Ubiquiti AG-PRO-INS Manuel utilisateur

Model: AG-PRO-INS

Quick Start Guide

Hardware Overview

POE IN

Port

Micro-USB

Port

LED

Top View

POE OUT

Port

Removable

Rubber

Casing

LAN

Port

LED

Steady White Powered and initializing.

Steady Blue Working properly and

actively connected.

Alternating Blue/White Device is busy;

do not power off or unplug.

Ports

POE OUT Supports power and data.

Connect this port to the airMAX® device.

POE IN Supports power only. Connect

this port to the PoE adapter or switch.

LAN (Optional) Ethernet connection to

a host computer.

Micro-USB (Optional) Power input from

a mobile power pack.

Reset Buttons

Reset

Ext

Bottom View with Casing Removed

Reset To reset the airGateway™to

factory defaults, press and hold the

Reset button while the airGateway is

powered on. Hold the button until the

LED alternates blue and white.

Reset Ext To reset the airMAX device

connected to the airGateway to factory

defaults, press the Reset Ext button while

the airMAX device is powered on. Hold

the button for more than 8 seconds until

the LEDs on the device flash.

Configure the airGateway

1. Connect an Ethernet cable to the port

labeled POE IN.

2. Connect the other end of the cable to

a 24V passive PoE adapter or switch.

3. From a mobile device or computer,

connect its Wi-Fi to the airGateway

access point (SSID) named:

airGateway:<MAC Address>

Note: Ensure that DHCP is

enabled on your Wi-Fi adapter.

4. Launch a web browser and go to:

https://192.168.1.1

5. The airOS® login screen will appear.

Enter ubnt in the Username and

Password fields.

Upon initial login you must select

your Country and Language, and

agree to the Terms of Use to use the

product. Click Login.

Note: U.S. product versions are

locked to the U.S. Country Code

to ensure compliance with FCC

regulations.

6. Go to the System page and under

System Accounts, click the key icon

to change the default administrator

username and password.

Click Change, and then click Apply to

save the changes.

Note: The airGateway LED will

turn white to indicate that your

changes are being saved.

7. After your changes have been

saved and the LED is steady blue,

disconnect the Ethernet cable from

the airGateway.

The airGateway is now configured and

ready for use.

Configure an airMAX Device

Use a mobile device or laptop to

configure the airMAX device at the point

of installation via the airGateway’s Wi-Fi:

1. Power the airGateway by using a

24V passive PoE adapter or a mobile

battery pack:

• PoE adapter Connect an Ethernet

cable from a 24V passive PoE

adapter to the port labeled POE IN

on the airGateway.

• Mobile battery pack Connect a

mobile power pack to the Micro-USB

port on the airGateway.

2. Connect an Ethernet cable to the port

labeled POE OUT on the airGateway.

Table des matières

Autres manuels Ubiquiti Point d'accès sans fil

Ubiquiti

Ubiquiti UniFi AP AC Outdoor Manuel utilisateur

Ubiquiti

Ubiquiti UniFi AC SHD Manuel utilisateur

Ubiquiti

Ubiquiti PowerBeam AC GENZ Manuel utilisateur

Ubiquiti

Ubiquiti NanoBeam M2 Manuel utilisateur

Ubiquiti

Ubiquiti Rocket R5AC-Lite Manuel utilisateur

Ubiquiti

Ubiquiti UniFi UAP-AC-LR Manuel utilisateur

Ubiquiti

Ubiquiti NanoStationM Series Manuel utilisateur

Ubiquiti

Ubiquiti GigaBeam Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation5 Manuel utilisateur

Ubiquiti

Ubiquiti IsoStation AC IS-5AC Manuel utilisateur

Ubiquiti

Ubiquiti U-LTE Manuel utilisateur

Ubiquiti

Ubiquiti PowerBeam PBE2ACN Manuel utilisateur

Ubiquiti

Ubiquiti BulletAC-IP67 Manuel utilisateur

Ubiquiti

Ubiquiti Rocket M3 Manuel utilisateur

Ubiquiti

Ubiquiti UAP Manuel utilisateur

Ubiquiti

Ubiquiti Edge Point EP-R8 Manuel utilisateur

Ubiquiti

Ubiquiti UAP-AC-M Manuel utilisateur

Ubiquiti

Ubiquiti UniFi Manuel utilisateur

Ubiquiti

Ubiquiti NBE--2AC--13 Manuel utilisateur

Ubiquiti

Ubiquiti UniFi Manuel utilisateur

Ubiquiti

Ubiquiti UniFi Switch Flex Mini Manuel utilisateur

Ubiquiti

Ubiquiti RocketM Series Manuel utilisateur

Ubiquiti

Ubiquiti Bullet Manuel utilisateur

Ubiquiti

Ubiquiti ER-8-XG Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur

EnGenius

EnGenius EAP350 Manuel utilisateur