Viessmann Vitocom 100 LAN1 Manuel technique

Autres manuels pour Vitocom 100 LAN1

1

Ce manuel convient aux modèles suivants

1

Autres manuels Viessmann Unité de contrôle

Viessmann

Viessmann LB1 Mode d'emploi

Viessmann

Viessmann EM-S1 Guide rapide

Viessmann

Viessmann EA1 Guide rapide

Viessmann

Viessmann VITOTRONIC 100 Guide rapide

Viessmann

Viessmann 5224 Manuel utilisateur

Viessmann

Viessmann GC1 Mode d’emploi

Viessmann

Viessmann 5221 Manuel utilisateur

Viessmann

Viessmann Vitotrol 350 Manuel utilisateur

Viessmann

Viessmann VITOSOLIC 100 Mode d'emploi

Viessmann

Viessmann VIVOTRONIC 050 HK3W Manuel utilisateur

Viessmann

Viessmann 5066 Manuel utilisateur

Viessmann

Viessmann AM1 Manuel utilisateur

Viessmann

Viessmann VITOSOLIC 200 Manuel d'instructions

Viessmann

Viessmann EM-M1 Guide rapide

Viessmann

Viessmann Vitotronic 100 KW10B Mode d’emploi

Viessmann

Viessmann Vitotrol 350-C Manuel utilisateur

Viessmann

Viessmann Cascade control unit Manuel de service

Viessmann

Viessmann VITOTRONIC 200 Guide rapide

Viessmann

Viessmann VITOTRONIC SPS Manuel utilisateur

Viessmann

Viessmann vitotronic 200-h Manuel utilisateur

Viessmann

Viessmann VITOTRONIC 300 Manuel utilisateur

Viessmann

Viessmann EM-EA1 extension Guide rapide

Viessmann

Viessmann VITOTRONIC 200 Mode d'emploi

Viessmann

Viessmann VITOSOLIC 200 Guide rapide

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur

Update manual for Vitocom 100 LAN1 / Vitocom 200 LAN2 with USB stick

Important hints:

The update file is located at www.vitocom.info „Software updates for Vitocom LAN devices”

This must be copied on a USB stick. It’s important, that this is the only file on the USB stick !

During the update the Vitocom must be connect to supply voltage.

During the update the USB stick must not be withdrawn !

1. To start the update, insert the USB stick into the USB inlet of the

Vitocom , see also

To check the LED display, please remove the cover by shifting it to the right and then lifting it (See also the manual of the

Vitocom)

2. After inserting the USB stick, the update starts automatically.

LED1

LED3

LED4

LED5

Normal operation

(Before Update)

Green

Green

Green

OFF

USB stick plugged

in.( Update starts)

OFF

Flashes shortly when

USB stick is inserted.

Fast blinking

Flashes shortly when

USB stick is inserted.

During update

process

OFF

OFF

Fast blinking green for

approx. 3 minutes.

OFF

During restart after

update

OFF

OFF

Slowly blinking green for

approx. 3 minutes.

OFF

Update done

(after approx. 5 min)

OFF

Green

Green

OFF

As soon as the update is done (after approx. 5 min), the USB stick can be removed again and may be reused for updates for

further Vitocoms . The success of the update can be checked with Vitodata100 or Vitodata 300. Therefore Vitotrol app users

just follow the menues “Settings info Vitodata/Vitocom”.

If the manual update cannot be performed successfully, please contact your Viessmann service partner.

display and operating elements

LED display (only visible when front cover removed)

„1“ LON Service LED ( green light)

„2“ Without function

„3“ IP link status ( yellow or green light)

„4“ Operation mode (red or green light)

„5“ Display data transmission when

using service interface (green light)

1 2 3 4

5

Update manual for Vitocom 300 LAN3 with USB stick

Important hints:

The update file is located at www.vitocom.info „Software updates for Vitocom LAN devices”

This file must be copied on a USB stick. It’s important, that this is the only file on the USB stick !

During the update the Vitocom must be connect to supply voltage.

During the update the USB stick must not be unplugged !

1. To start the update, insert the USB stick into the USB inlet of the Vitocom , see also

Typical sequence of the update process:

Time

[mm:ss]

Description

Information

00:00

USB stick inserted

LED3 OFF

00:05

Start copying update files

LED1 blinking (fast)

00:45

Display goes OFF (for approx. 5 sec.)

LED1 blinking (fast)

01:45

Display OFF and all LEDs OFF

03:15

Display OFF and LEDs blinking

LED1 blinking (slowly)

03:30

Vitocom restart. Display shows "Vitocom 300"

LED1 blinking (slowly)

04:30

Menu is displayed again

LED1 blinking (slowly)

05:10

Vitocom connected again with Vitodata Server.

LED1 und LED3 ON

Checking the new sotware version on the display:

1. Service > ok

2. Settings > ok

3. Software version >ok

In case of connected extension modules of type EM301, the whole update process can be up to 15 minutes long.

If the manual update cannot be performed successfully, please contact your Viessmann service partner.

Vitocom300 LAN3

LED Display

LED1 –Normal operation

LED2 –Error

LED3 - CON/ACT

In normal operation LED1 und LED3 is ON

During Update LED1 is important.