Ubiquiti UniFi US-48-500W Manuel utilisateur
UniFi Switch Power Cord Mounting Screws (Qty. 4)
Cage Nuts (Qty. 4)
Package Contents
Installation Requirements
Phillips screwdriver
Standard-sized, 19" wide rack with a minimum of 1U height available
For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.
For outdoor applications, shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections and should be grounded through the AC ground of the power
supply.
We recommend that you protect your networks from harmful outdoor environments and
destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For
more details, visit:
ui.com/toughcable
Note:
Although the cabling can be located outdoors, the UniFi Switch itself should be
housed inside a protective enclosure.
IMPORTANT:
We strongly recommend using UPS backup and power regulation to
prevent equipment damage due to stability issues with local AC power.
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.6 (1.8 or newer recommended)
US-48-500W, US-48-750W Quick Start Guide
System LED
RJ45 PoE LED (Ports 1 - 48)
RJ45 Speed/Link/Act LED (Ports 1 - 48)
SFP+ Speed/Link/Act LED (Ports 1 - 2)
SFP Speed/Link/Act LED (Ports 1 - 2)
Web Browser: Mozilla Firefox, Google Chrome, Microsoft Edge, or Microsoft Internet
Explorer 11
UniFi Controller v5.4.x or higher
Hardware Overview
Click here
for detailed descriptions.
Off No PoE
Amber IEEE 802.3af/802.3at
Green 24V Passive PoE
Off No Link
Amber Link Established at 10/100 Mbps
Flashing Indicates Activity
Green Link Established at 1000 Mbps
Flashing Indicates Activity
Off No Link
Green Link Established at 1 Gbps
Flashing Indicates Activity
White Link Established at 10 Gbps
Flashing Indicates Activity
Off No Link
US-48-500W, US-48-750W Quick Start Guide
RJ45 (Ports 1 - 48)
SFP+ (Ports 1 - 2)
SFP (Ports 1 - 2)
Reset Button
Console Port
Power Port
Green Link Established at 1 Gbps
Flashing Indicates Activity
RJ45 ports support Power over Ethernet (PoE) and 10/100/1000 Ethernet connections.
Hot-swappable SFP+ ports support 1/10 Gbps connections.
Hot-swappable SFP ports support 1 Gbps connections.
This button serves two functions for the UniFi Switch:
Restart
Press and release the Reset button quickly.
Restore to Factory Default Settings
Press and hold the Reset button for more than ve
seconds.
RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-
DB9, serial console cable, also known as a rollover cable, to connect the Console port to
your computer. Then congure the following settings as needed:
Baud rate 115200
Data bits 8
Parity NONE
Stop bits 1
Flow control NONE
Connect the included Power Cord to the Power port.
Hardware Installation
1.
US-48-500W, US-48-750W Quick Start Guide
2.
OR
US-48-500W, US-48-750W Quick Start Guide
3.
US-48-500W, US-48-750W Quick Start Guide
Connecting Ethernet
Using SFP+ and SFP Ports
Ports SFP+ Module Type SFP Module Type
SFP+ 1-2 10 Gbps 1 Gbps
SFP 1-2 (Not supported) 1 Gbps
1.
2.
US-48-500W, US-48-750W Quick Start Guide
3.
For information about compatible ber SFP modules, visit: community.ubnt.com/uni
Software Installation
Download and install the latest version of the UniFi Controller software at
ui.com/download/uni
and follow the on-screen instructions.
Note:
If you already have UniFi Controller v5.4.x or higher installed, go to the section,
Adopting the UniFi Switch.
After you have installed the software and run the UniFi Installation Wizard, a login screen will
appear for the UniFi Controller management interface. Enter the username and password
that you created and click Sign In.
US-48-500W, US-48-750W Quick Start Guide
You can manage your network and view network statistics using the UniFi Controller
management interface.
To adopt the UniFi Switch, proceed to the section, Adopting the UniFi Switch.
For information on conguring and using the UniFi Controller software, refer to the User
Guide on the website:
ui.com/download/uni
Adopting the UniFi Switch
1. From the UniFi Controller dashboard, click Devices in the left menu bar.
2. Locate the UniFi Switch in the list of devices under the Model column. Click Adopt.
US-48-500W, US-48-750W Quick Start Guide
3. The System LED on the UniFi Switch will turn blue to conrm that it has been successfully
adopted.
Conguring PoE Settings
1. On the Devices screen, locate the UniFi Switch. Click the switch to access its settings.
2. Click the Ports tab.
US-48-500W, US-48-750W Quick Start Guide
3. Click Actions for the port you want to congure.
4. Select the appropriate PoE setting: Off, 24V Passive, or PoE+. Then click Apply.
US-48-500W, US-48-750W Quick Start Guide
Autres manuels pour UniFi US-48-500W
3
Ce manuel convient aux modèles suivants
1
Autres manuels Ubiquiti Changer
Ubiquiti
Ubiquiti EdgeSwitch 10 XP Manuel utilisateur
Ubiquiti
Ubiquiti ES-24-250W Manuel utilisateur
Ubiquiti
Ubiquiti USW--Pro--48 Manuel utilisateur
Ubiquiti
Ubiquiti UniFi USW-16-POE Manuel utilisateur
Ubiquiti
Ubiquiti EdgePoint S16 Manuel utilisateur
Ubiquiti
Ubiquiti UniFi USW-24-POE Manuel utilisateur
Ubiquiti
Ubiquiti ES-10X Manuel utilisateur
Ubiquiti
Ubiquiti UniFi USW-Pro-24-POE Manuel utilisateur
Ubiquiti
Ubiquiti UniFi USW-Pro-48-POE Manuel utilisateur
Ubiquiti
Ubiquiti EdgeSwitch ES-10XP Mode d’emploi
Ubiquiti
Ubiquiti ES-24-250W Mode d’emploi
Ubiquiti
Ubiquiti UniFi USW-Pro-24-POE Manuel utilisateur
Ubiquiti
Ubiquiti TS-16-CARRIER Manuel utilisateur
Ubiquiti
Ubiquiti USW-Industrial Manuel utilisateur
Ubiquiti
Ubiquiti UA-Hub Manuel utilisateur
Ubiquiti
Ubiquiti EdgeSwitch 48 LITE Manuel utilisateur
Ubiquiti
Ubiquiti EdgeSwitch ES-16-XG Manuel utilisateur
Ubiquiti
Ubiquiti UniFi USW-Pro-24-POE Manuel utilisateur
Ubiquiti
Ubiquiti ES-24-250W Manuel utilisateur
Ubiquiti
Ubiquiti NanoSwitch N-SW Manuel utilisateur
