Vertiv Liebert ITA2 Instructions d'installation et d'entretien

Liebert®

ITA2™ UPS

Installer/User Guide

8-kVA to 10-kVA, 60-Hz, 208/220-V, Three-phase UPS

Vertiv | Liebert® ITA2™ Installer/User Guide

Technical Support Site

If you encounter any installation or operational issues with your product, check the pertinent

section of this manual to see if the issue can be resolved by following outlined procedures.

Visit https://www.VertivCo.com/en-us/support/ for additional assistance.

The information contained in this document is subject to change

without notice and may not be suitable for all applications. While

every precaution has been taken to ensure the accuracy and

completeness of this document, Vertiv assumes no responsibility

and disclaims all liability for damages resulting from use of this

information or for any errors or omissions. Refer to other local

practices or building codes as applicable for the correct methods,

tools, and materials to be used in performing procedures not

specifically described in this document.

The products covered by this instruction manual are manufactured

and/or sold by Vertiv. This document is the property of Vertiv and

contains confidential and proprietary information owned by Vertiv.

Any copying, use or disclosure of it without the written permission

of Vertiv is strictly prohibited.

Names of companies and products are trademarks or registered

trademarks of the respective companies. Any questions regarding

TABLE OF CONTENTS

Important Safety Information 1

1 Product Description 3

1.1 Front-panel Components 3

1.2 Rear-panel Components 4

1.3 UPS States and Operating Modes 5

1.3.1 Normal Mode 6

1.3.2 Battery Mode 7

1.3.3 Bypass Mode 8

1.3.4 Auto Restart Mode 9

1.3.5 Fault State 9

1.3.6 Maintenance Bypass Mode 9

2 Installation 11

2.1 Pre-installation Preparation 11

2.1.1 Environment of Installation Area 12

2.1.2 Installation Clearances 12

2.1.3 Installation Tools 13

2.1.4 Storage 13

2.1.5 External Protective Devices 13

2.2 Equipment Handling and Unpacking 15

2.3 Tower Installation 15

2.4 Rack Installation 17

2.5 Connecting Power Cables 19

2.5.1 Connecting a Single-input Configuration 20

2.5.2 Connecting a Dual-input Configuration 23

2.6 Connecting a Single Battery-cabinet System 24

2.6.1 Connecting the Cables 24

2.7 Connecting Additional Battery-cabinet systems 32

2.8 Communication Connections 35

2.8.1 Liebert® IntelliSlot™ Ports 35

2.8.2 REPO Connection 36

2.8.3 Dry-contact Connections 37

2.8.4 Connecting USB Communication Cables 38

2.9 Connecting Serial-port Communication Cables 38

2.9.1 Connecting Multi-function Port (RJ-45) 39

3 Operation and Display Panel 41

3.1 LED Indicators 42

3.2 Audible Alarm (Buzzer) 42

3.3 LCD Menu and Screens 43

3.3.1 Start-up and UPS Mimic Screens 44

3.3.2 Main Menu 44

3.4 Editing Display and Operation Settings 48

3.4.1 Changing the Password 51

3.4.2 Selecting the Display Language 52

3.4.3 Setting the Date and Time 52

4 Operating the UPS 53

4.1 Silencingthe Audible Alarm 53

4.2 UPS Start-up 53

4.3 Transferring from Normal (Inverter) to Bypass Mode 54

4.4 Transferring from Bypass to Normal (Inverter) Mode 55

4.5 Transferring to Maintenance-bypass Mode 56

4.6 Transferring from Maintenance-bypass to Normal Mode 56

4.7 Remote Emergency Power-off (REPO) 57

5 Maintenance 59

5.1 Cleaning the UPS 59

5.2 Routine Maintenance 59

6 Specifications 63

6.1 Standard Battery Back-up Time with a Single UPS 65

Appendices 67

Appendix A: UPS Prompts and Alarms 67

Vertiv | Liebert® ITA2™ Installer/User Guide

IMPORTANT SAFETY INFORMATION

IMPORTANT! This manual contains important safety instructions that must be followed during the

installation and maintenance of the UPS and batteries. Read this manual thoroughly and the safety and

regulatory information, available at https://www.vertiv.com/ComplianceRegulatoryInfo, before

attempting to install, connect to supply, or operate this UPS.

Vertiv | Liebert® ITA2™ Installer/User Guide

This page intentionally left blank

1 PRODUCT DESCRIPTION

The Liebert® ITA2™ uninterruptible power system (UPS) is an intelligent, online UPS with sine wave

output. The UPS offers reliable, high-quality AC power to small-scale computer centers, networks,

communication systems, automatic control systems, and similar sensitive electronic equipment.

1.1 Front-panel Components

The front panel of the UPS provides ventilation holes and an operation/display panel with LED indicators

and function keys.

Figure 1.1 ITA2 UPS

Item Description

1 Ventilation holes

2 Menu keys, see 1.1 above.

3 LCD panel. See Operation and Display Panel on page 41.

4 Run/Alarm indicator LEDs, see LED Indicators on page 42.

5 Power button, see 1.1 above.

1 Product Description 3

1.2 Rear-panel Components

Figure 1.2 UPS Rear Panel with Terminal-block Battery Connectors

Item Description

1 Liebert® IntelliSlot™ port

2 Dry-contact port

3 REPO port

4 RS-232 port

5 Multi-function port

6 Parallel/LBS ports

7 Ventilation holes

8 AC-output terminals

9 AC-input terminals

10 Ventilation holes

11 Battery-input terminals

12 USB port

Vertiv | Liebert® ITA2™ Installer/User Guide

Figure 1.3 UPS Rear Panel with Plug-n-Play Battery Connectors

Item Description

1 Liebert® IntelliSlot™ port

2 Dry-contact port

3 REPO port

4 RS-232 port

5 Multi-function port

6 Parallel/LBS ports

7 Ventilation holes

8 AC-output terminals

9 AC-input terminals

10 Ventilation holes

11 Battery-connector ports

12 USB port

1.3 UPS States and Operating Modes

NOTE: See Table 3.2 on page42, for description of the run-indicator and alarm-indicator LEDs

mentioned in this section.

1 Product Description 5

1.3.1 Normal Mode

Normal operation supplies clean, conditioned, sine-wave power to connected equipment from normal

utility input. The battery charger charges the batteries. On the front-panel display, the run-indicator

(green)is On, the alarm indicator is OFF, and the buzzer is silent.

Figure 1.4 Normal-mode Operation

Vertiv | Liebert® ITA2™ Installer/User Guide

Autres manuels pour Liebert ITA2

Table des matières

Autres manuels Vertiv UPS

Vertiv

Vertiv PSA4-1000MT120 Instructions d'installation et d'entretien

Vertiv

Vertiv Desktop UPS Manuel utilisateur

Vertiv

Vertiv Liebert GXT5 Instructions d'installation et d'entretien

Vertiv

Vertiv Liebert PST4-660MT120 Instructions d'installation et d'entretien

Vertiv

Vertiv Liebert PSI PS2200RT3-120 Manuel utilisateur

Vertiv

Vertiv Liebert EXM2 Manuel utilisateur

Vertiv

Vertiv Liebert EXM Manuel utilisateur

Vertiv

Vertiv Liebert EXS 80kVA UPS Manuel utilisateur

Vertiv

Vertiv Liebert ITA2 Manuel utilisateur

Vertiv

Vertiv Liebert GXT5-500LVRT2UXL Guide de l'utilisateur

Vertiv

Vertiv Liebert CW Series Guide de l'utilisateur

Vertiv

Vertiv Liebert GXT3 Series Instructions d'installation et d'entretien

Vertiv

Vertiv Liebert Instructions d'installation et d'entretien

Vertiv

Vertiv Liebert ITA2 30kVA Manuel utilisateur

Vertiv

Vertiv Liebert ITA2 Manuel utilisateur

Vertiv

Vertiv Liebert GXT5-8000HVRT5UXLN Manuel utilisateur

Vertiv

Vertiv Liebert GXT-MT+10KVA Manuel utilisateur

Vertiv

Vertiv Liebert ITA2-08KRT208 Manuel utilisateur

Vertiv

Vertiv Liebert NXL 500kVA Manuel utilisateur

Vertiv

Vertiv Liebert APS series Guide de l'utilisateur

Vertiv

Vertiv Liebert EXL Manuel utilisateur

Vertiv

Vertiv Liebert ITA2 Manuel utilisateur

Vertiv

Vertiv Liebert PST4-350MT120 Instructions d'installation et d'entretien

Vertiv

Vertiv Liebert GXT4 Series Instructions d'installation et d'entretien

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur