TSI Instruments DUSTTRAK 8533 Instructions d'installation
Exposure Monitoring
Model 8533/8534
DUSTTRAK™ DRX Aerosol Monitor
Operation and Service Manual
P/N 6001898, Revision E
March 2010
Copyright ©
TSI Incorporated / 2008–2010 / All rights reserved.
Limitation of Warranty and Liability (effective July 2000)
Seller warrants the goods sold hereunder, under normal use and service as described in the
operator's manual, shall be free from defects in workmanship and material for twenty-four (24)
months, or the length of time specified in the operator's manual, from the date of shipment to the
customer. This warranty period is inclusive of any statutory warranty. This limited warranty is
subject to the following exclusions:
a. Hot-wire or hot-film sensors used with research anemometers, and certain other components
when indicated in specifications, are warranted for 90 days from the date of shipment.
b. Parts repaired or replaced as a result of repair services are warranted to be free from defects
in workmanship and material, under normal use, for 90 days from the date of shipment.
c. Seller does not provide any warranty on finished goods manufactured by others or on any
fuses, batteries or other consumable materials. Only the original manufacturer's warranty
applies.
d. Unless specifically authorized in a separate writing by Seller, Seller makes no warranty with
respect to, and shall have no liability in connection with, goods which are incorporated into
other products or equipment, or which are modified by any person other than Seller.
The foregoing is IN LIEU OF all other warranties and is subject to the LIMITATIONS stated
herein. NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR
PARTICULAR PURPOSE OR MERCHANTABILITY IS MADE.
TO THE EXTENT PERMITTED BY LAW, THE EXCLUSIVE REMEDY OF THE USER OR
BUYER, AND THE LIMIT OF SELLER'S LIABILITY FOR ANY AND ALL LOSSES,
INJURIES, OR DAMAGES CONCERNING THE GOODS (INCLUDING CLAIMS BASED
ON CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) SHALL
BE THE RETURN OF GOODS TO SELLER AND THE REFUND OF THE PURCHASE
PRICE, OR, AT THE OPTION OF SELLER, THE REPAIR OR REPLACEMENT OF THE
GOODS. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY SPECIAL,
CONSEQUENTIAL OR INCIDENTAL DAMAGES. SELLER SHALL NOT BE
RESPONSIBLE FOR INSTALLATION, DISMANTLING OR REINSTALLATION COSTS
OR CHARGES. No Action, regardless of form, may be brought against Seller more than 12
months after a cause of action has accrued. The goods returned under warranty to Seller's
factory shall be at Buyer's risk of loss, and will be returned, if at all, at Seller's risk of loss.
Buyer and all users are deemed to have accepted this LIMITATION OF WARRANTY AND
LIABILITY, which contains the complete and exclusive limited warranty of Seller. This
LIMITATION OF WARRANTY AND LIABILITY may not be amended, modified or its terms
waived, except by writing signed by an Officer of Seller.
Service Policy
Knowing that inoperative or defective instruments are as detrimental to TSI as they are to our
customers, our service policy is designed to give prompt attention to any problems.
i
CONTENTS
SAFETY INFORMATION ................................................................... III
Laser Safety......................................................................................iii
Labels...............................................................................................iv
Description of Caution/Warning Symbols.........................................iv
Caution.......................................................................................iv
Warning......................................................................................iv
Caution and Warning Symbols......................................................... v
Reusing and Recycling..................................................................... v
CHAPTER 1 UNPACKING AND PARTS IDENTIFICATION ........... 1
Unpacking the DUSTTRAK™DRX Aerosol Monitor........................... 1
Parts Identification for the DUSTTRAK™ DRX Desktop Aerosol
Monitor Model 8533....................................................................... 5
Parts Identification for the DUSTTRAK™ DRX Handheld Aerosol
Monitor Model 8534....................................................................... 6
CHAPTER 2 SETTING UP................................................................ 7
Supplying Power to the DUSTTRAK™DRX Aerosol Monitor.............7
Installing the Batteries in 8533 Desktop..................................... 7
Installing the Batteries in 8534 Handheld .................................. 7
Using the AC Adapter to Run Instrument................................... 8
Battery Charging........................................................................ 8
Inlet Cap..................................................................................... 8
Instrument Setup .............................................................................. 9
Connecting to the Computer...................................................... 9
Installing TRAKPROTM Data Analysis Software ........................... 9
Connecting Analog/Alarm Output ............................................ 10
Wiring the Analog Output ............................................................... 10
Wiring the Alarm............................................................................. 11
CHAPTER 3 OPERATION.............................................................. 13
Getting Started................................................................................ 13
Setup Menu .................................................................................... 14
Zero Cal.................................................................................... 15
Flow Cal ................................................................................... 16
User Cal ................................................................................... 17
Alarm........................................................................................ 22
Analog...................................................................................... 25
Settings .................................................................................... 26
Run Mode................................................................................. 28
Survey Mode............................................................................ 29
Manual Mode ........................................................................... 30
Log Mode (1–5)........................................................................ 31
ii
Taking Mass Concentration Measurements...................................32
Screen Regions........................................................................33
Stats .........................................................................................34
Graphing...................................................................................36
Viewing Data...................................................................................38
Title Bar...........................................................................................39
CHAPTER 4 MAINTENANCE.........................................................41
Maintenance Schedule...................................................................41
Zeroing Instrument..........................................................................42
Cleaning the Inlet............................................................................43
Cleaning 2.5 µm Calibration Impactor............................................44
Replacing the Internal Filters..........................................................45
Storage Precautions .......................................................................49
CHAPTER 5 TROUBLESHOOTING...............................................51
APPENDIX A SPECIFICATIONS...................................................55
APPENDIX B DRX ADVANCED CALIBRATION..........................57
Option 1: Serial Gravimetric Calibration .........................................57
Step 1: PCF Calibration............................................................57
Step 2: SCF Calibration............................................................57
Option 2: Parallel Gravimetric Calibration ......................................58
APPENDIX C ZERO MODULE ......................................................61
INDEX ................................................................................................63
iii
Safety Information
IMPORTANT
There are no user serviceable parts inside the instrument. Refer all
repair and maintenance to a qualified factory-authorized technician.
All maintenance and repair information in this manual is included
for use by a qualified factory-authorized technician.
Laser Safety
•The Model 8533/8534 DUSTTRAK™DRX monitor is a Class I laser-
based instrument
•During normal operation, you will not be exposed to laser radiation
•Precaution should be taken to avoid exposure to hazardous radiation in
the form of intense, focused, visible light
•Exposure to this light may cause blindness
Take these precautions:
•DO NOT remove any parts from the DUSTTRAK™DRX monitor unless
you are specifically told to do so in this manual
•DO NOT remove the housing or covers. There are no serviceable
components inside the housing
WARNING
The use of controls, adjustments, or procedures other
than those specified in this manual may result in exposure
to hazardous optical radiation.
WARNING
There are no user-serviceable parts inside this
instrument. The instrument should only be opened by TSI
or a TSI approved service technician.
When operated according to the manufacturer’s instruction, this device is a
Class I laser product as defined by U.S. Department of Health and Human
Services standards under the Radiation Control for Health and Safety Act of
1968. A certification and identification label like the one shown below is
affixed to each instrument.
iv
Labels
Advisory labels and identification labels are attached to the instrument.
1. Serial Number Label
(bottom)
2. Laser Radiation Label
(internal)
DANGER!
VISIBLE LASER RADIATION WHEN
OPEN. AVOID DIRECT EXPOSURE
TO BEAM
WARNING: NO USER SERVICABLE
PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL
3. European symbol for non-
disposable item. Item must
be recycled.
Description of Caution/Warning Symbols
Appropriate caution/warning statements are used throughout the manual and
on the instrument that require you to take cautionary measures when
working with the instrument.
Caution
Caution
Failure to follow the procedures prescribed in this
manual might result in irreparable equipment damage.
Important information about the operation and
maintenance of this instrument is included in this
manual.
Warning
WARNING
Warning means that unsafe use of the instrument could
result in serious injury to you or cause damage to the
instrument. Follow the procedures prescribed.
v
Caution and Warning Symbols
The following symbols may accompany cautions and warnings to indicate
the nature and consequences of hazards:
Warns that the instrument contains a laser and that
important information about its safe operation and
maintenance is included in the manual.
Warns that the instrument is susceptible to electro-static
discharge (ESD) and ESD protection should be followed
to avoid damage.
Indicates the connector is connected to earth ground and
cabinet ground.
Reusing and Recycling
As part of TSI Incorporated’s effort to have a minimal
negative impact on the communities in which its products
are manufactured and used:
Do not dispose of used batteries in the trash. Follow
local environmental requirements for battery
recycling.
If instrument becomes obsolete, return to TSI for
disassembly and recycling.
vi
(page intentionally left blank)
1
Chapter 1
Unpacking and Parts Identification
Carefully unpack the Model 8533/34 DUSTTRAK™DRX Aerosol Monitor
from the shipping container. Use the tables and illustrations below to make
certain that there are no missing components. Contact TSI immediately if
anything is missing or damaged.
Unpacking the DUSTTRAK™DRX Aerosol Monitor
Compare all the components you received with those listed in the table
below. If any parts are missing, contact TSI.
Item Qty Part
Number Description
or
1 8533
8534
Desktop DRX
Handheld DRX
1 801670
801669
Desktop DRX
Carrying Case
Handheld DRX
Carrying Case
1 Data Analysis
Software CD-
ROM
Chapter 1
2
Item Qty Part
Number Description
1 800663 Zero Filter
or
1 801680
801681
6600 mAH
Lithium Ion
Rechargeable
Battery (Desktop)
Rechargeable
lithium ion battery
(Handheld)
1 1303740 USB cable
1 801652 Analog/alarm
output cable
(Desktop models
only)
1 Operation and
Service Manual
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels TSI Instruments Instrument de mesure
TSI Instruments
TSI Instruments VelociCalc 9555 Instructions de montage
TSI Instruments
TSI Instruments DustTrak DRX Manuel utilisateur
TSI Instruments
TSI Instruments ALNOR AVM430A Manuel d'utilisation
TSI Instruments
TSI Instruments EG4 Manuel utilisateur
TSI Instruments
TSI Instruments Q-Trak XP Manuel d'utilisation
TSI Instruments
TSI Instruments AIRASSURE 8144 Manuel utilisateur
TSI Instruments
TSI Instruments AIRASSURE 8144 Manuel utilisateur
TSI Instruments
TSI Instruments Quest The Edge Manuel utilisateur
TSI Instruments
TSI Instruments Aerotrak 9303 Manuel utilisateur
TSI Instruments
TSI Instruments 4040 Manuel d'utilisation
TSI Instruments
TSI Instruments 3936 SMPS Manuel utilisateur
TSI Instruments
TSI Instruments 3936 Manuel d'utilisation
TSI Instruments
TSI Instruments Aerotrak 9303 Manuel utilisateur
TSI Instruments
TSI Instruments 4000 Series Mode d’emploi
TSI Instruments
TSI Instruments AirAssure Manuel utilisateur
TSI Instruments
TSI Instruments ALNOR MicroManometer AXD 550 Manuel utilisateur
TSI Instruments
TSI Instruments Flowmaster 250 Mode d’emploi
TSI Instruments
TSI Instruments VelociCalc Plus 8384 Manuel d'utilisation
TSI Instruments
TSI Instruments ALNOR RVA501 Manuel d'utilisation
TSI Instruments
TSI Instruments ALNOR LOFLO BALOMETER Series Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur