Texas Instruments THS3061EVM Manuel utilisateur

THS3061EVM

September 2002 High Performance Linear Products

User’s Guide

SLOU145

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,

enhancements, improvements, and other changes to its products and services at any time and to discontinue

any product or service without notice. Customers should obtain the latest relevant information before placing

orders and should verify that such information is current and complete. All products are sold subject to TI’s terms

and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI

deems necessary to support this warranty. Except where mandated by government requirements, testing of all

parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for

their products and applications using TI components. To minimize the risks associated with customer products

and applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,

in which TI products or services are used. Information published by TI regarding third-party products or services

does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.

Use of such information may require a license from a third party under the patents or other intellectual property

of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without

alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction

of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for

such altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that

product or service voids all express and any implied warranties for the associated TI product or service and

is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

EVM IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation kit being sold by TI is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION

PURPOSES ONLY and is not considered by TI to be fit for commercial use. As such, the goods being provided

may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective

considerations, including product safety measures typically found in the end product incorporating the goods.

As a prototype, this product does not fall within the scope of the European Union directive on electromagnetic

compatibility and therefore may not meet the technical requirements of the directive.

Should this evaluation kit not meet the specifications indicated in the EVM User’s Guide, the kit may be returned

within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE

WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,

IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user

indemnifies TI from all claims arising from the handling or use of the goods. Please be aware that the products

received may not be regulatory compliant or agency certified (FCC, UL, CE, etc.). Due to the open construction

of the product, it is the user’s responsibility to take any and all appropriate precautions with regard to electrostatic

discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE

TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not

exclusive.

TI assumes no liability for applications assistance, customer product design, software performance, or

infringement of patents or services described herein.

Please read the EVM User’s Guide and, specifically, the EVM Warnings and Restrictions notice in the EVM

User’s Guide prior to handling the product. This notice contains important safety information about temperatures

and voltages. For further safety concerns, please contact the TI application engineer.

Persons handling the product must have electronics training and observe good laboratory practice standards.

No license is granted under any patent right or other intellectual property right of TI covering or relating to any

machine, process, or combination in which such TI products or services might be or are used.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

EVM WARNINGS AND RESTRICTIONS

It is important to operate this EVM within the specified input and output ranges described in

the EVM User’s Guide. The input supply voltage (VS) should be no greater than 15 V for

dual supply or 30 V for single supply. The differential input signal (VID) should be no greater

than 3 V. The output current (IO) should be no greater than 150 mA.

Exceeding the specified input range may cause unexpected operation and/or irreversible

damage to the EVM. If there are questions concerning the input range, please contact a TI

field representative prior to connecting the input power.

Applying loads outside of the specified output range may result in unintended operation and/or

possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to

connecting any load to the EVM output. If there is uncertainty as to the load specification,

please contact a TI field representative.

During normal operation, some circuit components may have case temperatures greater than

60°C. The EVM is designed to operate properly with certain components above 60°C as long

as the input and output ranges are maintained. These components include but are not limited

to linear regulators, switching transistors, pass transistors, and current sense resistors. These

types of devices can be identified using the EVM schematic located in the EVM User’s Guide.

When placing measurement probes near these devices during operation, please be aware

that these devices may be very warm to the touch.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

Information About Cautions and Warnings

iii

Preface

Read This First

How to Use This Manual

This document contains the following chapters:

-Chapter 1—Introduction and Description

-Chapter 2—Using the THS3061EVM

-Chapter 3—THS3061EVM Applications

-Chapter 4—EVM Hardware Description

Information About Cautions and Warnings

This book may contain cautions and warnings.

This is an example of a caution statement.

A caution statement describes a situation that could potentially

damage your software or equipment.

This is an example of a warning statement.

A warning statement describes a situation that could potentially

cause harm to you.

The information in a caution or a warning is provided for your protection.

Please read each caution and warning carefully.

Trademarks

FCC Warning

This equipment is intended for use in a laboratory test environment only. It gen-

erates, uses, and can radiate radio frequency energy and has not been tested

for compliance with the limits of computing devices pursuant to subpart J of

part 15 of FCC rules, which are designed to provide reasonable protection

against radio frequency interference. Operation of this equipment in other en-

vironments may cause interference with radio communications, in which case

the user at his own expense will be required to take whatever measures may

be required to correct this interference.

This EVM contains components that can potentially be damaged by

electrostatic discharge. Always transport and store the EVM in its

supplied ESD bag when not in use. Handle using an antistatic

wristband. Operate on an antistatic work surface. For more

information on proper handling, refer to SSYA008.

Related Documentation From Texas Instruments

The URLs below are correct as of the date of publication of this manual. Texas

Instruments applications apologizes if they change over time. Go to the TI

website at www.ti.com and search on the literature number (e.g., SLOS394).

-THS3061 data sheet (SLOS394)

-Application report (SLOA069), How (Not) to Decouple High Speed Op

Amp Circuits, http://www-s.ti.com/sc/psheets/sloa069/sloa069.pdf

-Application report (SLMA002), Power Pad Thermally Enhanced Package,

http://www-s.ti.com/sc/psheets/slma004/slma002.pdf

-Application report (SLMA004), Power Pad Made Easy,

http://www-s.ti.com/sc/psheets/slma004/slma004.pdf

-Application report (SSYA008), Electrostatic Discharge (ESD),

http://www-s.ti.com/sc/psheets/ssya008/ssya008.pdf

-High-Speed Amplifier PCB Layout Tips,

http://www-s.ti.com/sc/psheets/sloa102/sloa102.pdf

Trademarks

PowerPAD is a trademark of Texas Instruments.

Contents

1 Introduction and Description 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 Evaluation Schematic 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Using the THS3061EVM 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 THS3061EVM Applications 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1 Inverting Gain Stage 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 Noninverting Gain Stage 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 EVM Hardware Description 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Figures

1-1 Schematic of the Populated Circuit on the EVM (Default Configuration) 1-2. . . . . . . . . . . . . .

2-1 THS3061EVM Interconnection Diagram 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-1 Inverting Gain Stage 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-2 Noninverting Gain Stage 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-1 Board Layout Views for THS3061EVM 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tables

4-1 THS3061EVM Bill of Materials 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1

Introduction and Description

The Texas Instruments THS3061 evaluation module (EVM) helps designers

evaluate the performance of the THS3061 operational amplifier. Also, this

EVM is a good example of high-speed PCB design.

This document details the THS3061EVM. It includes a list of EVM features, a

brief description of the module illustrated with a series of schematic diagrams,

EVM specifications, details on connecting and using the EVM, and a discus-

sion of high-speed amplifier design considerations.

This EVM enables the user to implement various circuits to clarify the available

configurations presented by the schematic of the EVM. The user is not limited

to the circuit configurations presented here. The EVM provides enough hard-

ware hooks that the only limitation should be the creativity of the user.

1.1 Evaluation Schematic

As delivered, the EVM has a fully functional example circuit—just add power

supplies, a signal source, and monitoring instrument. See Figure 1–1 for the

complete (default) EVM schematic showing all component locations. The user

can change the gain by changing the ratios of the feedback and gain resistors

(see the device data sheet for recommended resistor values).

The default configuration is designed to provide for a voltage gain of –1 and

about +2 depending on which input is connected to the signal source. This volt-

age gain is the ratio of the voltage at the output pin of the amplifier (pin 6) to

the voltage at the input at J1 or J2 respectively.

For optimum frequency response and stability at either –1 or +2 gain, a 562-Ω

feedback resistor was chosen for R5. The same value is set for R3 to provide

a gain in the inverting configuration of –1. To match the signal generator source

impedance, R2 is set to 54.9 Ω. This is the closest value, when placed in paral-

lel with R3 (562 Ω) that terminates the inverting input to 50 Ω).

Output series resistor R6 is set to 49.9Ω. This value terminates the output cor-

rectly for connection to a 50-Ωinput device, as shown in the applications de-

scribed in Chapter 3. Setting R7 to 953 Ω loads the amplifier at about 1 kΩ, to

match a high-impedance instrument connected to the output connector J4.

Chapter 1

Evaluation Schematic

1-2

When used as an inverting amplifier in the default configuration connected to

a 50-Ωinput measurement instrument, R7 causes a slight gain error. The total

voltage gain is the negative ratio of the feedback resistor R5 and the gain

resistor R3, times the voltage divider created by R6-R7, and the measurement

device input termination resistance. This gain follows the equation:

VI+–R5

R3 ǒR7 ø50 W

R7 ø50 W)R6Ǔ+–0.475 (1)

When using the default configuration, the noninverting gain of the amplifier is

affected by the same slight gain error, plus the gain error imposed by the invert-

ing input termination resistor R2. The following equation shows the gain for this

situation.

VI+ǒ1)R5

R3 )R2ǓǒR7 ø50 W

R7 ø50 W)R6Ǔ+0.908 (2)

Some components such as C1, C2, C3, C4, C5, C6, TP1, J5, J6, and J7 are

omitted on the application schematics of Chapter 3 for clarity.

Figure 1-1.Schematic of the Populated Circuit on the EVM (Default Configuration)

TP1

*Device not installed

Vin-J4

Vout

Vin+

THS3061

J7J5

+C2 -VS

+VS(IN)

FB2

-VS(IN)

FB1

+VS

U1A C4

100 pF C3

+VS

-VS

562 W

0.1 mF

562 W

54.9 W49.9 W

953 W

0.1 mF

100 pF

49.9 W

22 mF

2-1

Using the THS3061 EVM

This section shows how to connect the THS3061EVM to test equipment. It is

recommended that the user connect the EVM as shown in this section to avoid

damage to the EVM or the THS3061 installed on the board.

Figure 2-1.THS3061EVM Interconnection Diagram

Figure 2-1 shows the connections to measure the output while a signal is in-

serted into EVM’s noninverting input. For an inverting signal path, the signal

source can be connected to J1 instead.

Chapter 2

Table des matières

Autres manuels Texas Instruments Unité de contrôle

Texas Instruments

Texas Instruments bq25600 Manuel utilisateur

Texas Instruments

Texas Instruments BOOSTXL-CAPKEYPAD Manuel utilisateur

Texas Instruments

Texas Instruments ADC DJ 00RF Series Manuel utilisateur

Texas Instruments

Texas Instruments DAC90 EVM Series Manuel utilisateur

Texas Instruments

Texas Instruments AM437x Manuel utilisateur

Texas Instruments

Texas Instruments bq24165 Manuel utilisateur

Texas Instruments

Texas Instruments AFE5818 Manuel utilisateur

Texas Instruments

Texas Instruments LMK00725EVM Manuel utilisateur

Texas Instruments

Texas Instruments AFE79 Series Instructions de montage

Texas Instruments

Texas Instruments BQ25180 Manuel utilisateur

Texas Instruments

Texas Instruments LM76005QEVM Manuel utilisateur

Texas Instruments

Texas Instruments TRF7963A Manuel utilisateur

Texas Instruments

Texas Instruments TPA0152 Manuel utilisateur

Texas Instruments

Texas Instruments TMS320C6748 Manuel utilisateur

Texas Instruments

Texas Instruments TPS54521EVM-607 Manuel utilisateur

Texas Instruments

Texas Instruments TLC5540 Manuel utilisateur

Texas Instruments

Texas Instruments TMS320TCI648 Series Manuel utilisateur

Texas Instruments

Texas Instruments TPS630702EVM Manuel utilisateur

Texas Instruments

Texas Instruments TPA3251 Manuel utilisateur

Texas Instruments

Texas Instruments LM5066I EVM Manuel utilisateur

Texas Instruments

Texas Instruments UCC27423-Q1 Manuel utilisateur

Texas Instruments

Texas Instruments TMDS64DC01EVM Manuel utilisateur

Texas Instruments

Texas Instruments TPS65253 Manuel utilisateur

Texas Instruments

Texas Instruments TRF7970A BoosterPack Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur