Texas Instruments THS1030/31EVM Manuel utilisateur

THS1030/31EVM Evaluation

Module for the

THS1030/THS1031 10ĆBit

ADC

2000 AAP Data Conversion

User’s Guide

SLAU040

IMPORTANT NOTICE

TexasInstruments andits subsidiaries(TI) reservethe rightto makechanges totheir productsor todiscontinue

any product or service without notice, and advise customers to obtain the latest version of relevant information

to verify, before placing orders, that information being relied on is current and complete. All products are sold

subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those

pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent

TIdeemsnecessarytosupport thiswarranty. Specifictestingofallparameters ofeachdevice isnotnecessarily

performed, except those mandated by government requirements.

CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF

DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL

APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR

WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER

CRITICALAPPLICATIONS.INCLUSIONOFTIPRODUCTSINSUCHAPPLICATIONSISUNDERSTOODTO

BE FULLY AT THE CUSTOMER’S RISK.

In order to minimize risks associated with the customer’s applications, adequate design and operating

safeguards must be provided by the customer to minimize inherent or procedural hazards.

TIassumes noliabilityforapplicationsassistance orcustomer productdesign. TIdoes notwarrantorrepresent

thatanylicense,eitherexpressorimplied,isgrantedunderanypatentright,copyright,maskworkright,orother

intellectual property right of TI covering or relating to any combination, machine, or process in which such

semiconductor products or services might be or are used. TI’s publication of information regarding any third

party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.

How to Use This Manual

iii

Read This First

Preface

Read This First

About This Manual

This manual describes the physical characteristics, functions, modes of op-

eration, and configuration of the THS1030/31EVM evaluation module (EVM).

How to Use This Manual

Chapter 1 – Overview

Chapter 2 – Physical Description

Chapter 3 – Circuit Description

Chapter 4 – Modes of Operation

Running Title—Attribute Reference

Chapter Title—Attribute Reference

Contents

1 Overview 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 Purpose 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 EVM Basic Functions 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Power Requirements 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 THS1030/31EVM Operational Procedure 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Physical Description 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1 PCB Layout 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Parts LIst 2-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 Circuit Description 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1 Schematic Diagram 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 Circuit Function 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2.1 Inputs 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2.2 Clock Options 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2.3 References 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2.4 Power 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2.5 Outputs 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2.6 THS1031 Register Write 3-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 Modes of Operation 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Running Title—Attribute Reference

Figures

2–1 Silk Top 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–2 Silk Bottom 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–3 Top 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–4 Inner 1 2-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–5 Inner 2 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–6 Bottom 2-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–1 EVM Schematic Diagram 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–2 EVM Schematic Diagram – DIPS 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–3 EVM Schematic Diagram – LOGIC 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–4 EVM Schematic Diagram – THS1031 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–5 EVM Schematic Diagram – POWER_&_REF 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4–1 Common Mode Input VREF/2 – 1Vp-p Input Span (top/bottom mode) 4-2. . . . . . . . . . . . . . . .

4–2 Common Mode Input VREF/2 – 2Vp-p Input Span (top/bottom mode) 4-2. . . . . . . . . . . . . . . .

4–3 External Common Mode Input – 1Vp-p Input Span (center span mode) 4-3. . . . . . . . . . . . . .

4–4 External Common Mode Input – 2Vp-p Input Span (center span mode) 4-3. . . . . . . . . . . . . .

4–5 Differential Input – 1Vp-p Input Span (differential input mode) 4-4. . . . . . . . . . . . . . . . . . . . . . .

4–6 Differential Input – 2Vp-p Input Span (differential input mode) 4-4. . . . . . . . . . . . . . . . . . . . . . .

4–7 External Reference – Input Span and Bias Set by on Board Reference Circuit

(potentiometer P2 sets EXT_T, potentiometer P3 sets EXT_B)

4-5. . . . . . . . . . . . . . . .

Running Title—Attribute Reference

vii

Contents

Tables

2–1 Parts List 2-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–1 Output Connector J4 3-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4–1 Board Jumper Settings for Various Modes of Operation 4-6. . . . . . . . . . . . . . . . . . . . . . . . . . . .

4–2 Jumper Settings for Clock Options 4-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

viii

1-1

Overview

This chapter gives a general overview of the THS1030/31EVM evaluation

module (EVM), and describes some of the factors that must be considered in

using this module.

Topic Page

1.1 Purpose 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 EVM Basic Functions 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Power Requirements 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 THS1030/31 Operational Procedure 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 1

Purpose

1-2

1.1 Purpose

The THS1030/31EVM evaluation module (EVM) provides a platform for

evaluation of the THS1030 and THS1031 10-bit analog-to-digital converters

(ADC) under various signal, reference, and supply conditions. Unless stated

explicitly, the functionality described in this user’s guide applies to both

THS1030 and THS1031 devices.

1.2 EVM Basic Functions

Analog input to the THS1030/31 is provided via an external SMA connector.

The input can be configured onboard to be ac, dc, or transformer coupled to

the input of the device.

An external SMA connector is provided on the THS1031 for the clamp input.

This allows external digital control of the ADC’s clamping function. The ADC

can be clamped to either the device reference or to ground via an onboard

jumper.

The EVM provides an external SMA connection for ADC clock input. This can

be configured to be either ac or dc coupled. Space is reserved on the board

for a crystal oscillator to perform this function, and can be populated when re-

quired.

In addition to the internal reference from the THS1030/31 device, options are

providedontheEVMtoallowadjustmentoftheADCreferenceviaanonboard

reference circuit.

Output from the EVM is via a 40-pin header connector. The digital lines from

the THS1030/31 are buffered using the SN74LVCC4245A before going to the

header.ThisallowstheTHS1030/31suppliestobevariedwithoutaffectingthe

output signal levels.

Power connections to the EVM are via 4-mm banana sockets. Separate input

connectors are provided for the analog and digital supply to the device, and

for the reference and output buffer circuits.

The THS1031 has a number of programmable registers that can be pro-

grammed using DIL switches on the EVM.

1.3 Power Requirements

TheEVMhas4dc-powersupplyconnections:5Vfortheoutputbuffers,2.7 V

to 5 V for the analog and digital supplies to the ADC, and 2.7 V to 5 V for the

referencecircuit.Eachofthesesuppliesisindependent,butitshouldbenoted

thattheinputthresholdsoftheADCwillvarydependentonthedigitalandana-

log supply voltages, as per the datasheet specification.

Table des matières

Autres manuels Texas Instruments Unité de contrôle

Texas Instruments

Texas Instruments TUSB320-LA-EVM Manuel utilisateur

Texas Instruments

Texas Instruments AN-2166 LMZ10500 Manuel utilisateur

Texas Instruments

Texas Instruments AWR1443 Manuel utilisateur

Texas Instruments

Texas Instruments TPS2398EBM Manuel utilisateur

Texas Instruments

Texas Instruments bq34210-Q1 Manuel du produit

Texas Instruments

Texas Instruments TCA7408EVM Manuel utilisateur

Texas Instruments

Texas Instruments MCF8316AEVM Manuel utilisateur

Texas Instruments

Texas Instruments TAS5755MEVM Manuel utilisateur

Texas Instruments

Texas Instruments SimpleLink CC2652PSIP Manuel utilisateur

Texas Instruments

Texas Instruments ISO7220 Series Manuel utilisateur

Texas Instruments

Texas Instruments TPS546C23 Manuel utilisateur

Texas Instruments

Texas Instruments 2000 series Manuel utilisateur

Texas Instruments

Texas Instruments TPS7A78EVM-011 Manuel utilisateur

Texas Instruments

Texas Instruments BQ24260EVM-611 Manuel utilisateur

Texas Instruments

Texas Instruments WiLink WL 1MOD Series Manuel utilisateur

Texas Instruments

Texas Instruments SimpleLink Wi-Fi BoosterPack CC3120 Manuel utilisateur

Texas Instruments

Texas Instruments TMS320C6748 Manuel utilisateur

Texas Instruments

Texas Instruments LMK04832EVM-CVAL Manuel utilisateur

Texas Instruments

Texas Instruments ADS8353-Q1 Manuel utilisateur

Texas Instruments

Texas Instruments TLV320DAC26EVM Manuel utilisateur

Texas Instruments

Texas Instruments AM263P Series Manuel utilisateur

Texas Instruments

Texas Instruments 2000 series Manuel utilisateur

Texas Instruments

Texas Instruments INA260 Manuel utilisateur

Texas Instruments

Texas Instruments TCAN1046V Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur