TSI Instruments HM675 Manuel utilisateur

HYDRONIC MANOMETER

MODEL HM675

OWNER’S MANUAL

P/N 6006821, REVISION A

MAY 2013

netzerotools.com

TSI Alnor HM675 Hydronic Manometer

netzerotools.com

HYDRONIC MANOMETER

MODEL HM675

OWNER’S MANUAL

P/N 6006821, REVISION A

MAY 2013

netzerotools.com

ii Hydronic Manometer Model HM675

M a n u a l H i s t o r y

The following is a manual history of the Hydronic Manometer

Model HM675 Owner’s Manual (P/N 6006821).

Revision Date

A May 2013

netzerotools.com

iii

Wa r r a n t y

Part Number 6006821 / Revision A / May 2013

Limitation of Warranty

and Liability

(effective June 2011)

Seller warrants the goods sold hereunder, under normal use and service as

described in the operator's manual, shall be free from defects in workmanship and

material for twenty-four (24) months, or if less, the length of time specified in the

operator's manual, from the date of shipment to the customer. This warranty period is

inclusive of any statutory warranty. This limited warranty is subject to the following

exclusions and exceptions:

a. Hot-wire or hot-film sensors used with research anemometers, and certain other

components when indicated in specifications, are warranted for 90 days from the

date of shipment;

b. Pumps are warranted for one year or 3000 hours; whichever comes first;

c. Parts repaired or replaced as a result of repair services are warranted to be free

from defects in workmanship and material, under normal use, for 90 days from the

date of shipment;

d. Seller does not provide any warranty on finished goods manufactured by others or

on any fuses, batteries or other consumable materials. Only the original

manufacturer's warranty applies;

e. Unless specifically authorized in a separate writing by Seller, Seller makes no

warranty with respect to, and shall have no liability in connection with, goods which

are incorporated into other products or equipment, or which are modified by any

person other than Seller.

The foregoing is IN LIEU OF all other warranties and is subject to the LIMITATIONS

stated herein. NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR

PARTICULAR PURPOSE OR MERCHANTABILITY IS MADE. WITH RESPECT TO

SELLER’S BREACH OF THE IMPLIED WARRANTY AGAINST INFRINGEMENT,

SAID WARRANTY IS LIMITED TO CLAIMS OF DIRECT INFRINGEMENT AND

EXCLUDES CLAIMS OF CONTRIBUTORY OR INDUCED INFRINGEMENTS.

BUYER’S EXCLUSIVE REMEDY SHALL BE THE RETURN OF THE PURCHASE

PRICE DISCOUNTED FOR REASONABLE WEAR AND TEAR OR AT SELLER’S

OPTION REPLACEMENT OF THE GOODS WITH NON-INFRINGING GOODS.

TO THE EXTENT PERMITTED BY LAW, THE EXCLUSIVE REMEDY OF THE

USER OR BUYER, AND THE LIMIT OF SELLER'S LIABILITY FOR ANY AND ALL

LOSSES, INJURIES, OR DAMAGES CONCERNING THE GOODS (INCLUDING

CLAIMS BASED ON CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR

OTHERWISE) SHALL BE THE RETURN OF GOODS TO SELLER AND THE

REFUND OF THE PURCHASE PRICE, OR, AT THE OPTION OF SELLER, THE

REPAIR OR REPLACEMENT OF THE GOODS. IN THE CASE OF SOFTWARE,

SELLER WILL REPAIR OR REPLACE DEFECTIVE SOFTWARE OR IF UNABLE TO

DO SO, WILL REFUND THE PURCHASE PRICE OF THE SOFTWARE. IN NO

EVENT SHALL SELLER BE LIABLE FOR LOST PROFITS OR ANY SPECIAL,

CONSEQUENTIAL OR INCIDENTAL DAMAGES. SELLER SHALL NOT BE

RESPONSIBLE FOR INSTALLATION, DISMANTLING OR REINSTALLATION

netzerotools.com

iv Hydronic Manometer Model HM675

COSTS OR CHARGES. No Action, regardless of form, may be brought against Seller

more than 12 months after a cause of action has accrued. The goods returned under

warranty to Seller's factory shall be at Buyer's risk of loss, and will be returned, if at all,

at Seller's risk of loss.

Buyer and all users are deemed to have accepted this LIMITATION OF WARRANTY

AND LIABILITY, which contains the complete and exclusive limited warranty of Seller.

This LIMITATION OF WARRANTY AND LIABILITY may not be amended, modified or

its terms waived, except by writing signed by an Officer of Seller.

Trademarks

CompuDat is a trademark of TSI Incorporated. TSI and the TSI logo are registered

trademark of TSI Incorporated. Microsoft, Excel, Windows, and Vista are registered

trademarks of Microsoft Corporation.

netzerotools.com

Co n t e n t s

Manual History.........................................................................................0-ii

Warranty ..................................................................................................0-iii

About This Manual .................................................................................0-iii

Formatting and Typography ............................................................... 0-iii

Technical Assistance—Help! ............................................................. 0-iii

Safety Information ...................................................................................0-v

Labels .................................................................................................. 0-v

Description of Caution/Warning Symbols .......................................... 0-vi

Caution ............................................................................................ 0-vi

Warning ........................................................................................... 0-vi

Caution or Warning Symbols .......................................................... 0-vi

CHAPTER 1 Introduction ........................................................................1-1

Instrument Description ........................................................................ 1-2

Unpacking ........................................................................................... 1-3

CHAPTER 2 Instrument Operation ........................................................2-1

Keypad ................................................................................................ 2-1

Powering the Instrument ..................................................................... 2-2

Using the AC Adapter ...................................................................... 2-2

Battery Installation ........................................................................... 2-3

Battery Charging .............................................................................. 2-4

Zeroing the Manometer ....................................................................... 2-6

Zeroing the Gauge Pressure Sensor ............................................... 2-6

Zeroing the Differential Pressure Sensor ........................................ 2-6

Connecting the Manometer to the Test Points.................................... 2-7

Attaching the Hoses to the Manometer ........................................... 2-7

Bleeding the Entrained Air ............................................................... 2-7

Attaching the Hoses to the Test Points ........................................... 2-8

Performing Pressure Measurements .................................................. 2-8

Pressure Measurement Screen ....................................................... 2-8

Continuous Measurements .............................................................. 2-9

Discrete Pressure Measurements ................................................... 2-9

Performing Temperature Measurements ............................................ 2-9

Connecting the Temperature Probe ................................................ 2-9

Disconnecting the Manometer from the Test Points ......................... 2-10

CHAPTER 3 Maintenance and Troubleshooting ..................................3-1

Routine Maintenance .......................................................................... 3-1

Draining the Hoses .......................................................................... 3-1

Draining the Manometer Valve ........................................................ 3-1

In-Line Flow Restrictor ..................................................................... 3-2

Cleaning the In-line Flow Restrictors ............................................... 3-2

Cleaning the Instrument Housing .................................................... 3-2

Calibration ........................................................................................... 3-3

netzerotools.com

ii Hydronic Manometer Model HM675

Troubleshooting .................................................................................. 3-4

Technical Contacts .............................................................................. 3-5

APPENDIX A Specifications .................................................................. A-1

APPENDIX B Compliance ...................................................................... B-1

netzerotools.com

iii

Abo u t T h i s M a n u a l

This manual explains how to set up, operate, and maintain the TSI®

Hydronic Manometer Model HM675. Please read it thoroughly before using

the instrument.

F o r m a t t i n g a n d T y p o g r a p h y

Step-by-step instructions are numbered: 1, 2, 3, etc., set flush-left

against the inside margin.

References to keys on the manometer and the instrument's displayed

readout are represented in bold typeface. In addition to the different

typeface, displayed messages appear in quotes.

T e c h n i c a l A s s i s t a n c e —H e l p !

For technical assistance or questions about the instrument or this manual,

or if the HM675 Hydronic Manometer needs repair or recalibration, call

Technical Support.

netzerotools.com

iv Hydronic Manometer Model HM675

(This page intentionally left blank)

netzerotools.com

Autres manuels pour HM675

Table des matières

Autres manuels TSI Instruments Instrument de mesure

TSI Instruments

TSI Instruments Alnor Airflow AXD610 Manuel d'utilisation

TSI Instruments

TSI Instruments DP-CALC 5815 Manuel d'utilisation

TSI Instruments

TSI Instruments Aerotrak 9303 Manuel utilisateur

TSI Instruments

TSI Instruments SidePak AM520 Manuel utilisateur

TSI Instruments

TSI Instruments ALNOR 9880 Manuel utilisateur

TSI Instruments

TSI Instruments 5300 Series Guide de configuration

TSI Instruments

TSI Instruments VelociCalc 9555 Instructions de montage

TSI Instruments

TSI Instruments questemp 44 Manuel utilisateur

TSI Instruments

TSI Instruments AirAssure Manuel utilisateur

TSI Instruments

TSI Instruments HM685 Manuel utilisateur

TSI Instruments

TSI Instruments DustTrak 8520 Manuel d'utilisation

TSI Instruments

TSI Instruments Sizer 3310A Manuel utilisateur

TSI Instruments

TSI Instruments AIRASSURE 8144 Manuel utilisateur

TSI Instruments

TSI Instruments 5300 Series Manuel utilisateur

TSI Instruments

TSI Instruments VelociCheck 8330 Manuel d'utilisation

TSI Instruments

TSI Instruments ALNOR AXD 530 Manuel utilisateur

TSI Instruments

TSI Instruments 3082 Manuel utilisateur

TSI Instruments

TSI Instruments VELOCICALC 9565 Series Manuel d'utilisation

TSI Instruments

TSI Instruments 5200 Series Manuel utilisateur

TSI Instruments

TSI Instruments 3321 Manuel d'utilisation

TSI Instruments

TSI Instruments VelociCalc 9515-AC Manuel d'utilisation

TSI Instruments

TSI Instruments HM675 Instructions d'utilisation et d'entretien

TSI Instruments

TSI Instruments AIRASSURE PM2.5 Manuel d'utilisation et d'entretien

TSI Instruments

TSI Instruments ALNOR LOFLO BALOMETER Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur