9
EASY OPERATION
COUNT MODE
1.PRESS THE , KEY.
2.USE THE NUMERIC KEYS TO ENTER THE WEIGHT PER UNIT OF THE PIECE (UNIT WEIGHT).
3. PRESS THE KEY.
THE QUANTITY OF PIECES IS AUTOMATICALLY CALCULATED AND IT IS DISPLAYED ON THE COUNT pcs.
SECTION. IF YOU DO NOT KNOW THE EXACT UNIT WEIGHT YOU MAY USE THE SAMPLE FUNCTION AND START
COUNTING AFTER PRESSING ENTER.
YOU CAN COUNT UP TO A MAXIMUM OF 999,999 PIECES. WHEN IT IS EXCEDING THIS QUANTITY THE TOTAL
OF PIECES DISPLAYED WILL BE 0. WHEN REMOVING THE EXCESS OF PIECES THE TOTAL WILL DISPLAY
AGAIN THE CORRECT QUANTITY OF PIECES.
SAMPLE MODE
YOU CAN USE THIS MODE TO CALCULATE THE UNIT WEIGHT OF ONE PIECE OF THE LOT YOU WANT TO
COUNT.
1. PRESS THE KEY. THE MAXIMUM UNIT WEIGHT TO CALCULATE IS 9999.9 gr. ; 9999.9 lb.
2. WHEN OPERATING THE SCALE IN kg. THE UNIT WEIGHT WILL BE CALCULATED IN gr. THE NUMBER OF
PIECES OF THE SAMPLE DEPENDS ON THE UNIT WEIGHT. TO CALCULATE THE UNIT WEIGHT OF A PIECE,
PLACE 10 PIECES ON THE PLATE AND DIVIDE BY 10 THE DISPLAYED TOTAL WEIGHT. THEN, CHECK FROM THE
TABLES OF ERRORS THE MINIMUM NECESSARY QUANTITY OF PIECES FOR THE SAMPLE TO GET A CLOSER
UNIT WEIGHT.
3. PLACE ON THE PLATE THE NECESSARY QUANTITY OF PIECES AND USE THE NUMERIC KEYS TO ENTER
THE NUMBER OF PIECES OF THE SAMPLE. THE UNIT WEIGHT IS AUTOMATICALLY CALCULATED AND
DISPLAYED ON THE UNIT WEIGHT DISPLAY. YOU WILL BE ABLE TO START COUNTING WITH THIS CELL BY
PRESSING THE KEY. TO COUNT USING A REMOTE CELL YOU SHOULD PRESS LOCAL/REMOTE AFTER
PRESSING THE ENTER KEY. YOU CAN STORE THE UNIT WEIGHT VALUE IN A MEMORY TO USE IT LATER.
FOR EXAMPLE: LET´S SUPPOSE THAT WE SHALL WEIGHT SCREWS AND THE UNIT WEIGHT IS
APPROXIMATELY 3.6gr. FROM THE TABLE OF ERRORS WE KNOW TO GET THE MINIMUM ERROR WE SHOULD
TAKE AT LEAST 100 PIECES FOR THE SAMPLE. WE PRESS THE KEY, WE PLACE THE 100 SCREWS
AND WE ENTER 100 USING THE NUMERIC KEYS. THE UNIT WEIGHT IS CALCULATED AND DISPLAYED. NOW
PRESS THE KEY AND PLACE THE LOT OF SCREWS TO BE COUNTED, THE QUANTITY OF SCREWS IS
DISPLAYED ON THE COUNT pcs DISPLAY. IF HIGH PRECISION COUNTING IS NOT REQUIRED YOU MAY USE A
SAMPLE OF 25 TO 50 PIECES FOR THIS EXAMPLE BUT, THE PERCENTAGE OF ERROR WILL INCREASE
ACCORDING TO THE TABLE OF MAXIMUM ERRORS.
