TPI SP620 Manuel utilisateur

SP620 Differential Manometer

Smart Probe

Test Products International, Inc.

Test the TPI Advantage

Visit www.testproductsintl.com

Connects to smart phone and uses the

TPI Smart Probe App

Perform differential pressure measure-

ments

Up to 6 SP620 smart probes can connect

to a single mobile device (most devices)

3 Year Limited Warranty

TABLE OF CONTENTS

A. Introduction................................................................ 1

B. Safety Considerations................................................. 1

C. Specifications.............................................................. 1

D. Instrument Overview................................................... 2

E. Taking a Measurement................................................. 3 & 4

F. Additional App Features................................................ 5

G. Drop Down Menu........................................................ 6

H. Entering Company and Customer Information............ 7

I. Performing Tightness Tests.......................................... 7 ~ 9

J. Maintenance................................................................. 10

K. Trouble Shooting.......................................................... 10

L. Accessories.................................................................. 10

M. Warranty....................................................................... 11

N. Replacing Batteries....................................................... 11

A. INTRODUCTION

1. Congratulations: Thank you for purchasing TPI products. The SP620 is

easy to use and built to last. It is backed by a 3 year limited warranty.

2. Product Description: The SP620 is a differential manometer “Smart

Probe”. It connects to your mobile device and uses the TPI Smart

Probe App to display temperature readings. Data can be exported to a

CSV file as well.

B. SAFETY CONSIDERATIONS

1. Never attach the SP620 to a hot surface.

2. Always ensure the pressure being measured does not exceed the capa-

bility of the SP620.

3. Never use the SP620 to measure liquid pressure.

4. Do not expose the unit to damp environments for extended periods of

time.

C. SPECIFICATIONS

D. INSTRUMENT OVERVIEW

1. Input connection for pressure measurements. Inputs are

marked + and -.

2. SP620 status LED indicator.

Orange and blinking = Bluetooth not connected

Green and blinking = Bluetooth connected

Blinking Red with either of the above = Low battery

3. Power Key. Press and hold to turn the instrument on.

Press and hold to turn the instrument off.

4. Built-in magnet. Attach to

metal surfaces for hands free

operation. Ensure surface is

not hot.

5. Serial number location. Last

three digits are the product

identification number and

marked in bold. Use this num-

ber to distinguish between

models when several SP620’s

are connected to a phone or

tablet.

6. Screw to open battery com-

partment. Turn the screw

counter clockwise until it is

just above the compartment

door. Lift on the screw to open

the compartment.

The inputs are marked + and -. Any pres-

sure connected to the - port will be sub-

tracted from the + port. For standard pres-

sure / vacuum measurements use the +

port only. Use the + and - port when per-

forming differential measurements.

E. TAKING AMEASUREMENT

1. Download and install the TPI

Smart Probe App onto your

mobile device. Run the App. The

“Main-Real Time” screen will be

displayed.

The App will say “No Devices”

until a smart probe has been

connected.

2. Press and hold the SP620 On/Off

key down until it turns on. The

LED indicator will initially be

orange and blink.

The SP620 will auto connect to

your mobile device. The LED

indicator will turn Green and

blink to indicate a link has been

established. The App will display

the model and ID number of the

smart probe connected.

If the SP620 does not auto con-

nect tap refresh on the App.

Refresh

This also clears any data

accumulated.

Displays the measured

pressure.

3. Tapping the list icon allows

optional functions to be

accessed. These include

Show/Hide, Unit, and Zeroing

Sensors.

Set the units of measure at this

time.

Show/Hide : Allows a device

to be seen or hidden. Useful

when multiple devices are

connected.

Unit : Switch between units

of pressure.

Zeroing Sensors: Used to

zero the SP620. (See page

TAKING AMEASUREMENT (continued)

7. Tap the Reset icon to set the pressure reading to 0 (+/- 0.05

counts)

8. Tap Close to return to normal operation.

4. Connect tubing to the SP620. For a standard measurement

connect tubing to the + port and leave the - port open. For a

differential measurement connect tubing to the + and - ports.

5. Tap the list icon to bring up the options menu.

6. Select “Zeroing Sensors” to bring up the field calibration

screen.

7. Tap the + icon to select the SP620 to be zeroed.

8. Tap the SP620 to be zeroed.

9. Connect the tube(s) to the device under test and read the

pressure. Examples are:

Pressure: + port - Port Displayed Rdg

10inH2O Open 10inH2O

-10inH2O Open -10inH2O

10inH2O 5inH2O 5inH2O

10inH2O 25inH20 -15inH2O

F. ADDITIONAL APP FEATURES

1. Tapping “Graph” switches the

display to graph mode. The tem-

perature will be displayed as a

line graph.

If multiple SP620’s are being

used, each will have a different

color in the App.

2. Tapping “Data” switches the dis-

play to show the measured data

in a list format.

Each reading in the list will be

dated and time stamped.

Tap “Data”.

The measurement data is

shown in a list with a date

and time stamp.

Tapping the Refresh icon

clears this data.

Tap the mail icon.

Test data will be exported in

a CSV file via email.

Company Name : Test Products Intl

Company Address : 9615 SW Allen Blvd

Customer Name : Sample Customer

Customer Address : 1111 Sample Way

Building Name : Bldg 3

Building Address : 1222 Sample Ave

Date Time SP620-007(inH2O)

5/7/2018 11:44:01 20.55

5/7/2018 11:43:59 20.74

5/7/2018 11:43:57 20.61

5/7/2018 11:43:55 21.03

5/7/2018 11:43:53 21.13

5/7/2018 11:43:51 21.4

4. Exported data in the CSV file dis-

play with the date and time

stamp.

If a company and customer name

has been entered they will be

exported too. See page 5 for set-

ting up the customer and compa-

ny name.

Tap “Graph”.

Each SP620 is displayed in a

different color in the line

graph.

3. Tapping the mail icon enables

test data to be exported in a CSV

file via email.

G. DROP DOWN MENU

1. Tap the Drop Down Menu icon to access additional features.

Main - Real Time: Tapping this returns you to the main screen.

Select Application: Tapping this pulls up sub applications for

variious smart probes. These include Temperature differential

(SP341), Air Volume Calulation (SP565), and Tightness Test

(SP620). Note: There are no sub applications for the SP1000.

Company Info: Allows you to enter your information to show up

on the CSV file report. You can enter your company name,

address, and email.

Customer Info: Allows you to enter the information of the cus-

tomer the tests are being performed for. You can enter the cus-

tomer name, address, and email. You can also enter the building

information in cases where the tests are being performed some-

where off-site from the customer.

Exit: Closes the Smart Probe App.

The Smart Probe App has a Drop Down menu allowing access to additional app features.

H. ENTERING COMPANY AND CUSTOMER INFORMATION

1. Tap the Drop Down Menu icon to access additional features.

2. Select “Company Info” to enter your information to show up on

the CSV file report. You can enter your company name, address,

and email.

3. Select “Customer Info” to enter the information of the customer

the tests are being performed for. You can enter the customer

name, address, and email. You can also enter the building infor-

mation in cases where the tests are being performed some-

where off-site from the customer.

The Smart Probe App allows you to enter your company information and the customer

information who the test is being performed for. This information will be exported in the

CSV file (see page 4).

I. PERFORMING TIGHTNESS TEST

1. Tap the Drop

Down Menu icon

to access addi-

tional features.

The SP620 and smart probe app provide the capability of performing a standing pressure

or Tightness Test/. This test is mostly used in Europe and is a way to check for leaks in

sealed systems.

2. Tap “Select

Application”.

3. Select “Tightness

Test”.

Note: The other

applications shown

are for different

model smart probes

and do not work

with the SP620.

4. Tap the + icon

to select the

SP620 to use

for the meas-

urement.

Tap the SP620

being used.

PERFORMING TIGHTNESS TEST (cont)

5. Pressure P2 will be

displayed.

Tap the list icon to

access the optional

menu.

Tap on Tightness

Test Setting.

6. Tap the list icon to

access the option-

al menu.

Tap on Zeroing

Sensors

7. The tightness Test

settings menu will

display.

Set the alarm point

for the maximum

allowable drop from

the starting pres-

sure.

Set the stabilization

time. This is the

time prior to the

clock starting to

give the pressure

reading time to

become steady.

Set the test time.

Select whether the

alarm should

vibrate.

Tap Apply and

Close.

8. Tap the + icon to

select the SP620

to be zeroed.

Tap the SP620 to

be zeroed.

Tap the Reset icon

to set the pres-

sure reading to 0

(+/- 0.05 counts)

Tap Close to

return to normal

operation.

Autres manuels pour SP620

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur