VIA Technologies ENDAT-7500M Manuel utilisateur

IThe ENDAT-7500M/7515M System Board

ENDAT-7500M/7515M

User Manual

2008/3/25

Rev. A1

User Manual II

The content of this manual has been checked for accuracy. The manufacturer

assumes no responsibility for any inaccuracies that may be contained in this

manual. The manufacturer reserves the right to make improvements or

modification to this document and/or the product at any time without prior

notice. No part of this document may be reproduced, transmitted, photocopied or

translated into any language, in any form or by any means, electronic, mechanical,

magnetic, optical or chemical, without the prior written permission of the

manufacturer.

VIA C7® is registered trademark of VIATechnology Incorporation

VT8237R Plus may only be used to identify products of VIA Technology

Multiscan is a trademark of Sony Corp of America

IBM, EGA, VGA, PC/XT, PC/AT, OS/2 and PS/2 are registered trademarks of

International Business Machines Corporation

Plug and Play is registered trademarks of Intel Corporation

Microsoft, Windows and MS-DOS are trademarks of Microsoft Corporation

Award is a trademark of Phoenix Software Inc.

PCI is a registered trademark of PCI Special Interest Group

All trademarks are the properties of their respective owners.

Other product names mentioned herein are used for identification purpose only and

may be trademarks and/or registered trademarks of their respective companies.

Installation Notice

The manufacturer recommends using a grounded plug to ensure proper

motherboard operation.Care should be used in proper conjunction with a grounded

power receptacle to avoid possible electrical shock. All integrated circuits on this

motherboard are sensitive to static electricity. To avoid damaging components from

electrostatic discharge, please do not remove the board from the anti-static packing

before discharging any static electricity to your body, by wearing a wrist-grounding

strap. The manufacturer is not responsible for any damage to the motherboard due

to improper operation.

III The ENDAT-7500M/7515M System Board

Specification:

Model ENDAT-7500M / ENDAT-7515M

Form Factor Mini-ITX 170 mm x 170 mm (6.69”x6.69”) with 6 layers PCB

System Chipset VIA CN700(NB/2.5W)+ VIA VT8237R Plus (SB/1.8W)

CPU Supporting ENDAT-7500M: VIA V4 EDEN ULV 500MHz(1W)

ENDAT-7515M: VIA V4 C7-D 1.5GHz (20W)

Memory One 240Pin DDRII 533/400 DIMM up to 1GB

Ethernet VT8237R Plus integrated 10/100 Fast Ethernet w/ VT6103 (PHY)

VGA Integrated VIA UniChrome Pro 3D / 2D Graphics with SMA 16/32/64MB

Video Interface Integrated MPEG-2(DVD/DVB) Hardware decoder

Serial / Parallel 4 Serial Port w/ +5V, +12V Power Selector / 2 Parallel port

RS-422/485 Via COM2 (Optional)

Watchdog Timer Programmable WDT from 1 to 255 seconds / minutes by

Winbond W83697HG

IDE Connector 1 x 40pin IDE connector support UDMA 33/66/100/133,

1 x 44pin connector support Slim type HDD

SATA Connector 2 x 150MB/s SATA device support Raid 0, 1, JBOD

Expansion Slot 1x 32bits PCI slot

PS/2 Keyboard / Mouse Connector

2 USB port + RJ-45 LAN Connector(10/100)

VGA, LPT1 and COM1/COM2/COM3 with D-Sub connector

LPT2 with 2.0mm Box Header

COM4 with 2.54mm Box Header

1 IrDATX/RX port with Pin Header

Back Panel I/O

Pin Header for KB/MS, 4 x USB, SPDIF-IN/OUT,

SM Bus, KB/MS for external device

Power Supply ATX power supply

User Manual IV

TABLE OF CONTENTS

CHAPTER 1. INTRODUCTION .......................................................1

1-1. FEATURES..............................................................................................2

1-2. UNPACKING............................................................................................ 3

1-3. ELECTROSTATIC DISCHARGE PRECAUTIONS ................................... 3

1-4. MOTHERBOARD LAYOUT...................................................................... 4

CHAPTER 2. SETTING UP THE MOTHERBOARD.......................5

2-1. JUMPERS AND CONNECTORS.............................................................. 5

2-2. INSTALLING MEMORY.......................................................................... 13

2-3. SHARED VGA MEMORY....................................................................... 13

2-4. ASSIGNING IRQs FOR EXPANSION CARDS ....................................... 13

2-5. WATCHDOG TIMER…………………………………………………………. 14

CHAPTER 3. AWARD BIOS SETUP.............................................16

3-1. STANDARD CMOS FEATURES............................................................. 17

3-2. ADVANCED BIOS FEATURES............................................................... 18

3-3. ADVANCED CHIPSET FEATURES........................................................ 19

3-4. INTEGRATED PERIPHERALS............................................................... 21

3-5. POWER MANAGEMENT SETUP........................................................... 24

3-6. PnP/PCI CONFIGURATIONS................................................................. 26

3-7. PC HEALTH STATUS............................................................................. 27

3-8. FREQUENCY/VOLTAGE CONTROL ..................................................... 28

VThe ENDAT-7500M/7515M System Board

CHPATER 4. VGA, LCD, FEATURE..............................................29

4-1. VGA FEATURE....................................................................................... 29

4-2. DRIVER UTILITY INSTALLATION GUIDE.............................................. 30

CHPATER 5. LAN ADAPTER........................................................32

5-1. FEATURES ............................................................................................ 32

5-2. UTP CABLE/RJ-45 JACK DEFINITION.................................................. 33

5-3. CONNECTING 100BASE-TX FAST ETHERNET NETWORK ................ 34

5-4. CONNECTING 10BASE-T ETHERNET NETWORK .............................. 34

5-5. 10MBASE/ 100MBASE INSTALLATION NOTICE .................................. 34

5-6. REMOTE BOOT ROM FUNCTION ........................................................ 35

5-7. LED INDICATORS.................................................................................. 35

APPENDIX A: FLASH MEMORY UTILITY....................................36

APPENDIX B: LIMITED WARRANTY...........................................37

1The ENDAT-7500M/7515M System Board

Chapter 1. Introduction

ENDAT-7500M/7515M supports high performance processor of VIA C7 processor.

It also supports high speed DDR memory with 64-bit wide interfaces with non-ECC

DIMM (up to 1GB). Only Double Data Rate (DDRII) SDRAM memory is supported

and the speed of memory can be 400 and 533 MHz.

ENDAT-7500M/7515M provides an integrated graphics (S3 Graphics UniChrome™

Pro IGP) accelerator delivering cost competitive 3D, 2D, and video capabilities.

In addition to the integrated S3 Graphics UniChrome™ Pro IGP, featuring a 2D/3D

AGP8X graphics core with integrated MPEG-2 decoding for smooth DVD and digital

video playback, the VIA C7® processing platform also features support for high

bandwidth DDRII 400/533 MHz memory, motion compensation and DuoView for the

latest multiple format flat panel display devices.

ENDAT-7500M/7515M with native dual channel Serial ATA/RAID controller

provides direct support for two 150MB/s Serial ATA devices. The V-RAID controller

features native RAID 0, RAID 1 and JBOD support, ensuring optimum data integrity

and system performance. The user-friendly V-RAID software interface enables

easy disk array configuration and management.

ENDAT-7500M/7515M supports IEEE 802.3 compliant 10 / 100 Mbps PCI bus

master Ethernet MAC with standard MII interface to external PHYceiver.

The ideal solution of ENDAT-7500M/7515M

-POS system

-KIOSK

-Interactive system

-Airport Terminal Controller

-Industrial controller

-Digital entertainment

-Embedded system equipment

User’s Manual 2

1-1.Features

Basic Feature:

zBoard format: Mini-ITX (170mm x 170 mm)

zSupports 400/533 MHz FSB by VIAC7®

zSupports DDRII 400/533 MHz SDRAM up to 1GB

zSerial ATA connector x 2

zEnhance 40 Pin IDE connector x 1; 44 Pin IDE connector x 1

zMultiple I/O ports: COM port x 4; USB (2.0) x 6

zAll COM ports with +5V, +12V power selector

zWatchdog Timer

zVIA 10/100 LAN and Audio function onboard

zWith Intel embeddedATX PCI expansion design

zSupport ATX Power Supply

Optional features:

zRS 422/485 via COM 2

Full Software Support:

zDrivers for major operating systems and APIs: Windows 2000,

Windows XP, Direct3D, DirectDraw and DirectShow, OpenGL ICD

for Windows 2000, and DXVA for Windows 2000 and Windows XP

3The ENDAT-7500M/7515M System Board

1-2. Unpacking

The motherboard comes securely packaged in a sturdy cardboard shipping carton.

In addition to the User's Manual, the motherboard package includes the following

items:

ENDAT-7500M/7515M System Board

HDD / IO Cables

CDROM Driver includes: Drivers for Windows 2000, XP and AMI/AWARD FLASH

ROM utilities.

If any of these items are missing or damage, please contact the dealer from whom

you purchase the motherboard. Save the shipping material and carton in the event

that you want to ship or store the board in the future.

Note:

Please leave the motherboard in its original package until you are ready to

install it!

1-3. Electrostatic Discharge Precautions

Make sure you properly ground yourself before handling the motherboard, or other

system components. Electrostatic discharge can easily damage the components.

Note: You must take special precaution when handling the motherboard in dry or

air-conditioned environments.

User’s Manual 4

1-4. Motherboard Layout

5The ENDAT-7500M/7515M System Board

Chapter 2. Setting up the Motherboard

2-1. Jumpers and Connectors

Jumpers/Connectors Overview:

Function Jumpers/Connectors

ATX Power Connector ATXPWR

Cooling Fan Connector FAN1, FAN2

Buzzer BUZZ1

Battery BAT1

Clear CMOS JBAT1

DDR2 SDRAM socket DIMM1

IR Pin Header JP2

PS/2 MS/KB Pin Header CN2

PS/2 MS/KB Connector JKBMS1

OEM MS/KB Pin Header CN1

USB Port CN3, JUSB1, JUSB2

Pin Header for Case Panel JP10

HDD active LED JP10: Pin 1(-), Pin 2(+)

External Speaker JP10: Pin 3, Pin 6

Buzzer On/Off JP10: Pin 4, Pin 5

Hardware Reset Switch JP10: Pin 7, Pin 8

ATX Power Supply On/Off Switch JP10: Pin 9, Pin 10

Power LED JP10: Pin 11(-), Pin 12(+)

WDT Function Enable/Disable JP10: Pin 13, Pin 14

LAN Connector CN3

CRT Output CN5

CRT Box Header CN6

COM1 COM1

COM2, COM3 CN7

COM4 Box Header CN9

COM Port Voltage Selector JP7

RS232 / 422/ 485 Selector for COM2 JP3 & JP4

SMBus Pin Header JP5

PCI SLOT PCI1

LPT1, LPT2 LPT1, LPT2

SATA 1, SATA 2 SATA1, SATA2

User’s Manual 6

Function Jumpers/Connectors

40-Pin IDE Connector IDE1

44-Pin IDE Connector IDE2

SPDIF Pin Header SPDIF1

DIMM Power LED LED1

System Power LED LED2

Please double-check the insertion and orientation of the LCD cable

before applying power. Improper installation will result in permanent

damage LCD panel.

Part 1: Onboard Jumpers

JBAT1: CMOS Data Clear (2.0mm)

Pin No. Function

Pin 1-2 Normal (Default)

Pin 2-3 Close for clear CMOS

JP1: LVDS Voltage Selector (2.0mm)

Pin No. Function

Pin-1, 2 * +3.3V

Pin-3, 4 +5V

Pin-5, 6 +12V

Caution: Improper setting will damage LCD panel.

JP10: Pin Header for Case Panel (2.54mm)

Pin No. Function

1(-), 2(+) HDD active LED

3,6 External Speaker

4,5 Buzzer On/Off

7,8 Hardware Reset Switch

9,10 ATX Power On/Off

11(-),12(+) Power LED

13,14 Close: Enable WDT function

7The ENDAT-7500M/7515M System Board

JP3, JP4: RS232 / 422 / 485 Selector for COM2 (2.0mm)

TYPE JP3 (2x3/2mm) JP4 (3x4/2mm)

RS-232 * 1-2 1-2, 4-5, 7-8, 10-11

RS-422 3-4 2-3, 5-6, 8-9, 11-12

RS-485 5-6 2-3, 5-6, 8-9, 11-12

JP7: COM Port Voltage Selector (2.0mm)

Voltage +12V(DC) R.I. * +5V(DC)

COM1 (JP7) 1-2 3-4 5-6

COM2 (JP7) 7-8 9-10 11-12

COM3 (JP7) 13-14 15-16 17-18

COM4 (JP7) 19-20 21-22 23-24

Part 2: Onboard connectors

JP2: IR Pin Header Connector (2.54mm)

Pin No. Function Pin No. Function

Pin 1 VCC Pin 4 GND

Pin 2 N.C Pin 5 IRTX

Pin 3 IRRX

JP5: SM Bus Pin Header (2.0mm)

Pin No. Function Pin No. Function

1 SMBCK 3 +3.3V

2 SMBDT 4 GND

SPDIF1: SPDIF Box Header Connector (2.0mm)

Pin No. Function Pin No. Function

1 +5V 4 GND

2 N.C. 5 SPDIFIN

3 SPDIFOUT

User’s Manual 8

CN1: Pin Header for external device (2.0mm)

Pin No. Signal (KB) Pin No. Signal (MS)

1 KB Data Out 2 MS Data Out

3 KB Data In 4 MS Data In

5 KB CK Out 6 MS Data Out

7 KB CK In 8 MS CK In

9 KEY 10 KEY

11 +5V(DC) 12 +5V(DC)

13 GND 14 GND

CN2: PS/2 Keyboard / Mouse Pin Header Connector (2.0mm)

Pin No. Signal (KB) Pin No. Signal (MS)

1 KB Data 2 MS Data

3 KEY 4 KEY

5 GND 6 GND

7 +5V(DC) 8 +5V(DC)

9 KB_CLK 10 MS_CLK

CN6: CRT Box Header Connector (2.0mm)

Pin No. Description Pin No. Description

1 RED 9 N.C / +5V

2 GREEN 10 GND

3 BLUE 11 N.C.

4 N.C. 12 DDC DAT

5 GND 13 H-Sync

6 GND 14 V-Sync

7 GND 15 DDC CLK

8 GND

FAN1, FAN2: CPU / 2nd Cooling Fan Connector

Pin No. Function

1 GND

2 +12V

3 Sensor Pin

9The ENDAT-7500M/7515M System Board

ATXPWR: ATX Power connector

ATX

3.3V 11 1 3.3V

–12V 12 2 3.3V

GND 13 3 GND

PS ON 14 4 +5V

GND 15 5 GND

GND 16 6 +5V

GND 17 7 GND

–5V 18 8 POWER OK

+5V 19 9 5V SB

+5V 20 10 +12V

LPT2: Printer (LPT2) Port Box Header (2.0mm)

Pin No. Description Pin No. Description

1 STB# 10 ACK#

2 PD0 11 BUSY

3 PD1 12 PE

4 PD2 13 SLCT

5 PD3 14 AFD#

6 PD4 15 ERR#

7 PD5 16 INIT#

8 PD6 17 SLIN#

9 PD7 18-25 GND

JUSB1 JUSB2: Pin Header Type Connector for USB port (2.54mm)

Pin No. Function Pin No. Function

1 USB_VCC 2 USB_VCC

3 USBD2-/4- 4 USBD3-/5-

5 USBD2+/4+ 6 USBD3+/5+

7 USB_GND 8 USB_GND

9 USB_GND 10 USB_GND

User’s Manual 10

CN9: Box Header Type Connector for COM4 port (RS-232) (2.54mm)

Pin No. Function Pin No. Function

1 DCD 6 DSR

2 RXD 7 RTS

3 TXD 8 CTS

4 DTR 9 RI

5 GND 10 N.C.

D-SUB Type Connector for COM1 ~ COM3 port (RS-232)

Pin No. Description Pin No. Description

1 DCD 6 DSR

2 RXD 7 RTS

3 TXD 8 CTS

4 DTR 9 RI

5 GND

D-SUB Type Connector for COM2 port (RS-422Æ4 Wire)

Pin No. Function Pin No. Function

1 –TXD 6 NA

2 +RXD 7 NA

3 +TXD 8 NA

4 NA 9 –RXD

5 NA

D-SUB Type Connector for COM2 port (RS-485Æ2 Wire)

Pin No. Function Pin No. Function

1 Data – 6 NA

2 NA 7 NA

3 Data + 8 NA

4 NA 9 NA

5 NA

11 The ENDAT-7500M/7515M System Board

IDE1: IDE1 Connector (40Pins)

Pin No. Description Pin No. Description

1 IDE Reset# 2 GND

3 IDE data7 4 IDE data8

5 IDE data6 6 IDE data9

7 IDE data5 8 IDE data10

9 IDE data4 10 IDE data11

11 IDE data3 12 IDE data12

13 IDE data2 14 IDE data13

15 IDE data1 16 IDE data14

17 IDE data0 18 IDE data15

19 GND 20 N.C.

21 IDE REQ 22 GND

23 IDE IOW# 24 GND

25 IDE IOR# 26 GND

27 IDE Ready 28 GND

29 IDE ACK# 30 GND

31 IDE IRQ 32 N.C.

33 IDE A1 34 P66DET

35 IDE A0 36 IDE A2

37 IDECS1# 38 IDESC3#

39 HDLED# 40 GND

User’s Manual 12

IDE2: Slim IDE2 Connector (44Pins with 2.0mm)

Pin No. Description Pin No. Description

1 IDE Reset# 2 GND

3 IDE data7 4 IDE data8

5 IDE data6 6 IDE data9

7 IDE data5 8 IDE data10

9 IDE data4 10 IDE data11

11 IDE data3 12 IDE data12

13 IDE data2 14 IDE data13

15 IDE data1 16 IDE data14

17 IDE data0 18 IDE data15

19 GND 20 N.C.

21 IDE REQ 22 GND

23 IDE IOW# 24 GND

25 IDE IOR# 26 GND

27 IDE Ready 28 GND

29 IDE ACK# 30 GND

31 IDE IRQ 32 N.C.

33 IDE A1 34 P66DET

35 IDE A0 36 IDE A2

37 IDECS1# 38 IDESC3#

39 HDLED# 40 GND

41 VCC(+5V) 42 VCC(+5V)

43 GND 44 N.C.

13 The ENDAT-7500M/7515M System Board

2-2. Installing Memory

ENDAT-7500M/7515M system board offers one 240 pin DDRII SDRAM socket

supports up to 1GB memory and the speed can be 400 and 533 MHz.

2-3. Shared VGA Memory

ENDAT-7500M/7515M is using built-in AGP VGA controller with S3 Graphics

UniChrome Pro IGP graphics core up to 64MB of system memory. The amount of

video memory on motherboard determines the number of colors and the video

graphic resolution.

2-4.Assigning IRQs for Expansion Cards

Some expansion cards require an IRQ (Interrupt request vector) to operate.

Generally, each IRQ must be exclusively assigned to specific use. In a standard

design, there are 16 IRQ available with 11 of them already in used by other part of

the system.

Some PCI expansion cards need IRQ; any remaining IRQ could be assigned to

PCI Bus. Microsoft's Diagnostic (MSD.EXE) utility included in the Windows

directory can be used to see their map. Clients can not have more than one device

apply the same IRQ in the system or it will cause the system hang up, crash, and

unexpected results. To simplify the process, this motherboard complies with the

Plug and Play (PnP) specifications, which was developed to allow automatic

system configuration. Whenever a PnP-compliant card is added to the system,

PnP card and IRQs will automatically assigned if available. The PCI and PnP

configuration in the BIOS setup utility can indicate which IRQs have being used by

Legacy cards.

In the PCI Bus design, the BIOS is automatically assigned an IRQ to a PCI slot that

has a card in it which requires an IRQ. To install PCI cards via riser card, you need

to set the correct "ADSEL" and "INT" (interrupt) assignment on the jumper of riser

card.

User’s Manual 14

IRQ Status Assignment

0 Used Timer

1 Used Keyboard

2 Used Second 8259

3 Used COM2

4 Used COM1

5 Used COM3

6 Used Floppy Disk

7 Used LPT1

8 Used RTC

9 Used LPT2 or Audio

10 Used COM4

11 Used LAN Adapter (on board)

12 Used PS/2 Mouse

13 Used Coprocessor

14 Used Hard Disk (IDE 1)

15 Used Reserved (IDE 2)

2-5.Watchdog Timer

Watchdog Timer (WDT) is a special design for system monitoring to secure the

system work normally. WDT has an independent clock from the oscillator and could

set time and clear/refresh WDT counter function. When time is up, WDT will send

hardware RESET signal to reset system.

Timeout Value Range

-1 to 255

-Second or Minute

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels VIA Technologies Carte mère

VIA Technologies

VIA Technologies EPIA-M Mini-ITX Manuel utilisateur

VIA Technologies

VIA Technologies EPIA M-Series Mini-ITX Mode d’emploi

VIA Technologies

VIA Technologies KT880 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA Mini-ITX Mode d’emploi

VIA Technologies

VIA Technologies VB8002 Manuel utilisateur

VIA Technologies

VIA Technologies SOM-3000-STK Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-P710 Manuel utilisateur

VIA Technologies

VIA Technologies P4X266-PE11-L Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-PN Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-EK10000G - VIA Motherboard - Mini ITX Manuel utilisateur

VIA Technologies

VIA Technologies P4X266-PE11-SA Manuel utilisateur

VIA Technologies

VIA Technologies VAB-950 Manuel utilisateur

VIA Technologies

VIA Technologies P4M890 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA PD-Series Manuel utilisateur

VIA Technologies

VIA Technologies VX800 Series Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-M850 Manuel utilisateur

VIA Technologies

VIA Technologies VB8001 Manuel utilisateur

VIA Technologies

VIA Technologies VB8001-16 - VIA Motherboard - Mini ITX Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-LT Manuel utilisateur

VIA Technologies

VIA Technologies VT82C686A Manuel utilisateur

VIA Technologies

VIA Technologies P4PB ULTRA-URL Manuel utilisateur

VIA Technologies

VIA Technologies 10GWG21Q00020 Manuel utilisateur

VIA Technologies

VIA Technologies CN700 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-M800 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur