Unitronics Vision OPLC V130 Manuel utilisateur

Autres manuels pour Vision OPLC V130

1

Table des matières

Autres manuels Unitronics Contrôleurs

Unitronics

Unitronics Vision700 Manuel utilisateur

Unitronics

Unitronics Vision OPLC V350-35-TA24 Manuel utilisateur

Unitronics

Unitronics US5-B10-RA28 Manuel utilisateur

Unitronics

Unitronics Vision OPLC V130-J-TR20 Manuel utilisateur

Unitronics

Unitronics Vision V570-57-T40B Manuel utilisateur

Unitronics

Unitronics V120-22-R34 Manuel utilisateur

Unitronics

Unitronics Jazz JZ10-11-R16L Manuel utilisateur

Unitronics

Unitronics Vision OPLC V1040-T20B Manuel utilisateur

Unitronics

Unitronics Jazz OPLC JZ20-T40 Manuel utilisateur

Unitronics

Unitronics UniStream USC-B5-TA32 Manuel utilisateur

Unitronics

Unitronics Uni-COM UAC-CB-01RS2 Manuel utilisateur

Unitronics

Unitronics Vision V120 Manuel utilisateur

Unitronics

Unitronics V280 Manuel utilisateur

Unitronics

Unitronics UniStream USC-B5-B1 Manuel utilisateur

Unitronics

Unitronics UniStream USC-B10-RA28 Manuel utilisateur

Unitronics

Unitronics Vision OPLC V130-33-T38 Manuel utilisateur

Unitronics

Unitronics Vision OPLC V570-57-T34 Manuel utilisateur

Unitronics

Unitronics Vision V130-33-R34 Manuel utilisateur

Unitronics

Unitronics Vision V130-J-TA24 Manuel utilisateur

Unitronics

Unitronics Vision V350-35-TU24 Manuel utilisateur

Unitronics

Unitronics MJ20-MEM1 Manuel utilisateur

Unitronics

Unitronics UniStream Built-in Series Manuel utilisateur

Unitronics

Unitronics UniStream PLC Series Manuel utilisateur

Unitronics

Unitronics Samba SM70-J-RA22 Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur

Headquarters

Unitronics (1989) (R"G) Ltd.

Unitronics Building, Airport City

P.O.B. 300, Ben Gurion Airport, Israel 70100

Tel: + 972 (3) 977 8888 Fax: + 972 (3) 977 8877

From: Barak Illouz e-mail: Page:1Of:2Size: 141312 eSignature:1303-279-21(BI) Date Created: 1-Oct-09

File Name: Z:\HW\Doc\Mechanic\Replacing guide\Replacing a V130 Display.doc Date Printed: 1-Oct-09

Replacing a V130 Display

Before performing these actions, touch a grounded object to discharge

any electrostatic charge.

Avoid touching the PCB board directly. Hold the PCB board by its connectors.

Opening the Controller

1. Turn off the power supply, disconnect, and dismount the controller.

2. The back cover of the controller comprises 4 screws, located in the corners.

Remove the screws, and pull off the back cover.

3.

Hold the I/O PCB board by its top and bottom connectors and steadily pull

the board off.

4. Remove the plastic tabs marked X and Y.

5. Remove the keypad ribbon cable shown in the next figure.

Press the sides of the cable connector and pull it slightly upwards; this releases the cable.

Pull the cable from the connector.

Headquarters

Unitronics (1989) (R"G) Ltd.

Unitronics Building, Airport City

P.O.B. 300, Ben Gurion Airport, Israel 70100

Tel: + 972 (3) 977 8888 Fax: + 972 (3) 977 8877

From: Barak Illouz e-mail: Page:2Of:2Size: 141312 eSignature:1303-279-21(BI) Date Created: 1-Oct-09

File Name: Z:\HW\Doc\Mechanic\Replacing guide\Replacing a V130 Display.doc Date Printed: 1-Oct-09

6. Locate the two screws that fasten the CPU board to the controller and remove them.

7.

Hold the main board by Port 1 and by the I/O expansion port, and pull it out of

8. Locate the two screws that fasten the LCD display to the plastic panel and remove them.

9. Remove the LCD display.

Closing the Controller

1. Replace the new LCD display in the correct location, including the fastening screws.

2. Replace the CPU board, including the fastening screws.

3. Replace Keypad ribbon cable, and verify if the cable connectors are locked.

4. Replace the plastic tabs marked X and Y in the correct location.

5. Replace the I/O board.

6. Close the controller by snapping the plastic cover back in its place. If the card is

placed correctly, the cover will snap on easily.

7. Replace the screws in the corners of the back cover.