TRENDnet TK-208K Manuel utilisateur
TK-208K
User’s Guide
Table of Contents
English ......................................................................................................
Specifications ............................................................................................
Troubleshooting ........................................................................................
1
1
2
4
6
7
1. Before You Start .................................................................................
2. How to Connect .................................................................................
3. Using the KVM Switch .......................................................................
Table of Contents
Version 10.31.05
System Requirements
Application
TK-208K
Multi-Language User’s Guide
2 Sets of KVM & Audio Cables
VGA or SVGA Compatible Monitor
6-pin Mini-Din PS/2 Keyboard
6-pin Mini-Din PS/2 Mouse
Speakers
Microphone
Package Content
1. Before You Start
English
1
Microphone
PC 1
Speakers
Keyboard Mouse
PC 2
LCD Monitor
2-Port PS/2 Audio
KVM Switch
(TK-208K)
1. Connect the Monitor to your
Switch's Console Port.
3. Use the provided KVM cables to
connect your PC to your KVM
switch.
2. How to Connect
English
2
2. Connect the Keyboard, Mouse,
Microphone and Speakers to the
Switch's Console Port.
6. Turn on all connected PC’s.
5. Connect the other end of the Audio
cable to the Switch's Audio Port.
4. Connect the other end of the cable
to the Switch's PC Port.
Your installation is now complete.
English
3
To alternate between computers, you use hot-key commands.
Hot-Key Commands
A keyboard hot-key command consists of three keystrokes:
Hot-Key command = ScrLk + ScrLk + Command key(s)
After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.
You then have another 2 seconds to press a command key. If you do not press
a key within 2 seconds, the switch will exit hot-key mode.
NOTE
1. Hotkey command works on top row numbers keys only.
2. When the binding of PC & Audio/Mic port switching is enabled by the hotkey
sequence, any PC and Audio/Mic switching are bound together.
3. For non-PnP OS(Linux, Windows NT 4.0), please use the following
commands to reset the mouse setting:
4. Mac User must note: Standard PC Keyboard mapping to MAC
Keyboard:
Hot-Key convention: The hotkey notation ,denotes that you should hit the
individual key consecutively one at a time, not simultaneously.
3. Using the KVM Switch
English
4
Command Hot-Keys Description
Quick Reference Sheet for TK-208K
Select PC
Select Audio/Mic
Channel
Next higher PC
channel
Bind PC & Audio/Mic
Switching
Console Mouse/
Keyboard Reset
UnBind PC & Audio/
Mic Switching
Autoscan
Next lower PC
channel
Stop Autoscan
ScrLk ScrLk X
+ +
x = 1 ~ 2 for PC channel number
ScrLk ScrLk
+ +
(Arrow up)
ScrLk ScrLk
+ +
(Arrow down)
ScrLk ScrLk
+ + W
ScrLk ScrLk
+ + End
ScrLk ScrLk
+ + S
Press any key on keyboard
Select the active PC channel.
Select the active Audio/Mic channel
Select the next lower available computer
Enable the binding of PC port and Audio/Mic port
switching.
Reset mouse/keyboard on the console side. (works on
non-PnP OS only)
Disable the binding of PC port and Audio/Mic port
switching.
Autoscan through every connected channel for
quick screen browsing of each channel (scan delay
= 10 seconds).
Select the next higher available computer
Terminate Autoscan activity.
(Fx is a function key) x = 1 ~ 2 for Audio mic
channel number
ScrLk ScrLk
+ +
FX
ScrLk ScrLk
+ +
Q
English
5
Computer Connections: 2
Cable Connectors:
Console Port Connectors:
Keyboard: PS/2 Keyboard 6-pin Mini Din (Female)
Mouse: PS/2 Keyboard 6-pin Mini Din (Female)
Monitor: VGA HDB 15-pin (Female)
Speaker: 3.5mm audio in/out jack
Microphone: 3.5mm microphone in/out jack
6
Specifications
To PC: • 1 x 3.5mm audio in/out jack
• 1 x 3.5mm microphone in/out jack
To Console: 1 x 15-pin HDB type VGA (Male)
KVM
To PC: • 1 x PS/2 Keyboard 6-pin Mini Din (Male)
• 1 x PS/2 Mouse 6-pin Mini Din (Male)
• 1 X VGA HDB 15-pin (Male)
Audio
To Console: 2 x USB (Type Mini B)
Port Selection: Push Button and Hot-Key Commands
Auto-Scan Intervals: 10 seconds
Keyboard State: Saved and Restored
Power Type: PS/2 Interface Power
Dimensions: 95 x 65 x 30 mm (3.7 x 2.6 x 1.2 in.)
Weight: 99 g (3.5 oz)
0º ~ 40ºC (32º ~104º F)Operating Temperature:
-20º ~ 60ºC (-4º ~ 140º F)Storage Temperature:
0%~90%, Non-Condensing
Humidity:
FCC and CECertifications:
KVM Cable: 2 Sets of 1.2M (4ft) KVM & Audio Cables
Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
Where is the power supply? I did not find one in the box.
The TK-208K does not require a power supply. It draws power from
your computer's PS/2 connections. As long as your KVM switch is connected to
the PS/2 port, it will receive the necessary power to function.
I have the KVM switch connected properly, but my keyboard and mouse don't
work.
Please make sure your PS/2 port is working properly by testing it with your
other PS/2 devices. Once you confirm that the PS/2 port is functional, please
reboot your computers, and try to use the KVM switch again.
Can I connect and disconnect the PS/2 cables while the computers are turned
on?
Yes, you can connect or disconnect the PS/2 cables while the computers are
turned on because the PS/2 interface is Plug-and-Play and Hot-Pluggable.
Will the KVM switch remember the keyboard settings between computers?
Yes, the KVM switch will remember the keyboard settings when switching
between your computers. (i.e.: Cap lock, Num key, etc.)
How do I switch from one computer to another with the KVM switch?
You may switch between PCs by pressing the Push button on the KVM switch
or by using the Hot-Key commands.
If you have further questions, please contact TRENDnet’s Technical Support
Department.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
7
Troubleshooting
Limited Warranty
TRENDnet warrants its products against defects in material and
workmanship, under normal use and service, for the following lengths of
time from the date of purchase.
TK-208K - 2 Years Warranty
If a product does not operate as warranted above during the applicable
warranty period, TRENDnet shall, at its option and expense, repair the
defective product or part, deliver to customer an equivalent product or
part to replace the defective item, or refund to customer the purchase
price paid for the defective product. All products that are replaced will
become the property of TRENDnet. Replacement products may be new
or reconditioned.
TRENDnet shall not be responsible for any software, firmware,
information, or memory data of customer contained in, stored on, or
integrated with any products returned to TRENDnet pursuant to any
warranty.
There are no user serviceable parts inside the product. Do not remove
or attempt to service the product by any unauthorized service center.
This warranty is voided if (i) the product has been modified or repaired
by any unauthorized service center, (ii) the product was subject to
accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within
the applicable warranty period for a Return Material Authorization (RMA)
number, accompanied by a copy of the dated proof of the purchase.
Products returned to TRENDnet must be pre-authorized by TRENDnet
with RMA number marked on the outside of the package, and sent
prepaid, insured and packaged appropriately for safe shipment.
8
Autres manuels pour TK-208K
3
Autres manuels TRENDnet Changer
TRENDnet
TRENDnet TE100-DS24 Manuel utilisateur
TRENDnet
TRENDnet TE100-S55E Manuel utilisateur
TRENDnet
TRENDnet TK-404KR Manuel utilisateur
TRENDnet
TRENDnet TEG-S80g - Switch Manuel utilisateur
TRENDnet
TRENDnet TEG-S4M8TX Manuel utilisateur
TRENDnet
TRENDnet TK-801R Manuel utilisateur
TRENDnet
TRENDnet TEG-S80ES Manuel utilisateur
TRENDnet
TRENDnet TK-408K Manuel utilisateur
TRENDnet
TRENDnet TK-1604R Manuel utilisateur
TRENDnet
TRENDnet TE100-S810Fi - Switch Manuel utilisateur
TRENDnet
TRENDnet TEG-160WS Manuel utilisateur
TRENDnet
TRENDnet TK-800R Manuel utilisateur
TRENDnet
TRENDnet TEG-S80TX Manuel utilisateur
TRENDnet
TRENDnet TEG-S80TXE - Copper Gigabit Switch Manuel utilisateur
TRENDnet
TRENDnet TPE-30102WS Manuel utilisateur
TRENDnet
TRENDnet TE100-S50g Manuel utilisateur
TRENDnet
TRENDnet TPE-TG44G Manuel utilisateur
TRENDnet
TRENDnet TE100-S5 Manuel utilisateur
TRENDnet
TRENDnet TEG-S081Fi Manuel utilisateur
TRENDnet
TRENDnet TEG-S224TXA - 26PORT Gigabit Copper Switch 24-10/100... Manuel utilisateur
