the heating program for central heating................................................... 22

Setting the time program for central heating........................................................ 23

Changing the heating curve................................................................................. 24

Stopping the central heating................................................................................. 25

Comfort and energy saving functions

Selecting comfort function "Party mode".............................................................. 26

Selecting energy saving function "Economy mode"............................................. 27

Selecting energy saving function "Holiday program"............................................ 27

DHW heating

Required settings (DHW heating)......................................................................... 29

Index

5592 675 GB

Setting the DHW temperature.............................................................................. 29

Setting the heating program for DHW heating..................................................... 29

Setting the time program for DHW heating.......................................................... 30

■ Heating system with DHW circulation pump..................................................... 31

Stopping DHW heating......................................................................................... 32

Further adjustments

Selecting the boiler sequence.............................................................................. 33

Setting the display contrast.................................................................................. 33

Setting the display brightness.............................................................................. 33

Entering names for the heating circuits................................................................ 34

Setting the time and date..................................................................................... 35

Language selection.............................................................................................. 35

Setting the temperature unit (°C/°F)..................................................................... 35

■ Vitotronic 100.................................................................................................... 35

■ Vitotronic 300-K................................................................................................ 35

Restoring factory settings..................................................................................... 36

■ Vitotronic 100.................................................................................................... 36

■ Vitotronic 300-K................................................................................................ 36

Scanning options

Scanning information............................................................................................ 37

■ Vitotronic 100 — scans for every boiler............................................................ 37

■ Vitotronic 300-K — scans for the heating system............................................. 38

Scanning service messages................................................................................. 39

■ Vitotronic 100.................................................................................................... 39

■ Vitotronic 300-K................................................................................................ 39

Scanning fault messages..................................................................................... 40

■ Vitotronic 100.................................................................................................... 40

■ Vitotronic 300-K................................................................................................ 40

Emissions test mode......................................................................................... 42

What to do if...

Rooms are too cold.............................................................................................. 43

Rooms are too hot................................................................................................ 44

There is no hot water............................................................................................ 45

The DHW is too hot.............................................................................................. 46

"OFF" is displayed at the Vitotronic 100............................................................... 46

"ë" is displayed at the Vitotronic 100.................................................................. 46

"ã" is displayed at the Vitotronic 100.................................................................. 46

"ã" flashes and "Fault" is displayed at the Vitotronic 300-K................................ 46

"Controls locked out" is displayed at the Vitotronic 300-K.................................... 47

Index

5592 675 GB

"External hook-up" is displayed at the Vitotronic 300-K....................................... 47

"Central control" is displayed at the Vitotronic 300-K........................................... 47

"External program" is displayed at the Vitotronic 300-K....................................... 47

Repair work

Maintenance......................................................................................................... 48

■ Cleaning............................................................................................................ 48

■ Inspection and maintenance............................................................................. 48

Appendix

Menu overview Vitotronic 300-K........................................................................... 50

■ Extended menu................................................................................................. 50

■ Scanning options in the extended menu........................................................... 51

Terminology.......................................................................................................... 52

Keyword index.................................................................................................... 57

Index

Index (cont.)

5592 675 GB

The commissioning and matching of the

control unit to local conditions and build-

ing characteristics, as well as instructing

the user in the operation of the system,

must be carried out by your heating con-

tractor.

As the user of new combustion equip-

ment, you may be obliged to notify your

local flue gas inspector of the installation

[check local regulations]. Your local flue

gas inspector will also inform you [where

appropriate] about work he may be

required to perform on your combustion

equipment (e.g. regular checks, clean-

ing).

Your system is preset at the factory

The control units are factory-set for cen-

tral heating and DHW heating:

■ Vitotronic 100:

" "

■ Vitotronic 300-K:

"Heating and DHW"

Your heating system is therefore ready

for use.

Central heating

■ Between 6:00 and 22:00 h, the rooms

are heated to 20 °C "Set room tem-

perature" (standard heating mode).

■ Between 22:00 and 6:00 h, the rooms

are heated to 3 °C "Set reduced room

temp" (reduced heating mode, frost

protection).

■ Your heating contractor can make fur-

ther settings for you during commis-

sioning.

You can change any settings individu-

ally at any time to suit your require-

ments (see chapter "Central heating").

DHW heating

■ Between 5:30 and 22:00 h, the DHW

is heated to 50 °C "Set DHW temper-

ature". Any installed DHW circulation

pump is on.

■ Between 22:00 and 05:30 h, the DHW

cylinder temperature will not be rehea-

ted. Any installed DHW circulation

pump is off.

■ Your heating contractor can make fur-

ther settings for you during commis-

sioning.

You can change any settings individu-

ally at any time to suit your require-

ments (see chapter "DHW heating").

Frost protection

■ Your boiler, heating circuits and DHW

cylinder are protected against frost.

Wintertime/summertime changeover

■ This changeover is automatic.

Time and date

■ The day and time were set by your

heating contractor during commission-

ing.

Introductory information

Commissioning

5592 675 GB

Power failure

■ All data is saved if there is a power

failure.

Terminology

To provide you with a better understand-

ing of the functions of your control unit,

the appendix contains the chapter "Ter-

minology" (see page 52).

Introductory information

Your system is preset at the factory (cont.)

5592 675 GB

Each boiler is equipped with its own con-

trol unit for constant temperature opera-

tion. These control units are regulated by

a higher weather-compensated cascade

control unit.

■ Control unit for constant temperature

operation on the boiler:

Vitotronic 100

■ Higher weather-compensated cas-

cade control unit:

Vitotronic 300-K

You can change all settings for your

heating system centrally at the control

unit programming unit.

You may also make such changes at the

remote control units, if your system is

equipped with such units.

Remote control operating instruc-

tions

The settings at the Vitotronic 100 are

described in these operating instruc-

tions. You do not need the operating

instructions provided with these control

units.

Controls, Vitotronic 100

Opening the control unit

Vitotronic 100, types GC1B and GC4B

ACover flap

The programming unit is located behind

the cover flap.

To open, pull the flap from the top edge

forward.

About the controls

Where to find the controls

5592 675 GB

Vitotronic 100, type HC1B

123

bar

3 4 8°C

Programming unit

3 4 8°C

Takes you to the previous step in

the menu or cancels a setting that

has been started.

Cursor keys

To scroll in the menu or to set val-

ues.

OK Confirms your selection or saves

the setting.

No function.

Enables you to call up the menu for

settings and scanning.

About the controls

Controls, Vitotronic 100 (cont.)

5592 675 GB

Autres manuels pour VITOTRONIC 100

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Viessmann Unité de contrôle

Viessmann

Viessmann VITOTRONIC 100 Guide rapide

Viessmann

Viessmann 5066 Manuel utilisateur

Viessmann

Viessmann VITOTRONIC 100 Guide rapide

Viessmann

Viessmann VITOSOLIC 200 Manuel d'instructions

Viessmann

Viessmann BCU Manuel utilisateur

Viessmann

Viessmann EA1 Manuel d'exploitation et d'entretien

Viessmann

Viessmann 5222 Manuel utilisateur

Viessmann

Viessmann VITOSOLIC 100 Manuel utilisateur

Viessmann

Viessmann VITOTRONIC 200 Guide rapide

Viessmann

Viessmann 5224 Manuel utilisateur

Viessmann

Viessmann VITOTRONIC SPS Mode d'emploi

Viessmann

Viessmann 5214 Manuel utilisateur

Viessmann

Viessmann Vitotronic 100 KW10B Mode d’emploi

Viessmann

Viessmann VITOTRONIC 200 Mode d'emploi

Viessmann

Viessmann VITOSOLIC 200 Guide rapide

Viessmann

Viessmann VITOTRONIC 200 Guide rapide

Viessmann

Viessmann VITOTRONIC 200 Manuel utilisateur

Viessmann

Viessmann PS10 Guide rapide

Viessmann

Viessmann VITOSOLIC 100 Guide rapide

Viessmann

Viessmann Vitotronic 100 GC1 Guide rapide

Viessmann

Viessmann VITOTRONIC 300 Manuel utilisateur

Viessmann

Viessmann vitotronic 200-h Manuel utilisateur

Viessmann

Viessmann VITOSOLIC 100 Mode d'emploi

Viessmann

Viessmann Vitocal WPR 300 Mode d'emploi

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur