Tripp Lite SmartOnline SU80KTV Guide d'installation
SmartOnline 80kVA Modular 3-Phase UPS System,
On-line Double-Conversion UPS for North America
MODEL NUMBER: SU80KTV
Description
Tripp Lite's SU80KTV (80kVA) SmartOnline Modular 3-Phase Intelligent, True On-Line UPS System provides
100% system availability with N+1 modular architecture and 1+1 parallel capability. In an N+1 configuration, the
SU80KTV features four self-contained, redundant 20kVA power modules that can be hot-swapped (with the load
powered) if maintenance is required. Connect two SU80KTV models in parallel (1+1 configuration) to provide
fail-safe redundancy (two 80kVA models supporting a 80kVA load) or to increase capacity (two 80kVA models
supporting a 160kVA load).
The SU80KTV provides mission-critical equipment with the highest level of power protection available. Large
capacity 80,000VA/64,000W UPS continually converts incoming AC power into filtered DC power, and then
resynthesizes it back into AC power with a pure sine wave. Perfectly regulated, continuous sine wave output with
zero transfer time offers compatibility with all equipment types. The SU80KTV's high input power factor,
advanced IGBT inverter technology and Digital Signal Processor (DSP) technology create less than 3% input
Total Harmonic Distortion (THDi). With SU80KTV's low THDi, generators run cooler and last longer, allowing
managers to save installation costs by installing a generator with a capacity equal to their equipment load (a 1:1 ratio). Extremely efficient operation (up to
96%) saves money by lowering electricity consumption. Hardwire input and output connections support a variety of permanent or PDU style power
connections. The SU80KTV features 277/480VAC, 3-phase, 4-wire (plus ground), wye input and output. It also features a wide input voltage correction range
(218-348/378-603VAC at full load). Frequency is 50 or 60 Hz (auto-selectable). The SU80KTV features a single small-footprint tower power module. A
stand-alone hardwired external battery module (Models BP480V26B or BP480V40C with matching battery cabinets, available separately) is required for
operation and to provide battery backup support. Additional external BP480V26B or BP480V40C battery modules can be connected for extended runtime.
Other battery cabinets for extended runtime solutions also available; contact Tripp Lite for more information. A manual bypass breaker as well as an automatic
bypass function ensure 100% availability of connected equipment by safely passing through AC power if the UPS requires maintenance. A built-in RS-232
communication port works with included PowerAlert Software to provide shutdown commands and reporting on a single server. An accessory slot accepts an
optional internal SNMP card (Model SNMPWEBCARD) for remote shutdowns, reboots and more. Front panel combination LCD/LED display alerts users to a
variety of UPS operational modes and conditions. The LCD display includes a real-time event log screen with up to 500 events listed. A dynamic battery
management screen optimizes battery function to lengthen service life and allows cold restart of UPS during a prolonged blackout to utilize its batteries for
Highlights
80,000 VA (80kVA) tower UPS
with 4 hot-swappable power
modules
N+1 redundant modular
architecture helps ensure 100%
availability
1+1 parallel capability allows for
system redundancy or increased
capacity
Low THDi saves installation costs
by allowing 1:1 generator sizing
3-phase hardwire (277/480VAC)
input/output. Wide input voltage
correction range
(218-348/378-603VAC at full
load)
On-line, double-conversion
operation with zero transfer time;
IGBT technology; extremely
efficient operation (up to 96%)
Runtime is expandable via
external battery cabinet options
Package Includes
SU80KTV UPS System
PowerAlert Software and cabling
Parallel cable (for 1+1 operation)
Instruction manual and startup
checklist
Warranty information
1 / 6
periodic system access or data retrieval. An Emergency Power Off button turns UPS output OFF and disables Bypass output. Built-in Emergency Power Off
(EPO) dry-contact interface supports remote emergency shutdown in large facilities. A start-up service program is recommended to enhance the reliability of
the installation.
Features
N+1 configuration: four self-contained, redundant 20kVA power modules can be hot-swapped (with the load powered) if maintenance is required
1+1 configuration: connect two SU80KTV models in parallel to provide fail-safe redundancy or to increase capacity
High input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology create low input Total Harmonic Distortion
(THDi)
Extremely efficient operation (up to 96%) saves money by lowering electricity consumption
True on-line, double conversion UPS with IGBT technology provides pure, sine wave AC output at all times
Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
80,000VA/64,000W power capacity with 3-phase, hardwire 277/480VAC input/output connections
Features a wide input voltage correction range (218-348/378-603VAC at full load)
Precision +/-1% output voltage regulation
A stand-alone hardwired external battery module (Models BP480V26B and BP480V40C, available separately from Tripp Lite) is required for operation
and to provide battery backup support. Additional external battery modules can be connected for extended runtime.
Front panel combination LCD/LED display includes a real-time event log screen with up to 500 events listed
Dynamic battery management screen optimizes battery function to lengthen service life and allows cold restart of UPS
Built-in RS-232 communication port works with included PowerAlert Software to provide shutdown commands and reporting on a single server
Accessory slot accepts an optional internal SNMP card (model # SNMPWEBCARD) for remote shutdowns, reboots and more
Emergency Power Off button turns UPS output OFF and disables Bypass output
Built-in Emergency Power Off (EPO) dry-contact interface supports remote emergency shutdown in large facilities
Start-up service program is recommended to enhance the reliability of the installation
Specifications
OUTPUT
Output Volt Amp Capacity (VA) 80000
Output kVA capacity (kVA) 80
Output Watt Capacity (watts) 64000
Output kW capacity 64
Output power factor 0.8
Crest Factor 3:1
Nominal Output Voltage(s)
Supported 277/480V; 3-Phase Wye
Frequency compatibility 50 / 60 Hz
Output voltage regulation (line mode) +/-1%
Output voltage regulation (Battery
mode) +/-1%
2 / 6
Built-in UPS output receptacles Hardwire
Output AC waveform (AC mode) Sine wave
Output AC waveform (battery mode) Pure Sine wave
INPUT
Rated input current (at maximum
load) 97A (per phase, online)
Nominal Input Voltage(s) Supported 277/480V (3ph wye)
UPS input connection type Hardwire
UPS input connection description 277/480V (3-Phase, 4 Wire, wye)
Phase 3-Phase
BATTERY
Expandable battery runtime Battery set sold separate
External battery pack compatibility BP480V26B; BP480V40C; BP480V55; BP480V78; BP480V103; BP480V140
Expandable runtime description External battery pack wiring is contractor supplied
DC system voltage (VDC) +/- 240
Battery recharge rate (included
batteries) 2 - 4 hours from 10% to 90%
Battery replacement description Hot-swappable, replaceable batteries
VOLTAGE REGULATION
Voltage regulation description Online, double-conversion power conditioning
Overvoltage correction Maintains continuous operation without using battery power during overvoltages to 348/603 (3-Phase, 4-Wire, wye)
Undervoltage correction Maintains continuous operation without using battery power during brownout / undervoltage conditions to 218/378
(3-Phase, 4-Wire, wye)
LEDS ALARMS & SWITCHES
LED Indicators 4-LED Display: Displays normal AC input, on battery power, bypass input and fault conditions
Alarms Alarms warn against a variety of operational conditions: low-battery, overload, shutdown, bypass and more
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch
Switches
ON button turns UPS's inverter ON. OFF button turns UPS's inverter OFF. LCD Display Control Buttons browses
through and selects items displayed on LCD screen. Emergency Power Off button turns UPS output OFF and
disables Bypass output. Manual Bypass breaker bypasses the UPS's inverter during maintenance.
SURGE / NOISE SUPPRESSION
EMI / RFI AC noise suppression Yes
AC suppression joule rating 4675
AC suppression response time Instantaneous
3 / 6
PHYSICAL
Installation form factors supported
with included accessories Tower
Primary form factor Tower
UPS / Power Module dimensions in
primary form factor (height x width x
depth / inches)
66.9 x 20.5 x 37.7
UPS / Power Module dimensions in
primary form factor (height x width x
depth / cm)
169.9 x 52.1 x 95.8
UPS / Power Module weight (lbs) 1286
UPS / Power Module weight (kg) 583.8
UPS Shipping dimensions (height x
width x depth / inches) 76.2 x 28.8 x 45.5
UPS Shipping dimensions (height x
width x depth / cm) 193.7 x 73 x 115.6
Shipping weight (kg) 0
Cooling method Fans
UPS housing material Steel
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full load) 18665
COMMUNICATIONS
Communications interface DB9 Serial; Slot for SNMP/Web interface
PowerAlert software Included
Communications cable DB9 cabling included
LINE / BATTERY TRANSFER
Transfer time No transfer time (0 ms.) in online, double-conversion mode
SPECIAL FEATURES
Cold Start (startup in battery mode
during a power failure) Cold-start operation supported
High availability UPS features Automatic inverter bypass; Hot swappable batteries
Green & high efficiency features High efficiency economy mode operation; Schedulable daily hours of economy mode operation
4 / 6
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A
(EMI); ROHS (Restriction of Hazardous Substances)
WARRANTY
Product Warranty Period (U.S. &
Canada) 1-year limited warranty
Product Warranty Period
(International) 2-year limited warranty
Product Warranty Period (Mexico) 1-year limited warranty
Product Warranty Period (Puerto
Rico) 2-year limited warranty
Related Items
Optional Products
Model Number Description Qty.
BPE480VB External Battery Pack for Select 3-Phase UPS Systems 1
BPE480VC External Battery Pack for Select 3-Phase UPS Systems 1
BP480V103 External Battery Pack for Select 3-Phase UPS Systems 1
BP480V140 External Battery Pack for Select 3-Phase UPS Systems 1
BP480V26B External Battery Pack for Select 3-Phase UPS Systems 1
BP480V40C External Battery Pack for Select 3-Phase UPS Systems 1
BP480V55 External Battery Pack for Select 3-Phase UPS Systems 1
BP480V78 External Battery Pack for Select 3-Phase UPS Systems 1
ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires SNMPWEBCARD or switched
PDU.) 1
SNMPWEBCARD For remote monitoring and control via SNMP, Web, or Telnet. 1
W06-BW1-247 3-Phase UPS System (60k & 80k) Start-Up and On-Site Warranty Service Programs 1
W06-BW1-247-1B 3-Phase UPS System (60k & 80k) Start-Up and On-Site Warranty Service Programs 1
W06-EW1-247 3-Phase UPS System (60k & 80k) Start-Up and On-Site Warranty Service Programs 1
W06-EW1-247-1B 3-Phase UPS System (60k & 80k) Start-Up and On-Site Warranty Service Programs 1
W06-SCBAS1 3-Phase UPS System (60k & 80k) - Basic Warranty Service Contracts 1
W06-SCBAS1-1B 3-Phase UPS System (60k & 80k) - Basic Warranty Service Contracts - Includes primary battery
cabinet plus one additional battery cabinet 1
W06-SCENH1 3-Phase UPS System (60k & 80k) - Premium Warranty Service Contracts 1
W06-SCENH1-1B 3-Phase UPS System (60k & 80k) - Premium Warranty Service Contracts - Includes primary battery
cabinet plus one additional battery cabinet 1
5 / 6
SUPC2MBP80KX 3-Breaker Parallel Tie Cabinet with Maintenance Bypass Switch (for SU80KX 3-Phase UPS) 1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at:
http://www.tripplite.com/sku/SU80KTV.
© 2014 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos may differ slightly from final products.
6 / 6
Table des matières
Autres manuels Tripp Lite UPS
Tripp Lite
Tripp Lite AVRX Series Manuel utilisateur
Tripp Lite
Tripp Lite Medical Grade UPS Systems SMX & OMNIX Manuel utilisateur
Tripp Lite
Tripp Lite SmartPro SMART1500RMXL2Ua Manuel utilisateur
Tripp Lite
Tripp Lite SM3000RMNAFTA Manuel utilisateur
Tripp Lite
Tripp Lite INTERNET550U Manuel utilisateur
Tripp Lite
Tripp Lite HT1000UPS Manuel utilisateur
Tripp Lite
Tripp Lite 120V AC Manuel utilisateur
Tripp Lite
Tripp Lite RBC24-SUTWR Manuel utilisateur
Tripp Lite
Tripp Lite SmartPro SMART5000RT3U Manuel utilisateur
Tripp Lite
Tripp Lite SMART1500LCDT Manuel utilisateur
Tripp Lite
Tripp Lite SmartOnline S3MX Manuel utilisateur
Tripp Lite
Tripp Lite SUPDM12 Manuel utilisateur
Tripp Lite
Tripp Lite SMART550USBWD Manuel utilisateur
Tripp Lite
Tripp Lite SmartPro SMART700USB Guide de configuration
Tripp Lite
Tripp Lite BCPRO1400 Manuel utilisateur
Tripp Lite
Tripp Lite SmartPro SMART700SER Manuel utilisateur
Tripp Lite
Tripp Lite OMNISMART350HG Manuel utilisateur
Tripp Lite
Tripp Lite SmartOnline AG-0358 Series Manuel utilisateur
Tripp Lite
Tripp Lite SmartPro SMART1050 Manuel utilisateur
Tripp Lite
Tripp Lite SmartPro SMART1000RM2U Manuel
Tripp Lite
Tripp Lite SmartOnline Intelligent True On-Line UPS... Instructions d'installation et d'utilisation
Tripp Lite
Tripp Lite SmartOnline SU1500RTXL2UA Manuel utilisateur
Tripp Lite
Tripp Lite OmniSmart INT 300 PNP Instructions d'utilisation d'origine
Tripp Lite
Tripp Lite SmartPro ST1000RMX2UN Manuel utilisateur
Manuels UPS populaires d'autres marques
Pylontech
Pylontech Victron & Pylontech US5000 Manuel utilisateur
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur
Mecer
Mecer ME-1000-WTU Manuel utilisateur
Mustek
Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation
Emerson
Emerson Liebert NXL series Manuel utilisateur
MAKELSAN
MAKELSAN BOXER SERIES Manuel utilisateur
