VeriFone Vx-520 Series APACS 40 Manuel utilisateur
VX520 Shortcuts and Instructions - EPX
Running a transaction
If in the main menu, select “Credit/Debit”
Once in the Sale screen, select the “Sale” option – F2
Enter the amount, push the green button, “enter”
It will ask you to confirm the amount, select “ok” if correct
At this point, you can swipe the card, insert the chip, or use a phone to pay with a mobile app
or other NFC device.
Using the EMV / Chip card
1. Position a smart card with the contacts facing upward (see Figure 21).card transaction
2. Insert the smart card into the smart card reader slot in a smooth, continuous motion
until it seats firmly.
3. Certain Bank issued cards (Debit on the card) will prompt you to select Visa or
MasterCard Debit.
4. Remove the card only when the application indicates the transaction is complete.
Leave the smart card in the card reader until the transaction is complete. Premature card
removal will invalidate the transaction.
***If you swipe a card that has a chip, you will get the message “USE CHIP READER” select the
green “enter” button and wait for it to prompt you to inset the card. DO NOT insert the chip
card during that error message.
The receipt will print and may prompt you to print a customer receipt.
***If the chip reader gets locked out or stops working, unplug the terminal and plug it back in
to reset it.
Gift Cards
If you are in the “Sale” screen press the “*” button to get to the main menu
If in the main menu, select “Valutec” or “Gift Card” and follow those steps
Support Phone Numbers
PayProTec Technical Support 1-800-226-2273
PayProTec Customer Relations 1-800-360-2591
PaymentsHub Support 1-877-464-4218
www.paymentshub.com
Adjusting the Date and time
*The terminals are set up to run on Military (24 hour) time. Make sure your download sheet
specifications reflect that. Example: Auto Close, 22:00
In the sale screen, press the green “enter” button
Select setup (F2)
Enter the password: 000000
Press the green “enter” button
Use the purple “more” key under the arrow, four times until you see “Date/Time” to the right
Select Date/Time (F4)
Enter the date: example 08/02/2015
Enter the time: example 14:23:00
Press the green “enter” button
Press the red “X” button to return to the sale’s screen
Changing the Communication Method
In the sale screen, press the number “6” button
Enter the password: 000000
Press the green “enter” button
Select Communications (F4)
Select View (F2)
If Set as Dial and you need to change it to Commserver:
You will see “NAB Auth Comm” - Dial
Select Edit (F3)
Select Next (F2) – will see “CommServer”
Select Slct (F3)
Select Next (F2) three times until you see “NAB Settle Comm” - Dial
Select Edit (F3)
Select Next (F2) – will see “CommServer”
Select Slct (F3)
Select Exit (F4)
If Set as CommServer and you need to change it to Dial:
You will see “NAB Auth Comm” - Commserver
Select Edit (F3)
Select Next (F2) – will see “Dial”
Select Slct (F3)
Select Next (F2) three times until you see “NAB Settle Comm” - Commserver
Select Edit (F3)
Select Next (F2) – will see “Dial”
Select Slct (F3)
Select Exit (F4)
Press the red “X” button to return to the Sale Screen
Changing the Receipt Printing to Confirm Copy or Auto print
In the sale screen, press the number “6” button
Enter the password: 000000
Press the green “enter” button
Select Terminal (F3)
Select View (F2)
Select next (F2) four times until you see “Customer Copy”
Select Edit (F3)
To change to Auto print receipt:
Select Next (F2) two times, you will see “Automatic”
Select Slct (F3)
Select Exit (F4)
To change to confirm copy receipt:
Select Next (F2) one time, you will see “Confirm”
Select Slct (F3)
Select Exit (F4)
Press the red “X” button to return to the Sale Screen
Changing the Settlement Reports
In the sale screen, press the green “enter” button
Select setup (F2)
Enter the password: 000000
Press the green “enter” button
Use the purple “more” key under the arrow, two times until you see “Merchant IDs” to the
right
Select “Merchant IDs” (F1)
Select Next (F2) eight times until you see “Prt Sttl Rpts”
Select Edit (F3)
To change to Detail report only:
Select Next (F2) one time, you will see “Detail Rpt”
Select Slct (F3)
Select Exit (F4)
When asked to Save Changes, select “OK” (F2)
To change to Total report only:
Select Next (F2) two times, you will see “Total Rpt”
Select Slct (F3)
Select Exit (F4)
When asked to Save Changes, select “OK” (F2)
To change to print both Totals and Detail reports:
Select Next (F2) three times, you will see “Both Rpts”
Select Slct (F3)
Select Exit (F4)
When asked to Save Changes, select “OK” (F2)
Adjusting the Header and Footer Information on a Receipt
In the sale screen, press the green “enter” button
Select “Menu/Keys” (F4)
Enter the password: 000000
Press the green “enter” button
Select “Printer” (F4)
Select “Slct” (F2)
Select Next (F2) and change the lines needed for the (the first four are the header)
Screens 5-7 are to add footer messages
On any lines you need to change, select “edit” (F3)
Type in the desired changes using the keys and “alpha” button
When finished with that line, press the green “enter” button
When finished, Select “Exit” (F4)
When asked to Save Changes, select “OK” (F2)
Press the red “X” button to return to the Sale Screen
Changing the Auto Settle Time – (if you have auto settle)
In the sale screen, press the number “6” button
Enter the password: 000000
Press the green “enter” button
Select Terminal (F3)
Select View (F2)
Select next (F2) twelve times until you see “AutoSett Time”
Select Edit (F3)
Type in the new time, example: 233000
Press the green “enter” button
Select Exit (F4)
Press the red “X” button to return to the Sale Screen
Unlocking the Keyboard
In the sale screen, press the number “8” button
It will ask for a password
Enter the password: 000000
It will then ask, “lock Keyboard?”
Press F2 for NO
Changing the Language between English and Spanish
In the sale screen, press the number “7” button
It will then ask, “language
Press F1 for English
Press F2 for Spanish
Reprinting a Batch Detail
In the sale screen, press the purple “reports” button
Press the purple “more” button two times
Press F1 for Batch History
Press F2 for the Date
Enter the desired date, example 041517
Turning On the Server Prompt – Clerk ID
In the sale screen, press the number “6” button
Enter the password: 000000
Press the green “enter” button
Select Terminal (F3)
Select View (F2)
Select next (F2) three times until you see “Clerk ID”
Select Edit (F3)
To change to Prompt on:
Select Edit (F3)
Select Prompt (F3)
Select Exit (F4)
Turning Off the Server Prompt – Clerk ID
In the sale screen, press the number “6” button
Enter the password: 000000
Press the green “enter” button
Select Terminal (F3)
Select View (F2)
Select next (F2) three times until you see “Clerk ID”
Select Edit (F3)
To change to Prompt off:
Select Edit (F3)
Select None (F1)
Select Exit (F4)
Adding Servers to the Terminal – (each one has to be done individually)
In the sale screen, press the green “enter” button
Select Servers (F3)
Select “Add Server” (F4)
Enter the password: 000000
Press the green “enter” button
It will ask for a Clerk ID #
Enter the desired Server ID
Press the green “enter” button
It will ask for a password (5-10) characters
Enter in the password for that server
Press the green “enter” button
It will ask for confirmation on that password
Enter in the password for that server again
Press the green “enter” button
When finished, press the red “X” key two times to return to the sale screen
! !
!
Trouble!shooting!Connection!Errors!on!a!Verifone!VX520!
!
If!the!terminal!is!not!processing!over!the!internet!or!is!processing!slowly.!
!
In!the!sale!screen,!press!the!number!“6”!button!
Enter!the!password:!000000!
Press!the!green!“enter”!button!
Select!Communications!(F4)!
Select!View!(F2)!
!
Make!sure!that!is!says!“CommServer”!on!the!screen!
If!it!says!“Dial”!follow!the!instructions!to!change!it!to!CommServer!
!
!
To!Test!where!the!breakdown!might!be:!
!
Press!the!“*”!button!next!to!the!number!“0”!button!
!
In!the!Main!Home!Screen!Menu,!You!will!see!
CommServer!–!(F2)!
Credit/Debit!–!(F3)!
!
Press!“CommServer”!(F2)!
!
In!your!terminal!screen!the!image!for!VCS!Ethernet!will!show!up.!
!
At!the!bottom!of!the!screen!you!will!see!the!Wrench!and!Tool!with!a!purple!button!below!
it!“more”!
Press!that!purple!“more”!button!
!
To!check!the!connection!status,!press!“troubleshoot”!–!F3!
!
It!will!Ping!two!IP!addresses!and!some!test!URLs!
!
If!all!is!working!properly,!they!will!flash!up!and!be!“OK”!after!each!
!
It!will!either!take!you!to!the!previous!screen!or!select!the!red!”X”!to!take!you!back!
!
I!recommend!selecting!“Repair”!–!F4!after!checking!
!
If!the!connection!to!the!hardware!in!your!network!is!broken,!you!will!see,!“Not!connected!
to!the!Network”!or!“no!response”!
!
If!the!connection!to!the!network!is!OK,!but!the!internet!connection!to!the!internet!is!
broken,!you!will!see!
IP!XXXXXXXXXX!–!OK!
!
IP!XXXXXXXXXX!–!Ok!or!“failed”!
!
www.verifone.com!-!“Failed”!or!“no!response”!
!
If!the!test!URLs!are!not!connecting,!try!resetting!your!modem!and!router!to!see!if!you!can!
reestablish!the!connection.!
!
Once!that!is!done,!you!may!need!to!perform!the!“repair”!function!in!the!CommServer!
setup!or!unplug!and!plug!back!in!the!terminal.!
!
!
One!way!to!test!your!internet:!
!
Make!sure!your!Wi-Fi!is!turned!on!your!phone!and!connected!to!your!network.!
!
Open!up!a!new!window!in!your!browser!and!enter!a!website.!!If!it!does!not!load,!it!is!your!
internet.!
!
**!you!may!need!to!turn!off!your!cellular!internet!connection!to!properly!test!this!because!
some!phones!will!auto!connect!through!that!if!the!Wi-Fi!does!not!work!or!is!slow.!
!
!
!
Autres manuels pour Vx-520 Series APACS 40
25
Autres manuels VeriFone Terminal tactile
VeriFone
VeriFone VX-670 series Manuel utilisateur
VeriFone
VeriFone evolution series Manuel utilisateur
VeriFone
VeriFone V400m Manuel utilisateur
VeriFone
VeriFone Nurit 2085 Manuel utilisateur
VeriFone
VeriFone PINpad 1000SE Manuel utilisateur
VeriFone
VeriFone UX410 Manuel utilisateur
VeriFone
VeriFone HICAPS VX820 Manuel utilisateur
VeriFone
VeriFone IX90 T650p Manuel utilisateur
VeriFone
VeriFone V200c+ Manuel utilisateur
VeriFone
VeriFone VX 675 Manuel utilisateur
VeriFone
VeriFone VX 520 Series Manuel utilisateur
VeriFone
VeriFone P630 Manuel utilisateur
VeriFone
VeriFone Indoor VeriPASS Manuel utilisateur
VeriFone
VeriFone Omni 3600 Manuel utilisateur
VeriFone
VeriFone UX700 ML Manuel utilisateur
VeriFone
VeriFone Tranz 330 Manuel utilisateur
VeriFone
VeriFone VX570 Guide de référence
VeriFone
VeriFone Tranz 330 Manuel utilisateur
VeriFone
VeriFone DUET Vx810 Manuel utilisateur
VeriFone
VeriFone Carbon Mobile 5 Manuel utilisateur
Manuels Terminal tactile populaires d'autres marques
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Manuel utilisateur
Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur
Heisei Electronics
Heisei Electronics Q-POS 815 Manuel utilisateur
Amano
Amano MTX-15 Manuel utilisateur
FLOWBIRD
FLOWBIRD CWT Compact Touch Manuel utilisateur
Demco
Demco SP7 Manuel utilisateur
