Ubiquiti GigaBeam GBE Manuel utilisateur

60 GHz/5 GHz Radio System

with 1Gbps+ Throughput

Model: GBE

Package Contents

GBE Ball Joint

Mount

Lock Ring

Metal Strap Gigabit PoE (24V, 0.5A)

with Mounting Bracket

Power Cord

Installation Requirements

• Pole-mounting: 7 mm socket wrench or screwdriver

• Wall-mounting: wall fastener (not included)

• Shielded Category 5 (or above) cabling with drain wire

should be used for all wired Ethernet connections and

should be grounded through the AC ground of the PoE.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial-grade, shielded Ethernet cable from Ubiquiti.

For more details, visit ui.com/toughcable

• Surge protection should be used for all outdoor installations.

We recommend that you use two Ethernet Surge Protectors,

model ETH-SP-G2, one near the device and the other at

the entry point to the building. The ETH-SP-G2 will absorb

power surges and safely discharge them into the ground.

LAN

ETH-SP-G2

ETH-SP-G2

ES-8-150W

GBE

Hardware Overview

1Reset Button

To reset to factory defaults, press and hold the Reset button for more

than 10 seconds while the device is poweredon. Alternatively, the

device may be reset remotely via a Reset button located on the bottom

of the Gigabit PoE Adapter.

2Ethernet Port

This Gigabit Ethernet port is used to connect the power and should be

connected to the LAN and DHCP server.

LEDs

3

4 6

57

3

GPS

Lights steady blue when there is a strong GPS signal. .

460 GHz

Lights steady blue when 60 GHz link is ready.

55 GHz

Lights steady blue when the 5 GHz link is ready.

6

LAN

The LED will light steady blue when an active Ethernet connection is

made to the Ethernet port and ash when there is activity.

7

Power/Status

Color Status

Flashing White Bootup is in progress.

White Ready for use; UNMS is disabled.

Blue Ready for use; UNMS is enabled and connected.

Steady Blue with

Occasional Flashing

Ready for use; UNMS is enabled but not

connected.

Quickly Flashing Blue Used to locate device from UNMS or web.

Alternating

Blue/White Firmware upgrade is in progress.

Hardware Installation

Go to the appropriate mounting instructions: Pole Mounting

or “Wall Mounting”.

Pole-Mounting

1.

2.

3.

4.

Wall Mounting

The device must be mounted directly to a wood stud or other

structurally stable surface to avoid damage to the mounting

hole when you adjust the aim.

Optional Accessory

To enhance stability, you can use the NanoBeam® Wall Mount

Kit, model NBE-WMK (soldseparately).

Note: Center screw included. Two optional screws (not

included) provide additional stability.

Installation Instructions

1.

2.

3.

OR

Fastener (not included) NanoBeam Wall Mount Kit

4.

Aiming

1.

2.

Table des matières

Autres manuels Ubiquiti Point d'accès sans fil

Ubiquiti

Ubiquiti NanoStation loco Manuel utilisateur

Ubiquiti

Ubiquiti UAP-PRO Manuel utilisateur

Ubiquiti

Ubiquiti Rocket R5ACL Manuel utilisateur

Ubiquiti

Ubiquiti Loco5AC-US Manuel utilisateur

Ubiquiti

Ubiquiti IsoStation AC IS-5AC Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation M2 Manuel utilisateur

Ubiquiti

Ubiquiti Rocket R5AC-Lite Manuel utilisateur

Ubiquiti

Ubiquiti NanoBeam M5-16 Manuel utilisateur

Ubiquiti

Ubiquiti R5AC-PTP Manuel utilisateur

Ubiquiti

Ubiquiti AMPLIFI Manuel utilisateur

Ubiquiti

Ubiquiti Loco5AC Manuel utilisateur

Ubiquiti

Ubiquiti LiteAP ac LAP-120 Manuel utilisateur

Ubiquiti

Ubiquiti UniFi AP AC Lite Manuel utilisateur

Ubiquiti

Ubiquiti Rocket 5AC PTP Manuel utilisateur

Ubiquiti

Ubiquiti Rocket Prism AC GEN 2 RP-5AC-Gen2 Manuel utilisateur

Ubiquiti

Ubiquiti UnFi UAP-AC-LITE Manuel utilisateur

Ubiquiti

Ubiquiti LiteBeam LBE5AC120-U Manuel utilisateur

Ubiquiti

Ubiquiti Loco5AC Manuel utilisateur

Ubiquiti

Ubiquiti U-Installer Manuel utilisateur

Ubiquiti

Ubiquiti AF-2X Manuel utilisateur

Ubiquiti

Ubiquiti GigaBeam Manuel utilisateur

Ubiquiti

Ubiquiti RP-5AC-Gen2 Manuel utilisateur

Ubiquiti

Ubiquiti NanoStatonM Series Manuel utilisateur

Ubiquiti

Ubiquiti NanoStatonM Series Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur

EnGenius

EnGenius EAP350 Manuel utilisateur