Ubiquiti ERLite-3 Manuel utilisateur

EdgeRouter Lite

3-Port Router

Model: ERLite-3

Introduction

Thank you for purchasing the Ubiquiti Networks EdgeRouterLite,

model ERLite-3. It is part of the EdgeRouter series. For more

information, visit www.ubnt.com.

This Quick Start Guide is designed to guide you through the

installation of the EdgeRouter Lite and show you how to access

the EdgeOS Configuration Interface.

Package Contents

EdgeRouter Lite Power Adapter

(12V, 1A)

Power Cord

M2.9x20 Screws

(Qty. 2)

M2.9 Anchors

(Qty. 2)

EdgeRouter Lite Quick Start Guide

Hardware Overview

Back Panel

12V DC

GROUND

Power

Grounding Hole with

Grounding Screw

Ventilation Holes

Front Panel Ports

CONSOLE 0 1 2

SPEED

Console ResetEthernet (0-2)

Interface Description

Console RJ45 serial console port for Command Line Interface

(CLI) management.

Ethernet (0-2) 10/100/1000 Mbps Ethernet ports.

Reset

To reset to factory defaults, disconnect the Power

Adapter from the Power port. Press and hold the

Reset button while connecting the Power Adapter

to the Power port. Keep holding the button until the

right LED on port 2 starts flashing and then stops

after a few seconds.

Hardware Overview

Front Panel LEDs

The LEDs on the left side of each port are not used at this time.

Below is a description of the right LED functionality:

CONSOLE 0 1 2

SPEED

Power Speed/Link/Act

10/100 Mbps

Speed/Link/Act

1000 Mbps

LED State Status

Console

Power

Off EdgeRouter Lite not powered on.

Green EdgeRouter Lite is powered on.

Ethernet (0-2)

Speed/

Link/Act

Off No Link

Amber Link Established at 10/100 Mbps

Amber Flashing Link Activity at 10/100 Mbps

Green Link Established at 1000 Mbps

Green Flashing Link Activity at 1000 Mbps

EdgeRouter Lite Quick Start Guide

Hardware Installation

Mount the EdgeRouter Lite on a wall or place it on a bench top.

Note: Keep 20 mm of clearance next to the ventilation

holes for adequate airflow.

Cabling Requirements

• For indoor applications, use Category 5 (or above) UTP cabling

approved for indoor use.

• For outdoor applications, shielded Category 5 (or above) cabling

should be used for all wired Ethernet connections and should

be grounded through the AC ground of the power supply.

We recommend that you protect your outdoor networks from

the most brutal environments and devastating ESD attacks

with industrial-grade shielded Ethernet cable from Ubiquiti

Networks™. For more details, visit www.ubnt.com/toughcable

Note: Although the cabling can be located outdoors,

the EdgeRouter Lite itself should be housed inside a

protective enclosure.

Wall-Mounting

To mount the EdgeRouter Lite on a wall, you will need a drill, a

6mm drill bit, and a Phillips screwdriver.

1. Use a 6 mm drill bit to drill two holes 100 mm apart. (You can

use the template on page 16 to mark the holes.)

2. Insert the M2.9 Anchors into the holes. Use a Phillips screwdriver

to secure a M2.9x20 Screw to each anchor. Leave a clearance of

approximately 3 mm between each screw head and its anchor.

3 mm

Note: You can also mount the EdgeRouter

Lite in a vertical orientation.

Hardware Installation

3. Position the EdgeRouter Lite with the Ethernet ports facing

down. Place the Wall-Mount Slots of the EdgeRouter Lite over

the screw heads on the wall. Then slide the EdgeRouter Lite

down to lock it into place.

12V DC

GROUND

Grounding the EdgeRouter Lite (Optional)

The EdgeRouter Lite is grounded through the Power Adapter;

however, you can add optional ESD grounding for enhanced ESD

protection.

1. Loosen the Grounding Screw to secure a ground wire (not

included) to the Grounding Hole.

12V DC

GROUND

2. Secure the other end of the ground wire to a grounding block.

EdgeRouter Lite Quick Start Guide

Connecting Power

1. Connect the Power Adapter to the Power port.

12V DC

GROUND

2. Connect the Power Cord to the Power Adapter. Connect the

other end of the Power Cord to a poweroutlet.

Hardware Installation

Accessing the EdgeOS Configuration Interface

1. Connect an Ethernet cable from the Ethernet port of your

computer to the port labeled 0 on the EdgeRouter Lite.

2. Configure the Ethernet adapter on your host system with a

static IP address on the 192.168.1.x subnet (e.g., 192.168.1.100).

3. Launch your web browser. Type https://192.168.1.1 in the

address field. Press enter (PC) or return (Mac).

4. The login screen will appear. Enter ubnt in the Username

and Password fields. Read the Ubiquiti License Agreement,

and check the box next to I agree to the terms of this License

Agreement to accept it. Click Login.

The EdgeOS Configuration Interface will appear, allowing you to

customize your settings as needed.

Refer to the EdgeRouter Lite User Guide for instructions on

configuring the EdgeRouter Lite. The User Guide is available at

documentation.ubnt.com

EdgeRouter Lite Quick Start Guide

Specifications

EdgeRouter Lite

Dimensions 197.52 x 91 x 28 mm

Weight 289.2 g

Power Input 12VDC, 1A Power Adapter (Included)

Button Reset

Processor Dual-Core 500 MHz, MIPS64

with Hardware Acceleration

for Packet Processing

System Memory 512 MB DDR2 RAM

Code Storage 2 GB

Certications CE, FCC, IC

Wall-Mount Yes

Operating Temperature -10 to 45°C (14 to 113° F)

Operating Humidity 90% Non-Condensing

LEDs Per Port

Serial Console Port Power

Data Ports Speed/Link/Activity

Networking Interfaces

Serial Console Port (1) RJ45 Serial Port

Data Ports (3) 10/100/1000 Ethernet Ports

Autres manuels pour ERLite-3

Table des matières

Autres manuels Ubiquiti Routeur réseau

Ubiquiti

Ubiquiti edgerouter X SFP Manuel utilisateur

Ubiquiti

Ubiquiti UFiber UF-WIFI Manuel d'instructions

Ubiquiti

Ubiquiti AiAF-5 Manuel utilisateur

Ubiquiti

Ubiquiti ERLite-3 Manuel utilisateur

Ubiquiti

Ubiquiti UniFi AP PRO Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter 6P Manuel utilisateur

Ubiquiti

Ubiquiti EdgePoint R8 Manuel de l'opérateur

Ubiquiti

Ubiquiti LTU LR Manuel utilisateur

Ubiquiti

Ubiquiti ER-12 Manuel utilisateur

Ubiquiti

Ubiquiti ER-8-XG Manuel utilisateur

Ubiquiti

Ubiquiti UFber loco Manuel utilisateur

Ubiquiti

Ubiquiti UniFi Security Gateway PRO Manuel utilisateur

Ubiquiti

Ubiquiti PowerBridge M3 Manuel utilisateur

Ubiquiti

Ubiquiti UCK-G2 Manuel utilisateur

Ubiquiti

Ubiquiti AmpliFi AFi-G Manuel utilisateur

Ubiquiti

Ubiquiti EdgePoint EP-R8 Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter ER-8 Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter X ER-X-SFP Manuel utilisateur

Ubiquiti

Ubiquiti LiteStation2 Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter LITE Manuel utilisateur

Ubiquiti

Ubiquiti UDM Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter PoE ERPoe-5 Manuel utilisateur

Ubiquiti

Ubiquiti ER-12 Manuel utilisateur

Ubiquiti

Ubiquiti EdgeRouter PoE ERPoe-5 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité