Tork Elevation H2 Xpress Instructions de construction

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

1 of 8

Tork Elevation H2 Xpress Interfold Towel

Dispenser (360 capacity):

H2 Xpress System: 552020 (white)

H2 Xpress System: 552028 (black)

Dispenser Dimensions HxWxD Inches (cm):

17.5 x 11.9 x 4.0 (44.4x 30.2 x 10.1 cm)

H2 Xpress Towel Product Options:

100297 (Tork Premium, 4 Panel)

101290 (Tork Advanced, 4 Panel)

101291 (Tork Advanced, 3 Panel)

Parts

Part Description Replacement SKU

Part Description with Replacement Instructions

Parts with SKUs listed are available for order as of the revision date on the manual. Contact an SCA

Sales Representative or the SCA Tissue Quality Coordinator to order these parts.

If no SKU is listed, the availability of the part is unknown. Please contact the SCA Tissue Quality

Coordinator for more information (see Contacting SCA section).

Replacement SKU Description & Replacement Instructions

225520A

225521A

H2 ELEVATION HOOD (White or Black)

The hood for the 552020 or 552028 can be removed without any tools. Open the

cover. Start at the bottom hinge. Push hinge pivot on cover up to disengage from

back. Once bottom hinge is free, top hinge can then be pushed over rib and cover

can be removed.

205502

205503

ELEVATION LOCK (White or Black)

The lock can be replaced by pressing the plastic tabs on each side to free the lock

from the opening. A new lock can be snapped in place.

200260 KEY SCA 200260 KEY FOR ALL TORK DISPENSERS

H2 ELEV HOOD (White) 225520A

H2 ELEV HOOD (Black) 225521A

ELEVATION LOCK

(White)

205502

ELEVATION LOCK

(Black)

205503

200260 KEY FOR ALL

TORK DISPENSERS

200260 KEY

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

2 of 8

Mounting and Filling Instructions

Installation instruction sheet and mounting template are provided inside each carton.

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

3 of 8

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

4 of 8

Preventive Maintenance

The dispenser should be cleaned any time there is heavy paper dust build-up inside the dispenser. If

paper dust is not a problem, approximately every year is a good frequency for cleanings. The following is

the recommended procedure to cleaning:

1) Open the dispenser and remove the remaining towels.

2) Clean out any paper dust. This can be done is several ways, such as, vacuuming, blowing out with a

can of compressed air (wear safety glasses), wiping out with a damp cloth, etc.

3) Clean the cover with a general all-purpose cleaner that is safe for plastics.

Troubleshooting

Problem: Any paper-related problem.

Take note of the date code on the outside of the case of paper product on inside on the TorkSelect label.

Then contact the SCA Tissue Quality Coordinator and explain the problem.

Problem: Any other problem not stated above.

•Contact the SCA Tissue Quality Coordinator.

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

5 of 8

Contacting SCA

To contact the SCA Tissue Quality Coordinator, dial 1-866-722-6659 and press 6. If asked for the date

code on the dispenser, see instructions below.

Product Date Code Location: The assembly date code for the product can be found on the TorkSelect

label affixed to the inside back of the dispenser.

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

6 of 8

552020 552028 - Tork Elevation H2 Xpress Interfold Hand Towel Dispenser

Mounting Hole Dimensions (mm)

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

7 of 8

Recommended Mounting Height (standard access)

Bottom of towel dispenser to be located 47.25” (120cm) above finished floor.

Recommended Mounting Height (ADAAG Guideline)

4.22.7 Controls and Dispensers. If controls, dispensers, receptacles, or other equipment are provided,

then at least one of each shall be on an accessible route and shall comply with 4.27.

4.27.3* Height. The highest operable part of controls, dispensers, receptacles, and other operable

equipment shall be placed within at least one of the reach ranges specified in 4.2.5 and 4.2.6.

4.2.5* Forward Reach. If the clear floor space only allows forward approach to an object, the maximum

high forward reach allowed shall be 48 in (1220 mm) (see Fig. 5(a) )

Figure 5a

High Forward Reach Limit

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

8 of 8

4.2.6* Side Reach. If the clear floor space allows parallel approach by a person in a wheelchair, the

maximum high side reach allowed shall be 54 in (1370 mm) and the low side reach shall be no less than

9 in (230 mm) above the floor (Fig. 6(a) and (b)).

Figure 6(a) Figure 6(b)

Clear Floor Space - Parallel Approach High and Low - Side Reach Limits

Under 4.4.1, the Elevation H2 Xpress dispenser can be located on any wall surface because it protrudes

4” or less. It will comply with ADAAG regulations as long as it is mounted at the appropriate height for the

approach specified above.

Table des matières

Autres manuels Tork Distributeur

Tork

Tork Image Design Matic 460001 Manuel utilisateur

Tork

Tork Matic Manuel utilisateur

Tork

Tork H-7859 Manuel utilisateur

Tork

Tork S4 Intuition Manuel utilisateur

Tork

Tork Image Design 460010 Manuel utilisateur

Tork

Tork Matic Manuel de service

Tork

Tork Essity Image Design 466000 Manuel utilisateur

Tork

Tork Xpressnap N4 System Manuel utilisateur

Tork

Tork 572028A Manuel utilisateur

Tork

Tork Elevation T2 Mini JBT Series Instructions de construction

Tork

Tork 555520A Instructions de construction

Tork

Tork 99A Instructions de construction

Tork

Tork 430690 Manuel utilisateur

Tork

Tork Matic Elevation H1 Manuel utilisateur

Tork

Tork Intuition 5511201 Manuel utilisateur

Tork

Tork Image Design Tork 466100 Manuel utilisateur

Tork

Tork Xpressnap N4 Manuel utilisateur

Tork

Tork Elevation H2 Xpress Mini Instructions de construction

Tork

Tork 93T Mode d’emploi

Tork

Tork Tork Matic 551100 Manuel utilisateur

Tork

Tork Image Design Matic 460001 Manuel utilisateur

Tork

Tork B3 System Instructions de construction

Tork

Tork Xpressnap Cafe N10 Manuel utilisateur

Tork

Tork Matic H1 Instructions de construction

Manuels Distributeur populaires d'autres marques

Silver King

Silver King Majestic SK12MAJ Guide de démarrage rapide

Franke

Franke F3Dn Twin Manuel utilisateur

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Manuel utilisateur

DAN DRYER

DAN DRYER 282 Manuel utilisateur

Essity

Essity Tork 473208 Manuel utilisateur

CBS

CBS SD300BU-88 Guide de configuration

Sealey

Sealey MK77 Manuel utilisateur

Fluid Management

Fluid Management Accutinter 1600 Manuel utilisateur

Franke

Franke DVS SD99-010 Manuel utilisateur

Graco

Graco Dispensit 1053-10C Guide de dépannage

ITALTINTO

ITALTINTO i50 Manuel utilisateur

Coca-Cola

Coca-Cola FREESTYLE 9000 Manuel utilisateur

Graco

Graco ProMix 2KE Mode d’emploi

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 Manuel utilisateur

Wayne

Wayne GLOBAL VISTA CNG Manuel utilisateur

clarsen

clarsen H133 Manuel utilisateur

PicoBrew

PicoBrew Zymatic Manuel utilisateur

BOWMAN

BOWMAN BP-007 Manuel utilisateur