TSI Instruments 4040 Manuel d'utilisation

www.tsi.com

General Purpose

Thermal Mass

Flow Meter

Model 4040/4043/4045

Operation and Service Manual

P/N 1980339, Revision M

April 2022

Start Seeing the Benefits

of Registering Today!

Thank you for your TSI®instrument purchase. Occasionally,

TSI®releases information on software updates, product

enhancements and new products. By registering your

instrument, TSI®will be able to send this important information

to you.

http://register.tsi.com

As part of the registration process, you will be asked for your

comments on TSI products and services. TSI’s customer

feedback program gives customers like you a way to tell us

how we are doing.

General Purpose

Thermal Mass

Flow Meter

Model 4040/4043/4045

Operation and Service Manual

P/N 1980339, Revision M

April 2022

U.S. & INTERNATIONAL TSI Instruments Ltd. (UK)

Sales and Customer Service: Sales and Customer Service:

(800) 680-1220 / +1(651) 490-2860 +44 (0) 1494 459200

Fax:

+1(651) 490-3824

Address

TSI Incorporated / 500 Cardigan Road / Shoreview, MN 55126 USA

WARNING

TSI®Incorporated flow meters employ a heated

platinum sensor. They should not be used with

flammable or explosive gasses or mixtures.

C A U T I O N

TSI®Incorporated flow meters are not medical devices

under FDA 510k and in no situation should they be

utilized for human respiration measurements.

LIMITATION OF WARRANTY AND LIABILITY (effective February 2015)

(For country-specific terms and conditions outside of the USA, please visit www.tsi.com.)

Seller warrants the goods, excluding software, sold hereunder, under normal use and

service as described in the operator's manual, to be free from defects in workmanship

and material for 12 months, or if less, the length of time specified in the operator's

manual, from the date of shipment to the customer. This warranty period is inclusive of

any statutory warranty. This limited warranty is subject to the following exclusions and

exceptions:

a. Hot-wire or hot-film sensors used with research anemometers, and certain other

components when indicated in specifications, are warranted for 90 days from the date

of shipment;

b. Pumps are warranted for hours of operation as set forth in product or operator’s

manuals;

c. Parts repaired or replaced as a result of repair services are warranted to be free from

defects in workmanship and material, under normal use, for 90 days from the date of

shipment;

d. Seller does not provide any warranty on finished goods manufactured by others or on

any fuses, batteries or other consumable materials. Only the original manufacturer's

warranty applies;

e. This warranty does not cover calibration requirements, and seller warrants only that

the instrument or product is properly calibrated at the time of its manufacture.

Instruments returned for calibration are not covered by this warranty;

f. This warranty is VOID if the instrument is opened by anyone other than a factory

authorized service center with the one exception where requirements set forth in the

manual allow an operator to replace consumables or perform recommended cleaning;

g. This warranty is VOID if the product has been misused, neglected, subjected to

accidental or intentional damage, or is not properly installed, maintained, or cleaned

according to the requirements of the manual. Unless specifically authorized in a

separate writing by Seller, Seller makes no warranty with respect to, and shall have no

liability in connection with, goods which are incorporated into other products or

equipment, or which are modified by any person other than Seller.

The foregoing is IN LIEU OF all other warranties and is subject to the LIMITATIONS

stated herein. NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR

PARTICULAR PURPOSE OR MERCHANTABILITY IS MADE. WITH RESPECT TO

SELLER’S BREACH OF THE IMPLIED WARRANTY AGAINST INFRINGEMENT, SAID

WARRANTY IS LIMITED TO CLAIMS OF DIRECT INFRINGEMENT AND EXCLUDES

CLAIMS OF CONTRIBUTORY OR INDUCED INFRINGEMENTS. BUYER’S

EXCLUSIVE REMEDY SHALL BE THE RETURN OF THE PURCHASE PRICE

DISCOUNTED FOR REASONABLE WEAR AND TEAR OR AT SELLER’S OPTION

REPLACEMENT OF THE GOODS WITH NON-INFRINGING GOODS.

TO THE EXTENT PERMITTED BY LAW, THE EXCLUSIVE REMEDY OF THE USER

OR BUYER, AND THE LIMIT OF SELLER'S LIABILITY FOR ANY AND ALL LOSSES,

INJURIES, OR DAMAGES CONCERNING THE GOODS (INCLUDING CLAIMS

BASED ON CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE)

SHALL BE THE RETURN OF GOODS TO SELLER AND THE REFUND OF THE

PURCHASE PRICE, OR, AT THE OPTION OF SELLER, THE REPAIR OR

REPLACEMENT OF THE GOODS. IN THE CASE OF SOFTWARE, SELLER WILL

REPAIR OR REPLACE DEFECTIVE SOFTWARE OR IF UNABLE TO DO SO, WILL

REFUND THE PURCHASE PRICE OF THE SOFTWARE. IN NO EVENT SHALL

SELLER BE LIABLE FOR LOST PROFITS, BUSINESS INTERRUPTION, OR ANY

SPECIAL, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES. SELLER

SHALL NOT BE RESPONSIBLE FOR INSTALLATION, DISMANTLING OR

REINSTALLATION COSTS OR CHARGES. No Action, regardless of form, may be

brought against Seller more than 12 months after a cause of action has accrued. The

goods returned under warranty to Seller's factory shall be at Buyer's risk of loss, and will

be returned, if at all, at Seller's risk of loss.

Buyer and all users are deemed to have accepted this LIMITATION OF WARRANTY

AND LIABILITY, which contains the complete and exclusive limited warranty of Seller.

This LIMITATION OF WARRANTY AND LIABILITY may not be amended, modified or its

terms waived, except by writing signed by an Officer of Seller.

Service Policy

Knowing that inoperative or defective instruments are as detrimental to TSI attention to

any problems. If any malfunction is discovered, please contact your nearest sales office

or representative, or call TSI's Customer Service department at (800) 680-1220 (USA)

or (001 651) 490-2860 (International) or visit www.tsi.com.

Trademarks

TSI and the TSI logo are registered trademarks of TSI Incorporated in the United

States and may be protected under other country’s trademark registrations.

HyperTerminal is a registered trademark of Hilgraeve, Incorporated.

Windows is a registered trademark of Microsoft Corporation.

iii

CONTENTS

1 UNPACKING AND PARTS IDENTIFICATION............................... 1

2 SETTING-UP ................................................................................... 3

Supplying Power............................................................................3

Connecting Filter and Flow Tubes................................................. 4

RS232 Configuration and Operation............................................. 4

Configuration Software..................................................................5

3 OPERATION.................................................................................... 7

Overview........................................................................................7

ON/OFF Switch .............................................................................7

Warm-up Time...............................................................................7

Flow Rate Measurement............................................................... 7

Temperature Measurement........................................................... 8

Pressure Measurement.................................................................8

Volume Measurement................................................................... 8

4 MAINTENANCE .............................................................................. 9

Flow Sensor................................................................................... 9

Re-certification...............................................................................9

Cases ............................................................................................9

Storage..........................................................................................9

5 TROUBLESHOOTING .................................................................. 11

A SPECIFICATIONS*....................................................................... 13

BSTANDARD FLOW RATE VS. VOLUMETRIC FLOW RATE ..... 19

C OPTIMAL USE OF THE 4000/4100 SERIES ANALOG

OUT CAPABILITY........................................................................ 21

Introduction.................................................................................. 21

Function of the Analog Out Feature............................................ 21

Considerations When Needing to Read Zero and Low

Flow Accurately........................................................................ 22

Considerations for Setting the Span Flow Voltage...................... 23

Process for Changing the Analog Zero and Span....................... 23

(This page intentionally left blank)

Chapter 1

Unpacking and Parts Identification

Carefully unpack the instrument and accessories from the shipping

container. Check the individual parts against the list of components

in Table 1. If any parts are missing or damaged, notify TSI®

Incorporated (TSI®) immediately.

Table 1. List of Components

Qty

Item Description

Part/Model

Mass Flow Meter, 22 mm ISO tapered inlet/outlet

Mass Flow Meter, 0.50 inch inlet/outlet

Mass Flow Meter, 0.75 inch inlet/outlet

4040

4043

4045

Computer Cable

1303583

Analog Cable

1303584

Filter

22 mm ISO-taper (for Model 4040)

3/8” Female NPT (for Model 4043/45)

1602292

1602300

AC Adapter

100 to 240 V, N. America NEMA 5-15 plug, grounded

100 to 240 V, Europlug, CEE 7/16, grounded

100 to 240 V, Great Britain, grounded, fused

100 to 240 V, Australia/NZ

8918-NA

8918-EC

8918-GB

8918-AT

Operation and Service Manual

1980339

RS232 Serial Command Set manual

1980340

Carrying Case (optional accessory)

1319176

Chapter 1

Parts Identification

Figure 1-1 Model 4040/4043/4045 Mass Flow Meter

1. On/Off Switch

4. DC Power Input

2. Display

5. Flow Inlet

3. Mounting Inserts (2)

6. Computer Serial Interface and

Analog Output and Optional

Power Input Connector

Autres manuels pour 4040

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels TSI Instruments Instrument de mesure

TSI Instruments

TSI Instruments 5300 Series Guide de configuration

TSI Instruments

TSI Instruments 3321 Manuel d'utilisation

TSI Instruments

TSI Instruments SidePak AM520 Manuel utilisateur

TSI Instruments

TSI Instruments 3082 Manuel utilisateur

TSI Instruments

TSI Instruments VelociCalc 9515-AC Manuel d'utilisation

TSI Instruments

TSI Instruments 4199 Manuel d'utilisation

TSI Instruments

TSI Instruments DustTrak 8540 Manuel d'utilisation

TSI Instruments

TSI Instruments Alnor AirGard 405 Manuel utilisateur

TSI Instruments

TSI Instruments VelociCalc 9545 Manuel d'utilisation

TSI Instruments

TSI Instruments DP-CALC 5825 Manuel d'utilisation

TSI Instruments

TSI Instruments ALNOR 9880 Manuel utilisateur

TSI Instruments

TSI Instruments Aerotrak 9303 Manuel utilisateur

TSI Instruments

TSI Instruments Aerotrak 9303 Manuel utilisateur

TSI Instruments

TSI Instruments Quest Edge 7 Manuel utilisateur

TSI Instruments

TSI Instruments DP-CALC 5815 Manuel d'utilisation

TSI Instruments

TSI Instruments ALNOR HM670 Manuel utilisateur

TSI Instruments

TSI Instruments CA-CALC 6203 Series Manuel d'utilisation

TSI Instruments

TSI Instruments ALNOR MicroManometer AXD 550 Manuel utilisateur

TSI Instruments

TSI Instruments VelociCalc 9600 Series Manuel d'utilisation

TSI Instruments

TSI Instruments Cheetah CH-5 Manuel utilisateur

TSI Instruments

TSI Instruments Q-Trak XP Manuel d'utilisation

TSI Instruments

TSI Instruments 3080 Series Manuel d'utilisation

TSI Instruments

TSI Instruments SIZER 3321 Manuel utilisateur

TSI Instruments

TSI Instruments 9600 Series Manuel d'utilisation

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur