Universal Remote Control Unifier URC-100 Manuel utilisateur

Owner’s

Manual

Thank You!

Thank you for purchasing the Unifier™

URC-100 Pre-Programmed and Learning Remote

Control. The Quick Setup DVD tutorial supplied

with the Unifier demonstrates the process of

setting up and automating a home entertainment

system. Watch the DVD first to familiarize

yourself with the capabilities of the Unifier and

the process of setup. This manual is designed to

assist you step-by-step as you setup the Unifier

to replace all of your remote controls and

automate your home entertainment system.

The information in this manual is copyright protected. No part of this manual may

be copied or reproduced in any form without prior written consent from Universal

Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE

LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS

MADE IN THIS MANUAL. The information in this manual may be subject to

change without prior notice. Unifier is a registered trademark of Universal Remote

Control, Inc. Power of Simple is a trademark of Universal Remote Control, Inc.

DoubleTap learning is a trademark of Universal Remote Control, Inc. All other

brand or product names are trademarks or registered trademarks of their respective

companies or organizations.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: (914) 835-4484 Fax: (914) 835-4532

Table of Contents

Getting Started.......................................................... 2

Button Layout ........................................................... 3

Basic Operation ........................................................ 4

Basic Setup................................................................ 5

Pre-Programmed Method........................................... 5

Learning Method ....................................................... 8

Volume Control Punch Through ............................. 11

Advanced Setup ..................................................... 13

Own Two VCR’s? Set Aux to be VCR2 ..................... 13

Editing Device Names ............................................. 15

Macro Button Setup................................................. 17

Erasing Settings........................................................ 19

Recalling Pre-Programmed Settings ......................... 22

The Optional Expander ........................................... 23

Pre-Programmed Code Tables ................................. 25

Frequently Asked Questions.................................... 48

Specifications/Warranty.......................................... 50

Getting Started

Congratulations!

You’ve purchased one of the most advanced and easy

to setup remote controls ever made. The Unifier’s

built-in library includes thousands of different brands and

models of remote controls. In most systems, all you have

to do to setup the Unifier is enter which brands and

models you own. If you own a component too new to be

in the library, the Unifier uses advanced DoubleTapTM

learning technology to quickly set each Unifier button,

one at a time. Setting up your Unifier to replace all your

existing remote controls can be done in a few minutes.

Basic Setup is described on pages 5 to 12.

The Unifier’s exciting advanced features automate and

customize operation in many ways. You could use

Macro Setup to power on all of your components and

start the show with the press of one button! With the

Unifier’s unique macro capability you can automate the

most complex home theater system. Any of the names on

the display can be edited as you like. It is best to delay

any Advanced Setup (described on pages 13 to 22) until

after you finish Basic Setup.

Battery Installation

Remove the battery compartment

cover by pressing up the cover

lock. Insert four AAA batteries into

the battery compartment as shown

in the diagram.

The Unifier

Button Layout

URC-100

LIGHT

Button

SHIFT

Button

FUNCTION

Buttons

DISPLAY

DEVICE

Buttons

Selecting a New DEVICE Changes

All Button Commands Instantly

The Unifier can operate eight different devices even

though it is only one remote control. Let’s try it now!

Press the CABLE DEVICE button. The top of the screen

changes to CABLE. Now all of the buttons of the Unifier

operate a Cable box. To operate any of the other devices,

simply press one of the eight device buttons.

The SHIFT Button

Press SHIFT to access a second command for each

button. While the Unifier is in SHIFT mode, the display

will blink. If you don’t press a button within ten

seconds, the Unifier will timeout and return to normal

operation. The orange button labels indicate some of

the commands available when you are in SHIFT mode.

Note: The AUDIO device has unique SHIFT functionality.

It can issue input commands to your A/V Surround Sound

receiver by pressing the DEVICE buttons after SHIFT is selected.

Light Button

Press the LIGHT button to backlight all the buttons. To

turn off the backlighting, press the LIGHT button again,

or just wait ten seconds (the backlighting automatically

shuts itself off).

The Unifier

LIGHT

Button

CABLE

DEVICE

Button

SHIFT

Button

Basic Setup

You can start setting up your Unifier using either the

Pre-Programmed Method or the Learning Method.

However, all the buttons of the Unifier are setup at once

with the Pre-Programmed Method, so it is usually faster

than the one-button-at-a-time Learning Method.

Pre-Programmed Method

Power on the A/V component you wish to setup, so that

you can test codes by sending power off commands.

Refer to the pre-programmed code tables on pages

25 - 46 and write down the code numbers listed

for your A/V component. The code numbers are

listed by categories of devices, then by brand. See

page 25 for a category list.

Press and hold both the SHIFT and ENT (Enter)

buttons for approximately three seconds. The top of

the display will blink “SET” then one of the eight

device names. You are in SETUP mode now.

Note: You have 30 seconds to perform a step while you are

in SETUP mode. If you don’t press a button within that time,

the Unifier will time out and return to normal operation.

URC-100

SHIFT

Button ENT

Button

The Unifier

Choose the name of the device you’d like to

setup. Use the cursor LEFT or RIGHT buttons to

change the flashing name.

For Example: I wanted to setup the TV Device button

first, so I pressed the cursor LEFT or RIGHT until “TV”

was flashing on the display.

Point the Unifier at the component, then enter the

first three digit code number from your notes using

the numbered buttons. After you enter each three

digit code number, look at the component to see if

it turned off.

Continue to enter code numbers until the

component powers off.

For Example: I have a Sony TV. I found the code

numbers 070, 139,147, 126, 185, 194 and 085 under

Sony in the TV TABLE. Using the numbered buttons on

the Unifier, I entered 070 and looked at the TV. It

didn’t turn off, so I entered 139, then 147 and so on,

until I found the code that powered off the TV.

LEFT RIGHT

Using the

numbered

buttons,

enter the

3 digit code

number.

URC-100

Note: If your component fails to turn off after you have

entered all the code numbers listed for your brand, you can

scan through the other brands in the table by alternately pressing

the Channel Up(or Down) and Power Off buttons (there is a

chance that your component was actually manufactured by

another brand). However, most of the code tables are so

large that it is usually faster to use the Learning Method on Page 8.

When the component turns off, save the code

number you entered by pressing the LIGHT button.

The Unifier responds by flashing SAVED on the

display twice, then returns to normal operating

mode.

When the display shows a device name, you are

back in normal operating mode. Now it’s time to

test all the buttons. If some buttons don’t work, try

repeating steps 1-6 with the remaining code

numbers, to see if you can improve the match to

your component.

For Example: My Sony TV powered off with TV code

number 147. However the number buttons didn’t work

when I tested them. So, I repeated steps one to six, using

other code numbers and eventually discovered that when

code number 185 is set, all the buttons work perfectly.

Repeat steps one through seven for each of your

devices. In most systems, you can finish basic

setup in just a few minutes and put all your old

remote controls away.

Channel Up

and Down

scan code

numbers.

LIGHT

Button

The Unifier

Learning Method

The Unifier can learn commands from your old remote

controls one-button-at-a-time by following these simple

steps:

Line-up the Unifier with your old remote control,

head-to-head, one or two inches apart.

Press and hold both the desired DEVICE button

and the SELECT button for approximately three

seconds. The top of the display will show

“LEARN”. You are in LEARN mode now.

Note: You have 30 seconds to perform a step while you are

in LEARN mode. If you don’t press a button within that time,

the Unifier will time out and return to normal operation.

SELECT

Button

DEVICE

Buttons

Table des matières

Autres manuels Universal Remote Control Télécommande universelle

Universal Remote Control

Universal Remote Control UR-S86TVE Manuel utilisateur

Universal Remote Control

Universal Remote Control ORION MX-850 Manuel utilisateur

Universal Remote Control

Universal Remote Control Customizer URC-300 Manuel utilisateur

Universal Remote Control

Universal Remote Control 4 Function DTV Remote Control Manuel utilisateur

Universal Remote Control

Universal Remote Control UR4-DSR Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8700L Manuel utilisateur

Universal Remote Control

Universal Remote Control URC-L-1870 Manuel utilisateur

Universal Remote Control

Universal Remote Control UR5-8400A Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Manuel utilisateur

Universal Remote Control

Universal Remote Control Total Control TRC-1280 Manuel utilisateur

Universal Remote Control

Universal Remote Control Osiris MX-3500 Manuel utilisateur

Universal Remote Control

Universal Remote Control POWERBLASTER MRF100B Manuel utilisateur

Universal Remote Control

Universal Remote Control UR2-DTA Manuel utilisateur

Universal Remote Control

Universal Remote Control Universl Remote Manuel utilisateur

Universal Remote Control

Universal Remote Control total control TRC-780 Manuel utilisateur

Universal Remote Control

Universal Remote Control Complete Control MX-880 Manuel utilisateur

Universal Remote Control

Universal Remote Control AVEX R6 - SPECS SHEET Manuel utilisateur

Universal Remote Control

Universal Remote Control Atlas M1055 Manuel utilisateur

Universal Remote Control

Universal Remote Control OCE-0085A Manuel utilisateur

Universal Remote Control

Universal Remote Control Easy Clicker UR3-SR3 Manuel utilisateur

Universal Remote Control

Universal Remote Control COMPLETE CONTROL MX-880Z Manuel utilisateur

Universal Remote Control

Universal Remote Control COMPLETE CONTROL MX-450 Manuel utilisateur

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-6200L Manuel utilisateur

Manuels Télécommande universelle populaires d'autres marques

Pronto

Pronto Peel Manuel utilisateur

GE 24929 Manuel utilisateur

Radio Shack

Radio Shack Wireless Remote Control System Manuel utilisateur

AUVIO

AUVIO Universal Home Theater Remote Manuel utilisateur

Philips

Philips Icon SRU4106 Manuel utilisateur

THOMSON

THOMSON ROC4309 Manuel utilisateur

Philips

Philips pm625S Manuel utilisateur

GE RM94931 Manuel utilisateur

RCA

RCA RCU600WMS - Universal Remote Control Manuel utilisateur

Blackweb

Blackweb BWB17AV002 Manuel utilisateur

Marmitek

Marmitek DoorGuard 300 Manuel utilisateur

Chunghop

Chunghop RM-L618 Manuel utilisateur

GE RM24965 Manuel utilisateur

Anderic

Anderic KTN828 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manuel utilisateur

Medion

Medion E74023 Manuel utilisateur

intensity

intensity RM02A Manuel utilisateur

GE RM24950 Manuel utilisateur