Tork S1 System Instructions de construction

Washroom Dispenser Service and Parts Manual

Tork Elevation Liquid Skincare Dispenser

570020A; 570028A

Revision Date: 3-12-18

1 of

Essity Internal

Tork Elevation Liquid Soap Dispenser:

S1 System: 570020A (white); 570028A (black)

Dispenser Dimensions HxWxD Inches (cm):

11.5 x 4.4 x 4.5 (29.1 x 11.2 x 11.4 cm)

Soap Product Options (1 L bottles):

400011 - Tork Premium Extra Mild Non Perfumed Liquid Soap

400012 - Tork Premium Luxury Soft Liquid Soap

400013 - Tork Premium Hair and Body Liquid Soap

400014 - Tork Premium Antibacterial Liquid Soap

400016 - Tork Premium Alcohol Gel Hand Sanitizer

Dispenser Parts

Part Description Replacement SKU

PUSH BUTTON - WHITE

205602

PUSH BUTTON - BLACK

205603

KEY FOR TORK

DISPENSER

200260 KEY

SOAP PUMP (GREY

CAP & BLACK RUBBER)

252380-02 NEW

ELEVATION LOCK -

WHITE

205502

ELEVATION LOCK -

BLACK

205503

Washroom Dispenser Service and Parts Manual

Tork Elevation Liquid Skincare Dispenser

570020A; 570028A

Revision Date: 3-12-18

2 of

Essity Internal

Part Description with Replacement Instructions

Parts with SKU numbers are available for order as of the revision date on the manual. Contact an

Essity Sales Rep or the Essity Quality Coordinator to order these parts.

Replacement SKU Description & Replacement Instructions

252380-02 NEW

RUBBER PUMP NOZZLE

The rubber pump nozzle screws onto the top of the soap bottles. The nozzle and

soap bottle are then installed into the dispenser. See the Loading Instructions

section for more details.

205602White

205603 Black

PUSH BUTTON (WHITE OR BLACK)

The user presses the pump handle to dispenser soap. Open cover. Press pin on

either side to release from base. Other pin will release easily. Snap new button in

place.

205502White

205503 Black

ELEVATION LOCK (WHITE OR BLACK)

The lock can be replaced by pressing the plastic tabs on each side to free the lock

from the opening.

200260 KEY

METAL KEY FOR TORK DISPENSERS

Mounting and Filling Instructions

Installation instruction sheet and mounting template are provided inside each carton.

3 of

Washroom Dispenser Service and Parts

Manual

Tork Elevation Liquid Skincare

Dispenser

570020A;570028A

Revision Date:

3-12-18

Essity Internal

4 of

Washroom Dispenser Service and Parts

Manual

Tork Elevation Liquid Skincare

Dispenser

570020A;570028A

Revision Date:

3-12-18

Essity Internal

Preventive Maintenance

Clean the cover with a general all-purpose cleaner that is safe for plastics. Do not use abrasives.

Dispenser is not dishwasher safe. Dispenser can be completelydisassembled for cleaning, if necessary.

Troubleshooting

Problem: Soap bottle is collapsing inside dispenser, preventing bottle from completely dispensing.

This is a known issue being caused by the bottle and nozzle attachment being air-tight. Until this

is corrected with a redesign, the recommended method to avoid this problem is to poke a small

hole in the bottle to equalize the pressure inside the bottle. After the bottle and nozzle have been

installed in the dispenser, poke a small hole anywhere above the soap line. The plastic is thinner

on the side of the bottle compared to the bottom of the bottle, so making the hole on the side of

the bottle (somewhere above the soap line) is recommended. Some sort of hand protection (ie.

cutting gloves) is strongly recommended when making the hole.

Problem: Any other problem not stated above.

Contact the Essity Quality Coordinator.

Contacting Essity

To contact the Essity Quality Coordinator, dial 1-866-722-6659and press 6.

Product Date Code Location: The assembly date code for the product can be found on the TorkSelect

label affixed to the inside back of the dispenser.

5 of

Washroom Dispenser Service and Parts Manual

Tork Elevation Liquid Skincare Dispenser

570020A; 570028A

Revision Date: 3-12-18

Essity Internal

570020A –570028ATork Liquid Skincare Dispenser

Mounting Hole Dimensions

(mm)

Alternate Mounting (using double-sided tape)

The dispenser is supplied with double-sided tape as an alternative mounting method.

1. Apply to clean and dry surface

2. Remove protection sheet

3. Press on firmly

4. Wait 30 minutes before loading bottle

6 of

Washroom Dispenser Service and Parts Manual

Tork Elevation Liquid Skincare Dispenser

570020A; 570028A

Revision Date: 3-12-18

Essity Internal

Recommended Mounting Height (standard access)

Mount soap dispenser 6” (15cm) above sink or counter surface.

Recommended Mounting Height (ADAAG Guideline)

Maximum Forward Reach over an Obstruction

The maximum level forward reach over an obstruction with knee space below is 25 inches (635 mm).

When the obstruction is less than 20 inches (510 mm) deep, the maximum high forward reach is 48

inches (1220 mm).When the obstruction projects 20 to 25 inches (510 mm to 635 mm), the maximum

high forward reach is 44 inches (1120 mm). (4.2.5, 4.25.3).

Note: Compliance with ADA guidelines is the responsibilityof the installer and building owner. Local and

state requirements maydiffer from ADAAG guidelines.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tork Distributeur

Tork

Tork 6521281 Instructions de construction

Tork

Tork Elevation H2 Xpress Instructions de construction

Tork

Tork Matic Manuel utilisateur

Tork

Tork H-7859 Manuel utilisateur

Tork

Tork Intuition 5511201 Manuel utilisateur

Tork

Tork Image Design Matic 460001 Manuel utilisateur

Tork

Tork 555520A Instructions de construction

Tork

Tork Matic Manuel de service

Tork

Tork S4 Intuition Manuel utilisateur

Tork

Tork 570020A Instructions de construction

Tork

Tork Image Design 460013 Manuel utilisateur

Tork

Tork Image Design Matic 460001 Manuel utilisateur

Tork

Tork 209303A Instructions de construction

Tork

Tork Express 460004 Manuel utilisateur

Tork

Tork B3 System Instructions de construction

Tork

Tork 461123 Manuel utilisateur

Tork

Tork Tork Matik 551102 Manuel utilisateur

Tork

Tork S2 Manuel utilisateur

Tork

Tork Matic Manuel utilisateur

Tork

Tork W6 Guide de configuration

Tork

Tork 572028A Manuel utilisateur

Tork

Tork Performance Maxi W2 Instructions de construction

Tork

Tork Elevation H2 Xpress Mini Instructions de construction

Tork

Tork Elevation T2 Mini JBT Series Instructions de construction

Manuels Distributeur populaires d'autres marques

Silver King

Silver King Majestic SK12MAJ Guide de démarrage rapide

Franke

Franke F3Dn Twin Manuel utilisateur

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Manuel utilisateur

DAN DRYER

DAN DRYER 282 Manuel utilisateur

Essity

Essity Tork 473208 Manuel utilisateur

CBS

CBS SD300BU-88 Guide de configuration

Sealey

Sealey MK77 Manuel utilisateur

Fluid Management

Fluid Management Accutinter 1600 Manuel utilisateur

Franke

Franke DVS SD99-010 Manuel utilisateur

Graco

Graco Dispensit 1053-10C Guide de dépannage

ITALTINTO

ITALTINTO i50 Manuel utilisateur

Coca-Cola

Coca-Cola FREESTYLE 9000 Manuel utilisateur

Graco

Graco ProMix 2KE Mode d’emploi

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 Manuel utilisateur

Wayne

Wayne GLOBAL VISTA CNG Manuel utilisateur

clarsen

clarsen H133 Manuel utilisateur

PicoBrew

PicoBrew Zymatic Manuel utilisateur

BOWMAN

BOWMAN BP-007 Manuel utilisateur