VIA Technologies EPIA-NR Manuel utilisateur

User’s Manual

EPIA-NR

Version 1.0

June 15, 2007

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language, in any form or by any means, electronic, mechanical,

magnetic, optical, chemical, manual or otherwise without the prior written permission of VIA

Technologies, Incorporated.

Trademarks

All trademarks are the property of their respective holders. PS/2 is a registered trademark of

IBM Corporation. Award BIOS is a registered trademark of Phoenix Technologies Ltd.

Macrovision

Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; 6,516,132

licensed for limited viewing uses only. This product incorporates copyright protection

technology that is protected by certain U.S. patents and other intellectual property rights owned

by Macrovision and other rights owners. Use of this copyright protection technology must be

authorized by Macrovision, and is intended for home and other limited viewing uses only

unless otherwise authorized by Macrovision. Reverse engineering or disassembly is

prohibited.

Disclaimer

No license is granted, implied or otherwise, under any patent or patent rights of VIA

Technologies. VIA Technologies makes no warranties, implied or otherwise, in regard to this

document and to the products described in this document. The information provided in this

document is believed to be accurate and reliable as of the publication date of this document.

However, VIA Technologies assumes no responsibility for the use or misuse of the information

in this document and for any patent infringements that may arise from the use of this

document. The information and product specifications within this document are subject to

change at any time, without notice and without obligation to notify any person of such change.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class B digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference

to radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference, in which case the user will be required to correct the interference at his

personal expense.

Notice 1

The changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to comply with

the emission limits.

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

Safety Instructions

1. Always read the safety instructions carefully.

2. Keep this User's Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection hence protects the equipment from

overheating. DO NOT COVER THE OPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V before

connecting the equipment to the power inlet.

7. Place the power cord in such a way that people cannot step on it. Do not place anything

over the power cord.

8. Always unplug the power cord before inserting any add-on card or module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening. Liquid can cause damage or electrical shock.

11. If any of the following situations arises, get the equipment checked by a service personnel:

• The power cord or plug is damaged

• Liquid has penetrated into the equipment

• The equipment has been exposed to moisture

• The equipment has not work well or you cannot get it work according to User's

Manual.

• The equipment has dropped and damaged

• If the equipment has obvious sign of breakage

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED,

OR IN A STORAGE TEMPERATURE ABOVE 60oC (140oF). THE EQUIPMENT

MAY BE DAMAGED.

CAUTION: Explosion or serious damage may occur if the battery is

incorrectly replaced. Replace only with the same or equivalent

battery type recommended by the manufacturer.

BOX CONTENTS

One VIA Nano-ITX Mainboard

One VGA Ribbon Cable

One ATA-133/100 IDE Ribbon Cable

One Driver and Utilities CD

One IO Bracket

Two Screws for VGA Connector

Chapter 3

TABLE OF CONTENTS

Box Contents..................................................................................5

Table of Contents ...........................................................................6

Chapter 1 ......................................................................................8

Specifications..............................................................................8

Mainboard Specifications ..............................................................9

Mainboard Layout...................................................................... 11

Back Panel Layout ..................................................................... 12

Chapter 2 .................................................................................... 13

Installation ............................................................................... 13

CPU.......................................................................................... 14

Memory Module Installation........................................................ 16

Connecting the Power Supply...................................................... 17

Back Panel Ports........................................................................ 18

Connectors ............................................................................... 19

Jumpers ................................................................................... 25

Slots ........................................................................................ 27

Chapter 3 .................................................................................... 28

BIOS Setup............................................................................... 28

Entering Setup .......................................................................... 29

Control Keys ............................................................................. 30

Navigating the BIOS Menus ........................................................ 31

Getting Help.............................................................................. 32

Main Menu................................................................................ 33

Standard CMOS Features............................................................ 35

IDE Drives ................................................................................ 36

Advanced BIOS Features ............................................................ 37

CPU Feature.............................................................................. 41

Hard Disk Boot Priority............................................................... 43

Advanced Chipset Features......................................................... 44

AGP & P2P Bridge Control........................................................... 46

CPU & PCI Bus Control............................................................... 48

Integrated Peripherals................................................................ 49

VIA OnChip PCI Device............................................................... 50

USB Device Setting.................................................................... 51

BIOS Setup

Power Management Setup.......................................................... 53

Wakeup Event Detect................................................................. 55

PNP/PCI Configurations.............................................................. 57

PC Health Status........................................................................ 59

Frequency / Voltage Control ....................................................... 60

DRAM Clock/Drive Control .......................................................... 61

Load Fail-Safe Defaults............................................................... 63

Load Optimized Defaults............................................................. 64

Set Supervisor / User Password................................................... 65

Save & Exit Setup...................................................................... 67

Exit Without Saving ................................................................... 68

Chapter 4 .................................................................................... 69

Driver Installation...................................................................... 69

Driver Utilities ........................................................................... 70

CD Content............................................................................... 72

CHAPTER 1

Specifications

The ultra-compact and highly integrated VIA EPIA-NR uses the Nano-

ITX mainboard form-factor developed by VIA Technologies, Inc. as

part of the company’s open industry-wide total connectivity initiative.

The mainboard enables the creation of an exciting new generation of

small, ergonomic, innovative and affordable embedded systems.

Through a high level of integration, the Nano-ITX occupies only 50%

of the size of Mini-ATX mainboard form factor. The mainboard comes

with an embedded VIA Processor, boasting of ultra-low power

consumption, cool and quiet operation.

BIOS Setup

MAINBOARD SPECIFICATIONS

CPU

• VIA C7®1.0GHz NanoBGA2 processor

Chipset

• VIA CX700 Advanced All-in-One chipset

Graphics

• Integrated UniChrome™ Pro II 3D/2D AGP graphics with MPEG-2

video decoding acceleration

Audio

• VIA VT1708A High Definition Audio Codec

Memory

• 1 x DDR2 533 SODIMM slot (up to 1 GB)

Expansion Slot

• 1 x Mini-PCI slot

IDE

• 1 x UltraDMA 133/100 connector (2.54mm, 40-pin)

Serial ATA

• 2 x SATA connectors

LAN

• VIA VT6107 10/100 Mbps Fast Ethernet Controller or VIA VT6122

Gigabit Ethernet Controller (Optional)

Chapter 3

Back Panel I/O Ports

• 1 x RJ45 LAN port

• 1 x VGA port

Onboard I/O Connectors

• 1 x USB pin connector for 6 additional USB 2.0 ports

• 1 x LPC pin connector

• 1 x SMBus pin connector

• 2 x Serial port pin connectors (COM 1 5V/12V selectable)

• 2 x LVDS Power pin connectors

• 1 x LVDS Panel pin connector to support 2 single-channel LVDS

panels or 1 dual-channel panel (optional)

• 1 x CF (Compact Flash) Type I connector (shared with IDE, master /

slave select by jumpers)

• 1 x PS2 Mouse/Keyboard pin connector

• 1 x Audio pin connector for Line-out, Line-in, MIC-in, and S/PDIF out

• 1 x Front Panel pin connector

• 2 x Fan connectors for CPU and system fans

• 1 x Nano-ITX power connector

BIOS

• Award BIOS with LPC 4/8Mbit flash memory capacity

Form Factor

• Nano-ITX (8-layer)

• 12cm X 12cm

Table des matières

Autres manuels VIA Technologies Carte mère

VIA Technologies

VIA Technologies EPIA N-Series Manuel utilisateur

VIA Technologies

VIA Technologies NX 15000G - VIA EPIA Nano ITX Motherboard Manuel utilisateur

VIA Technologies

VIA Technologies epia-m860 Manuel utilisateur

VIA Technologies

VIA Technologies VAB-950 Manuel utilisateur

VIA Technologies

VIA Technologies ARTIGO A2000 - VIA ARTiGO Barebone Storage... Manuel utilisateur

VIA Technologies

VIA Technologies VAB-820 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-PE Manuel utilisateur

VIA Technologies

VIA Technologies VB8001-16 - VIA Motherboard - Mini ITX Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-NX Manuel utilisateur

VIA Technologies

VIA Technologies CM35-SC Manuel utilisateur

VIA Technologies

VIA Technologies KT600 Manuel utilisateur

VIA Technologies

VIA Technologies P4XB-S Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-P830 Manuel utilisateur

VIA Technologies

VIA Technologies Board Manuel utilisateur

VIA Technologies

VIA Technologies 10GWG21Q00020 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-E900 Manuel utilisateur

VIA Technologies

VIA Technologies VT82C694X Pro Manuel utilisateur

VIA Technologies

VIA Technologies EITX-3000 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-M930 Manuel utilisateur

VIA Technologies

VIA Technologies NAB-7400 Manuel utilisateur

VIA Technologies

VIA Technologies VAB-950 Manuel utilisateur

VIA Technologies

VIA Technologies Epia LT15000G Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-SN Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-P830 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur