Universal Remote Control WR7 Manuel utilisateur
Page | 1
Congratulations!
With your new WR7 universal remote, you
now have the power to control your home
entertainment system with just one easy-to-use
control.
Thousands of audio and video
component codes have already been
programmed into the remote for you, making
it a breeze to set up. Be sure to install the
included batteries first. See page 6 for
instructions.
Quick Set-up
Note: Selecting the proper Component
button is a key to your success. If you have a
combination component that includes a DVD
or Blu-Ray player, use the DVD button regardless
of other functions, so that the DVD transport
controls
will work properly.
Select SAT/CABLE for
your cable box so the Menu, Guide, Info and
Exit buttons work correctly.
Set-up one component at a time, and you’ll
move quickly through your system.
STEP 1: Turn on the component you want to
activate. (Other components can be on or
off, it doesn’t matter.)
STEP 2: Point your new WR7 universal
remote toward the component and press the
appropriately labeled Component button (TV
for TV, DVD for DVD, etc.) While holding
this button down,press the numeric assigned to
your brand in the Quick Set-up Code Table(See
Page 2) and release both Component
button and the number key to save the code.
The component light will blink three times to
confirm that the code has been stored.
STEP 3:
Point the remote control at the component.
STEP 4: Press the power button. If it turns
off, it is programmed for your component. If
it does not turn off, use the Pre-Programmed
3-Digit code Method or Auto-Search
Method.
Check your work before you move to the
next component. Press the POWER [ON]
button to turn the component back on.
Next, test the VOLUME and CHANNEL
buttons (or PLAY and STOP buttons for VCR
and DVD). Repeat Steps 1-4 to activate up
to seven components.
Didn’t work for one of your components?
See other set-up options on page 9.
Page | 2
Quick Number Manufacturer/Brand
0 ROTEL
1 DENON
2 PHILIPS
3 MARANTZ
4 LUXMAN
5 INTEGRA
6 HARMAN KARDON
7 PIONEER
8 BOSE
9 LEXICON
Quick Number Manufacturer/Brand
0 SONY
1 SONY
2 SANYO
3 SONY
4 SONY
5 SONY
6 SONY
7 SONY
8 SONY
9 SONY
Quick Number Manufacturer/Brand
0 MITSUBISHI
1 HUGHES,TIVO
2 PHILIPS
3 JVC
4 SAMSUNG
5 PANASONIC
6 PHILIPS
7 TOSHIBA
8 PIONEER
9LG
Quick Number Manufacturer/Brand
0 IPORT
1 HP,SONY
2 MICROSOFT / XBOX
3 HP,SONY
4 HAUPPAUGE
5 HAUPPAUGE
6 KENSINGTON
7 BOSE
8 SONY / PS2
9DLO
Quick Number Manufacturer/Brand
0 SANYO
1 SONY
2 SAMSUNG
3LG
4 TOSHIBA
5 PANASONIC
6 PHILIPS
7 HITACHI
8 SHARP
9 VIZIO
Quick Number Manufacturer/Brand
0 INSIGNIA
1 PHILIPS
2 HITACHI
3 SAMSUNG
4 PHILIPS MAGNAVOX
5 PANASONIC
6LG
7 JVC
8 DENON
9 PIONEER
Quick Number Manufacturer/Brand
0LG
1 SCIENTIFIC ATLANTA
2 SAMSUNG
3 DIRECTV
4 ECHOSTAR
5 TOSHIBA
6 CABLEVISION
7 SAMSUNG
8GE
9 JERROLD
AUD DVD
CD SAT/CABLE
VCR
AUX
TV
Quick Set-up Code Tables
Page | 3
Keypad Layout and
Button Functions
Allows you to turn the selected
component on and off.
ON
Designed to send Power On/Off
commands for up to seven com-
ponents with one button press.
Designed to send
Power On/Off
commands for
up to seven com-
ponents with one
button press.
SYSTEM OFF
FAVORITE
Used to select the com-
ponent you want to
operate and signals
remote control activity.
Selects highlighted
screen options.
Selects the video
source from avail-
able components.
Returns to the previ-
ously tuned channel
through the SAT/Cable
Set Top Box.
INPUT
Raises or lowers the
sound volume.
VOLUME
Displays the Program
Guide Listings provided
by the Cable or Satellite
Service Provider.
GUIDE
COMPONENT
BUTTONS
PREVIOUS
CHANNEL
Displays the
Applications Menu
through the Cable
Set Top Box.
MENU
Used for program-
ming steps and on-
screen navigation
and highlighting.
CURSOR NAVI-
GATION PAD
Perform standard
VCR and DVD func-
tions when in VCR
and DVD mode, or
VOD (Video-On-
Demand) and DVR
(Digital Video
Recorder) functions
when in Cable mode.
TRANSPORT
CONTROLS
Custom-programmable
Favorite Channel Buttons
MY
FAVORITES
CHANNEL
Silences the Audio.
Press to activate. Press
again to restore sound
to the previous level.
Selects the next
higher or lower
channel.
MUTE
Use to enter code num-
bers for programming
components and to enter
channel numbers to tune
in channels. Also used to
make numeric entries on
on-screen menus. The
alpha labels on the keys refer
to Audio component functions
that can be accessed with the
respective keys.
NUMBER
PAD
Skip forward or
backward a
whole day in the
Program Guide.
SKIP-/+
Displays informa-
tion about the pro-
gram currently play-
ing or highlighted in
the Program Guide
(see GUIDE).
INFO
Exits from current
screen.
EXIT
SELECT
Press to back-light all keypad buttons.
Press again to shut off (or simply wait 10
seconds for automatic shut-off).
LIGHT BUTTON
Page | 4
Table of Contents
Quick Set-up ...................................1
Keypad Layout &
Button Functions ..............................3
Getting Started – Overview
• Battery Installation ........................6
• Activation Overview......................6
• Using Component Buttons ..............7
• Learning Capability.......................7
• Light Button...................................7
• Low Battery Warning ....................7
• Couch Mode ................................7
Get Started with the Basics...................8
• Quick Set-Up................................9
• Three-Digit Set-up..................10-11
• Auto-Search Set-up................12-13
• Set-up Using the
Learning Method ...................14-16
Activating Optional
Advanced Features...................18-19
• MacroPower™ Total System
On/Off......................................20
• “My Favorites” – Favorite
Channels....................................21
• Turning Component buttons into
Macros ......................................22
Activating Punch Throughs
................
23
• SimpleSound™ Total SystemVolume
Control .................................24-25
• Channel Control
Punch Through ...........................26
• Transport Control
Punch Through ...........................27
• OSD (On-Screen Display)
Control Punch Through ..............28
Page | 5
Erasing Commands -
Overview......................................29
• Erasing a Single Learned
Command ..................................30
• Erasing All Learned Commands from
One Component .........................31
• Erasing MacroPower & Other
Macro Commands......................32
• Erasing SimpleSound & Other
“Punch Through” Commands.......33
• Factory Reset..............................34
Finding a Component’s Set-Up
Code Number ................................35
Pre-Programmed
Code Tables ..................................36
• AUDIO .....................................37
• CD............................................38
• VCR/DVR .................................39
• AUX .........................................40
• TV .......................................41-42
• DVD..........................................43
• CABLE/SAT ...............................44
FAQs ............................................45
Warranty ......................................46
Specifications ................................46
Page | 6
Getting Started - Overview
Battery Installation
Press the tab and remove the cover of the
battery compartment located in the back of
your remote. Insert the two AA Alkaline
batteries (included in the package) making
sure to match the positive (+) and negative
(-) symbols as shown in the diagram. Place
the cover back over the battery compartment.
Activation overviewcontrol up
to seven components
Your WR7 Universal remote control is
designed to operate virtually all brands of
AUDIO, TV, DVD, VCR/DVR, CD, SAT/CABLE
and AUX (Light, Music Server, PS2, etc.)
components.
Component Buttons
Be sure to match your component to the
proper Component button on the top of the
remote.
If your component is a combination device
that includes a DVD option, set up the DVD
or AUX button so that the transport controls
will work properly.
The AUX (Auxiliary) button is designed to
operate a 7th audio/video component that
you may have in your system… such as a
TIVO, a second VCR or DVD, or an additional
audio component.
Component Buttons
INSERT BATTERIES
CORRECTLY
TV BUTTON
Page | 7
Using Component Buttons
Once you have activated the WR7 remote
for all of your components, you can simply
press a Component button at the top of the
remote, and the buttons on the WR7 will
work with that component.
Each time you press a button on the remote,
the Component button light will turn on,
indicating which component you are controlling.
Learning Capability
The WR7 has the ability to learn functions
from the original remote controls of other
manufacturers, even if they are not in our
pre-programmed database. See page 14
for instructions.
Light Button
Your WR7 universal remote features a fully
backlit keypad for low light or darkened
conditions. Press the LIGHT button to turn on
the keypad backlight. Press again to turn off
(or simply wait 10 seconds for automatic
shut-off).
LowBattery Warning
When the batteries are low and need to be
replaced, the component light will quickly
blink three times when you press the POWER
[ON] button.
Couch Mode
We’re watching out for your batteries. Your
WR7 remote is designed to automatically
turn itself off if a button is pressed for more
than 30 seconds. This prevents battery power
from being depleted if the remote accidentally
slips between the couch cushions.
We love to help!
PLEASE CONTACT OUR TECHNICAL
SUPPORT CENTER.
E-MAIL: [email protected]
Phone: 1-800-901-0800 (9:00AM - 6:00PM
EST Monday - Friday)
PLEASE DO NOT RETURN
THIS PRODUCT TO THE STORE
Page | 8
Three ways to get started
There are three ways you can activate your
new WR7 universal remote control using its
pre-programmed codes.
1. Quick Set-Up (page 9)
2. Three-Digit Code Set-up (page 10)
3. Auto—Search Set-up (page 12)
Component Buttons
Selecting the proper Component button is a
key to your success. If you have a combination
component that includes a DVD or Blu-Ray player,
use the DVD button regardless of other functions,
so that the DVD transport controls will work properly.
Select SAT/CABLE for your cable box so the Menu,
Guide, Info and Exit buttons work correctly. In
addition to activating the preprogrammed codes,
the WR7 universal remote has the capacity to
learn from your component remote. See instructions
on page 14.
AUX Component Button
While most component buttons are selfexplanatory,
the AUX Component button is designed for
components such as Xbox , PS2 or PC media
centers. Simply set up the [AUX] button in the
same manner as any other component using
Quick Set-Up, the 3- Digit Set-up or Auto-Search
Set-up.
The AUX button can also be used for other
components such as a second TV, DVD, or any
other audio/video component that you may
have in your system. You may need to activate
the key as a Macro if you are connecting a second
DVD or VCR. See page 17 for more information
on automated activity macros.
Page | 9
1. Quick Set-up
Set-up one component at a time, and you’ll
move quickly through your system.
Step 1: Turn on the component you want to
activate. (Other components can be on or
off, it doesn’t matter.)
STEP 2: Point your new WR7 universal
remote toward the component and press the
appropriately labeled Component button (TV
for TV, DVD for DVD, etc.) While holding
this button down,press the numeric assigned to
your brand in the Quick Set-up Code Table(See
Page 2) and release both Component
button and the number key to save the code.
The component light will blink three times to
confirm that the code has been stored.
STEP 3:
Point the remote control at the component.
STEP 4: Press the power button. If it turns
off, it is programmed for your component. If
it does not turn off, use the Pre-Programmed
3-Digit code Method or Auto-Search
Method.
Check your work Press the POWER [ON]
button to turn the component back on.
Next, test the VOLUME and CHANNEL
buttons (or PLAY and STOP buttons for VCR
and DVD) to make sure they all work. Repeat
steps one through four until all your
components are set up properly.
COMPONENT
BUTTONS
NUMBER
PAD
Table des matières
Autres manuels Universal Remote Control Télécommande universelle
Universal Remote Control
Universal Remote Control PHAZR -5 UR5U-9000L Manuel utilisateur
Universal Remote Control
Universal Remote Control Complete Control MRF-260 Manuel utilisateur
Universal Remote Control
Universal Remote Control UR4-DSR Manuel utilisateur
Universal Remote Control
Universal Remote Control Complete Control MX-780 Manuel utilisateur
Universal Remote Control
Universal Remote Control CLIKR-5 UR5U-8700L-IP Manuel utilisateur
Universal Remote Control
Universal Remote Control UR4-DSR Manuel utilisateur
Universal Remote Control
Universal Remote Control UR3-J22TWM Guide de l'administrateur
Universal Remote Control
Universal Remote Control OCE-0085A Manuel utilisateur
Universal Remote Control
Universal Remote Control Complete Control MX-810 Manuel utilisateur
Universal Remote Control
Universal Remote Control UR17E - CODE BOOK Manuel utilisateur
Universal Remote Control
Universal Remote Control 4 Function DTV Remote Control Manuel utilisateur
Universal Remote Control
Universal Remote Control COMPLETE CONTROL MX-450 Manuel utilisateur
Universal Remote Control
Universal Remote Control MRF-260i Manuel utilisateur
Universal Remote Control
Universal Remote Control CABLEVISION OCE-0027A Manuel utilisateur
Universal Remote Control
Universal Remote Control UR-S86TVE Manuel utilisateur
Universal Remote Control
Universal Remote Control CLIKR-5 UR5U-8700L Manuel utilisateur
Universal Remote Control
Universal Remote Control UR4-DSR Manuel utilisateur
Universal Remote Control
Universal Remote Control Easy Clicker OCE-0009D Manuel utilisateur
Universal Remote Control
Universal Remote Control MX-900 Manuel du propriétaire
Universal Remote Control
Universal Remote Control omega MX-650 Manuel utilisateur
Universal Remote Control
Universal Remote Control Customizer URC-300 Manuel utilisateur
Universal Remote Control
Universal Remote Control UR5-8400A Manuel utilisateur
Universal Remote Control
Universal Remote Control POWERBLASTER MRF100B Manuel utilisateur
Universal Remote Control
Universal Remote Control COMPLETE CONTROL MX-880Z Manuel utilisateur
