Torrey WLS Manuel utilisateur
WLS Scale
WLS Network Installation Guide Rev. 1.0
Windows 7 / Windows 8
I. Requirements Network.
For optimum performance connect the computer with one Ethernet cable and
the Wifi scales into a distance not greater than 50 feet from the Access Point Router
Linksys E1200 (Torrey Part No. 11900171).
II. Equipment.
-WLS scale.
-Personal Computer with Windows 7 or Windows 8.
-2 Ethernet Network Cable, Category 5.
-Router Access Point Linksys E1200 (Torrey Part No. 11900171).
-Internet connection.
III. Access Point / Router Configuration.
This procedure was performed using an Access Point Linksys E1200 (Torrey Part
# 11900171) has not been previously configured and a personal computer with
network card configuration-DHCP Client. In case your personal computer or access
point has a different configuration, consult the person who made the configuration
before proceeding.
a) Connect the network cable to the PC at one of the Ethernet ports on the
router. If you have an Internet connecting a network cable to the Internet
port.
b) Connect the power supplier to the Router to turn it on.
c) Enter in your computer, the CD-ROM that came with your Linksys Router.
d) After reading the CD-ROM the following window appears, select the Install or
Run from media.
e) The Router Configuration program opens the next window, mark the
checkbox to accept terms and press Next button.
f) Check the connection is accorded to the below image and press the Next
button.
g) Make sure the connection is correct according to the image and press the
Next button.
h) Then the Router asked to define the name and password of your wireless
network. Set the parameters and press the Next button.
Router name (SSID): MyRouterWLS
Password: 12345678
i) The Router will start to configure the wireless network, follow the
instructions at the end to close the program.
Internet
1
2
3
IV. WLS Scale Wifi Connection.
This procedure was performed using a scale with WLS factory settings.
Perform the following steps directly on the screen of scale WLS.
a) In the home screen press the Menu button.
b) Select Settings.
c) The scale asks for the configuration password, the default password at
WLS scale with a factory setting is 123456.
d) Find the icon for Connectivity and push it.
e) Select the Wifi option.
f) Select the Enable Wireless option. The scale scans for available
networks to connect.
g) Select MyWLSRouter option.
h) The scale asks for the password of the network, type 12345678.
i) Select the Advanced option.
j) Set the following parameters.
Static IP Address
IP Address 192.168.1.51
Subnet Mask 255.255.255.0
Gateway 192.168.1.1
Press Save to save the changes and exit to return to the previous
window. Your WLS scale is ready to communicate over a Wifi connection.
V. WLS ADMIN Software.
Download the software from http://www.basculas-torrey.com/modelo-
wls.php. When it is installed follow the steps below.
a) Type at user Admin without password.
b) In the software menu selection Scales.
c) Select the option New Scale.
d) Enter a name for the scale.
e) Enter a description for the scale.
f) Set a connection type.
g) Enter a valid IP address 192.168.1.51 for the Scale.
h) Press the Connect button.
i) The scale must successfully respond.
j) Press the Save button.
k) The scale has been installed successfully. Repeat V step for all other
WLS scales that you want to connect to the PC.
For more information visit our website www.basculas-torrey.com or
contact Technical Support by phone (0181 ) 8198-1014.
6
5
4
Autres manuels Torrey Échelle
Torrey
Torrey LSQ-40L Manuel d'instructions
Torrey
Torrey EQB-W Series Manuel utilisateur
Torrey
Torrey CRS Series Manuel utilisateur
Torrey
Torrey W-LABEL Series Manuel utilisateur
Torrey
Torrey QC Series Manuel utilisateur
Torrey
Torrey CRS-HD 200 Manuel utilisateur
Torrey
Torrey PS Series Manuel utilisateur
Torrey
Torrey W-LABEL 40L Manuel utilisateur
Torrey
Torrey QC Series Manuel utilisateur
Torrey
Torrey LSQ Series Manuel utilisateur
Torrey
Torrey PC Series Manuel utilisateur
Torrey
Torrey EQB-50/100 Manuel utilisateur
Torrey
Torrey FS 250/500 Manuel utilisateur
Torrey
Torrey PPC Series Manuel utilisateur
Torrey
Torrey L-EQ HS Series Manuel utilisateur
Torrey
Torrey WLS SERIES Manuel utilisateur
Torrey
Torrey LPC HS Series Manuel utilisateur
Torrey
Torrey L-EQ 5/10 Manuel utilisateur
Torrey
Torrey LSQ Series Manuel utilisateur
Torrey
Torrey CRS Series Manuel utilisateur
