Ubiquiti NanoStationM Series Manuel utilisateur

NanoStation M2/M3/M365/M5 Zip Tie PoE (24V, 0.5A) with Mounting

Bracket

Power Cord

NanoStationloco M2/M5 Zip Tie PoE (24V, 0.5A) with Mounting

Bracket

Package Contents

NSM2/NSM3/NSM365/NSM5

locoM2/locoM5

NanoStationM/locoM Series Quick Start Guide

Power Cord

NanoStationlocoM9 Zip Tie PoE (24V, 0.5A) with Mounting

Bracket

Power Cord

locoM9

Installation Requirements

Shielded Category 5 (or above) cabling with drain wire should be used for all wired

Ethernet connections and should be grounded through the AC ground of the PoE.

We recommend that you protect your networks from harmful outdoor

environments and destructive ESD events with industrial-grade, shielded Ethernet

cable from Ubiquiti. For more details, visit ui.com/toughcable

Surge protection should be used for all outdoor installations. We recommend that

you use two Ethernet Surge Protectors, model ETH-SP, one near the NanoStation

and the other at the entry point to the building. The ETH-SP will absorb power

surges and safely discharge them into the ground.

NanoStationM/locoM Series Quick Start Guide

Hardware Overview

NSM2/NSM3/NSM365/NSM5/locoM2/locoM5

NanoStationM/locoM Series Quick Start Guide

Power LED

The LED will light green when the device is connected to a power source.

NanoStationM/locoM Series Quick Start Guide

LAN1 LED

LAN2 LED

Signal LEDs

Secondary Port

Main/LAN* Port

Reset Button

The LED will light steady green when an active Ethernet connection is made to

the Main/LAN port and ﬂash when there is activity.

(NanoStation M2/M3/M5 only) The LED will light steady green when an active

Ethernet connection is made to the Secondary port and ﬂash when there is

activity.

In airOS®, you can modify the threshold values for the wireless signal strength

LEDs on the Advanced tab under Signal LED Thresholds. The default values are

shown below:

(NanoStationM2/M3/M5 only) This 10/100 Ethernet port is used for bridging and

supports software-conﬁgurable PoE passthrough.

Note: To use PoE passthrough on the Secondary port, a 24V, 1A PoE

adapter is required.

This 10/100 Ethernet port is used to connect the power and should be

connected to the LAN and DHCP server.

To reset to factory defaults, press and hold the Reset button for more than 10

seconds while the device is powered on. Alternatively, the device may be reset

remotely via a Reset button located on the bottom of the PoE adapter.

* The Main port is labeled LAN on the NanoStationlocoM2/M5.

locoM9

NanoStationM/locoM Series Quick Start Guide

Power LED

LAN1 LED

Signal LEDs

The LED will light green when the device is connected to a power source.

The LED will light steady green when an active Ethernet connection is made to

the Main/LAN port and ﬂash when there is activity.

In airOS®, you can modify the threshold values for the wireless signal strength

LEDs on the Advanced tab under Signal LED Thresholds. The default values are

shown below:

NanoStationM/locoM Series Quick Start Guide

RP-SMA Antenna Connector

Main/LAN Port

Reset Button

Reserved for future use.

This 10/100 Ethernet port is used to connect the power and should be

connected to the LAN and DHCP server.

To reset to factory defaults, press and hold the Reset button for more than 10

seconds while the device is powered on. Alternatively, the device may be reset

remotely via a Reset button located on the bottom of the PoE adapter.

Installation

1.

2.

NanoStationM/locoM Series Quick Start Guide

3.

4.

NanoStationM/locoM Series Quick Start Guide

5.

NanoStationM/locoM Series Quick Start Guide

6.

NanoStationM/locoM Series Quick Start Guide

Autres manuels pour NanoStationM Series

2

Ce manuel convient aux modèles suivants

8

Table des matières

Autres manuels Ubiquiti Point d'accès sans fil

Ubiquiti

Ubiquiti UniFi XG Instructions d'utilisation et d'entretien

Ubiquiti

Ubiquiti UniFi AC Mesh Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Ubiquiti

Ubiquiti PowerBeam AC PBE-5AC-620 Manuel utilisateur

Ubiquiti

Ubiquiti PowerBeam AC GENZ Manuel utilisateur

Ubiquiti

Ubiquiti BulletAC-IP67 Manuel utilisateur

Ubiquiti

Ubiquiti QCA9994 Guide d'application

Ubiquiti

Ubiquiti Rocket M Series Manuel utilisateur

Ubiquiti

Ubiquiti UniFi AP AC Lite Manuel utilisateur

Ubiquiti

Ubiquiti IS-5AC Manuel utilisateur

Ubiquiti

Ubiquiti LiteBeam LBE-5AC-16-120 Manuel utilisateur

Ubiquiti

Ubiquiti RocketM Manuel utilisateur

Ubiquiti

Ubiquiti NanoBridge M5 Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation M2 Manuel utilisateur

Ubiquiti

Ubiquiti Rocket M2 Titanium RM2-Ti Manuel utilisateur

Ubiquiti

Ubiquiti UniFi UAP-IW-HD Manuel utilisateur

Ubiquiti

Ubiquiti UniFi Manuel utilisateur

Ubiquiti

Ubiquiti LTU-Lite Manuel utilisateur

Ubiquiti

Ubiquiti PBE-M5-300-US Manuel utilisateur

Ubiquiti

Ubiquiti Loco5AC Manuel utilisateur

Ubiquiti

Ubiquiti PBE-5AC-400-ISO-EU Manuel utilisateur

Ubiquiti

Ubiquiti NBE-5AC-Gen2 Manuel utilisateur

Ubiquiti

Ubiquiti Rocket2AC Prism Manuel utilisateur

Ubiquiti

Ubiquiti PrismStation 5AC Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur

EnGenius

EnGenius EAP350 Manuel utilisateur