VIAIR 44043-440P Manuel utilisateur

MODEL NUMBER:

44043-440P PORTABLE COMPRESSOR

IMPORTANT:

It is essential that yo and any other

operator of the prod ct read and

nderstand the contents of this man al

before installing and sing this prod ct.

SAVE THIS MANUAL FOR FUTURE REFERENCE

USER MANUAL

IMPORTANT SAFETY INSTRUCTIONS

CAUTION – To red ce risk of electrical shock

or electroc tion:

• Do not disassemble. Do not attempt repairs or

modifications. Refer to q alified service agencies for all

service and repairs.

s Do not se this prod ct in or area where it can fall or be

p lled into water or other liq ids.

pDo not reach for this prod ct if it has fallen into liq id.

D Use this compressor with 12-volt DC systems only.

U This prod ct sho ld never be left nattended d ring

se.

WARNING – To prevent inj ry:

T Never allow children to operate this compressor. Close

s pervision is necessary when this compressor is being

sed near children.

This compressor will become very HOT d ring and

immediately after se. Do not to ch any part of this

compressor with bare hands, other than the ON/OFF

switch, d ring and immediately after se.

s Do not se this prod ct near flames or explosive

materials or where aerosol prod cts are being sed.

m Do not operate this prod ct where oxygen is being

administered.

a Do not p mp anything other than atmospheric air.

D Never se this prod ct while sleepy or drowsy.

N Do not se any tools or attachments witho t first

determining maxim m air press re for that tool or

attachment.

a Never point any air nozzle or air sprayer toward another

person or any part of a person’s body.

p This air compressor is eq ipped with an A tomatic

Reset Thermal Protector, and can a tomatically restart

after the thermal protector resets. Always c t off the

power so rce when thermal protector becomes

activated.

a Wear safety glasses or goggles when operating this

prod ct.

p Use only in well ventilated areas.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

Please read and follow the operating instr ctions

caref lly to ass re that yo will enjoy the convenience

and best se o t of yo r air compressor.

IMPORTANT:

1. Always operate the compressor at or BELOW THE

MAXIMUM PRESSURE RATING of the compressor. Refer

to the Specifications section of this man al for details.

2. Always OBSERVE THE MAXIMUM DUTY CYCLE of the air

compressor. Refer to Specifications section of this

man al for details. Operation exceeding maxim m

press re ratings and/or d ty cycle will res lt in damage to

the air compressor.

3. Yo r air compressor is eq ipped with an AUTOMATIC

THERMAL OVERLOAD PROTECTOR. This feat re is

designed to protect the air compressor from over-heating

and ca sing permanent damage to yo r air compressor.

The thermal overload protector will a tomatically sh t off

power to the air compressor sho ld internal operating

temperat re of the air compressor rise above safe levels

d ring excessive se.

4. Sho ld at any time d ring se, yo r air compressor

a tomatically sh ts off - do not attempt to restart. T rn

ON/OFF switch of air compressor to the OFF position. The

a tomatic thermal overload protector will a tomatically

reset when internal temperat re of the air compressor

drops below safe level. After allowing air compressor to

cool off for abo t 30 min tes, yo can safely res me se

of the air compressor by t rning the air compressor back

on.

5. Please note that yo may experience a slight delay (abo t

½ second) of the compressor’s motor starting when the

ON/OFF Switch is t rned ON while compressor is

press rized (when there is press re in the line that the

compressor is connected to). This is a normal delayed

reaction, not a Compressor ON/OFF Switch malf nction.

6. It is recommended that yo keep the vehicle’s engine

r nning while sing the air compressor to prevent

discharge of yo r vehicle’s battery. ONLY OPERATE THE

AIR COMPRESSOR IN WELL VENTILATED AREAS.

Compressor performance is enhanced when operating

compressor with vehicle engine r nning.

TIRE INFLATION & DEFLATION

IMPORTANT: Before attaching air compressor’s

power cord to power so rce, check to make s re that

the ON/OFF switch of yo r compressor is in the OFF

position. Attach the Positive battery clamp (Red) to

the Positive terminal of the battery and the Negative

battery clamp (Black) to the Negative terminal of the

battery. Keep yo r vehicle engine r nning while

operating compressor to avoid draining yo r

vehicle’s battery.

CAUTION: Yo r Portable Air Compressor is D st

and Moist re Resistant, b t NOT DUST OR

WATERPROOF. Never place compressor in soft sand

while r nning the compressor. Vibration from the

compressor will ca se the compressor to settle into

soft sand, res lting in compressor drawing in foreign

particles. Never expose compressor to water while

r nning the compressor.

IMPORTANT: Make s re compressor sits pright

while operating compressor. Avoid t gging at

compressor. Instead, move the compressor to the

same side of the vehicle as the tires that are being

aired p.

IMPORTANT: Always make s re the Portable

Compressor’s 8ft. power cord is ncoiled and f lly

extended when sing yo r air compressor to avoid

overheating the power cord.

5-in-1 INLINE

INFLATOR/DEFLATOR HOSE

OPERATION INSTRUCTIONS:

This air compressor comes with 3/8” q ick connect

st d. Yo r Inline Deflator comes with extension coil

hose with 3/8” q ick co pler. Simply attach this

m lti-f nction extension coil hose to the 3/8” q ick

connect st d and yo are ready to inflate tires. The

Inline Deflator/Inflator Hose can be sed for both

Airing Up and Airing Down. Please familiarize

yo rself with the following different f nctions of this

versatile air tool:

A. TIRE INFLATION:

1. Attach q ick connect co pler to air compressor.

2. P sh the tire ch ck, with the lever in the pright

position, down over the tire valve stem and then

p sh the lever down to the horizontal position to

lock in place.

3. Check to make s re the Deflator Collar Lock is

disengaged.

4. T rn compressor switch on to begin inflation.

When desired press re is reached, t rn

compressor off.

B. HANDS FREE CONTINUOUS DEFLATION:

1. P sh the tire ch ck, with the lever in the pright

position, down over the tire valve stem and then

p sh the lever down to the horizontal position to

lock in place.

2. P sh Deflator Collar toward tire valve stem and

t rn Deflator Collar clockwise to engage lock.

3. When desired press re if reached, t rn Deflator

Collar co nterclockwise to disengage lock.

C. INTERMITTENT DEFLATION:

1. The intermittent deflation f nction offers fast

downward press re adj stments.

2. With tire ch ck attached to tire valve stem, p sh

Deflator Collar toward tire valve stem to decrease

tire press re.

3. Release Deflator Collar to halt deflation.

D. INLINE PRESSURE GAUGE:

1. The 2-inch Inline Press re Ga ge provides

convenient tire press re monitoring when airing

p or down. This eliminates switching back and

forth between tire ch ck and tire press re ga ge.

2. Please note that d ring inflation and deflation,

d e to air velocity, the press re ga ge cannot

provide acc rate tire press re readings.

Momentarily halt inflation or deflation to obtain

acc rate tire press re readings.

SAFETY PRECAUTIONS

1. Always inflate tires to man fact rer’s

recommended tire press res. Exercise extreme

ca tion when driving with aired-down tires.

2. Never exceed 20 M.P.H. when driving with

partially inflated tires.

3. Never make sharp t rns while driving with

red ced tire press re.

4. Re-inflate tires before high speed traveling onto

roadways.

5. Only se heat-resistant, minim m 200 PSI-rated

working press re extension hose. Some

aftermarket hoses may not be s itable for se

with this air compressor d e to heat and

press re typically generated by this type of air

compressors.

6. Use of a close-ended tire ch ck will ca se

excessive press re b ild p if the tire ch ck is

not attached to tire valve stem while air

compressor is in operation.

7. IMPORTANT: Always se an Open-Ended tire

ch ck s ch as the tire ch ck eq ipped on the

Inflator/Deflator Coil Hose for tire inflation.

CAUTION: Never to ch the air compressor or

fittings connected to the air compressor with bare

hands d ring or immediately after se. The fittings on

extension hose will become very HOT d ring se. If

necessary, wear heat resistant gloves to remove

extension hose from primary hose.

MAINTENANCE & REPAIRS

1. Yo r air compressor is eq ipped with a

permanently l bricated, maintenance-free motor.

Never try to l bricate the compressor.

2. Reg larly clean d st and dirt from compressor

cooling fins and motor ho sing.

3. Only the Man fact rer or Man fact rer

a thorized service agencies sho ld perform

repairs.

SPECIFICATIONS

Part Nos. 44043 / 440P Portable

Motor Voltage: 12 volt

Motor Type: Permanent

Magnetic

Max. Working Press re: 150 PSI

Contin o s Use @ 72ºF & 30 PSI: 30 Min tes

Max. C rrent Cons mption: 40 amps

F se: 50 amps

Inline Press re Ga ge: 120 PSI

A to. Reset Thermal Protection: Yes

LIMITED WARRANTY

VIAIR Corporation warrants this pro uct, when properly installe an un er

normal con itions of use, to be free from efects in workmanship an

materials for a perio of one year from provi e ate of purchase. To receive

a replacement or for repairs, return the complete unit to retailer from whom

TROUBLESHOOTING CHART

PROBLEM POSSIBLE CAUSE(S) CORRECTIVE ACTION

Compressor will not

r n

1 No power, or switch in OFF position 1 Make s re compressor switch is ON

2 Blown f se 2

Disconnect compressor from power so rce,

replace f se. (Refer to Specifications section

for correct f se).

3 Motor overheats 3 Let compressor cool off for abo t 30 min tes

to allow thermal overload reset

Thermal Overload

Protector c ts o t

repeatedly

1Lack of proper ventilation or ambient

temperat re is too high 1

Move compressor to well ventilated area or

area with lower ambient temp.

2 Compressor valves failed 2 Replace compressor.

Excessive knocking or

rattling

1Worn bearing on eccentric or motor

shaft 1 Repair or replace compressor

2 Cylinder or piston ring is worn 2Repair or replace compressor

Compressor air flow

lower than normal, or

can’t p mp to higher

press res

1 Worn piston ring or inlet valve 1Repair or place compressor

it was purchase along with proof of purchase.

Returns shoul be ma e within the time perio an con itions of the retailer’s

policy for exchanges. If you are unable to contact your ealer, contact VIAIR

irectly for repairs or replacement at our option.

PLEASE NOTE:

THIS WARRANTY COVERS PRODUCT DEFECTS ONLY; IT DOES NOT

COVER INCIDENTAL OR CONSEQUENTIAL DAMAGES AS RESULT

OF MISUSE OR ABUSE.

Table des matières

Autres manuels VIAIR Compresseur d'air

VIAIR

VIAIR EXTREME Series Manuel utilisateur

VIAIR

VIAIR 28021 Manuel utilisateur

VIAIR

VIAIR 40044 Manuel utilisateur

VIAIR

VIAIR 15010 Manuel utilisateur

VIAIR

VIAIR 10163 KITS Manuel utilisateur

VIAIR

VIAIR 325C Manuel utilisateur

VIAIR

VIAIR 20008 Manuel utilisateur

VIAIR

VIAIR 330C-IG Manuel utilisateur

VIAIR

VIAIR 93 Manuel utilisateur

VIAIR

VIAIR EXTREME Series Manuel utilisateur

VIAIR

VIAIR 85 Manuel utilisateur

VIAIR

VIAIR 40043 Manuel utilisateur

VIAIR

VIAIR POWER SPORT Series Manuel utilisateur

VIAIR

VIAIR 300P SXS PORTABLE POWERSPORT Series Manuel utilisateur

VIAIR

VIAIR 450P-A Manuel utilisateur

VIAIR

VIAIR 10008 Manuel utilisateur

VIAIR

VIAIR 485C Manuel utilisateur

VIAIR

VIAIR 250C-IG Manuel utilisateur

VIAIR

VIAIR 400H-A Manuel utilisateur

VIAIR

VIAIR 40045-400P-A Manuel utilisateur

VIAIR

VIAIR 450P-RVS Manuel utilisateur

VIAIR

VIAIR 00093-90P Manuel utilisateur

VIAIR

VIAIR VMS 444DB Manuel utilisateur

VIAIR

VIAIR 00190 Manuel utilisateur

Manuels Compresseur d'air populaires d'autres marques

Sparmax

Sparmax DC-25XR Manuel utilisateur

KAESER

KAESER M122 Manuel utilisateur

GMC

GMC GAC1500 Manuel utilisateur

Briggs & Stratton

Briggs & Stratton Air Compressor Manuel utilisateur

Fini

Fini F3GST2TK Manuel utilisateur

Industrial Air

Industrial Air CP1580325 Manuel de programmation

Campbell Hausfeld

Campbell Hausfeld RP3300 Guide de démarrage rapide

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Manuel utilisateur

Hitachi

Hitachi EC99S Manuel de l'opérateur

Parkside

Parkside PKO 270 A1 Manuel utilisateur

Sullair

Sullair 185 Manuel utilisateur

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Manuel utilisateur

Ferm

Ferm CRM1046 Manuel utilisateur

BE AC153 Manuel utilisateur

RIDGID

RIDGID OF25150A Manuel utilisateur

Johnson Controls

Johnson Controls QUANTUM LX Manuel

Sears

Sears Craftsman 919.167463 Manuel utilisateur

Ring Automotive

Ring Automotive RAC700 Manuel utilisateur