Tektronix Phaser 220e Manuel d'installation et d'exploitation

1994 b

Tektronix, Inc. All ri

hts reserved. 063-1442-AB

Instruction Sheet

4681FXI Ð Upgrading a Phaser 220e to

a Phaser 220i

This instruction sheet provides the details for replacing a Phaser 220e's image processor board and I/O

board with a 220i image processor board and I/O board. After installing the upgrade you must return

the 220e image processor board and its I/O board to Tektronix.

Static precautions

■

Leave the printer plugged into its power outlet. This preserves a

ground path for static discharges.

■

Touch the printer's bare metal frame often to discharge static

electricity from your body.

■

Handle the circuit board(s) by their edges only.

■

Do not

lay the board(s) on a metal surface.

■

Make the least possible movements to avoid generating static

electricity.

■

Avoid wearing nylon or polyester clothing; they generate static

electricity.

Tools required

■

#1 POSIDRIV¨ screwdriver

■

Antimstatic mat 006-7056-00

Phaserª 220e

4681FXI Ð Upgrading a Phaser 220e to a Phaser 220i

Power down the printer. Leave the power cord plugged in to provide

a ground path for static discharges. Remove the interface cables.

Remove the top-rear and rear plastic cabinet panels.

Remove the screws securing the I/O board (and its metal rear panel

plate)to the card cage.

Disconnect the I/O board's ribbon cable. Remove and save the I/O

board (and rear plate) to return to Tektronix.

I/O board

4681FXI Ð Upgrading a Phaser 220e to a Phaser 220i

Remove the card cage top (3 screws).

Flip over the hinged card cage top.

Lift out the 220e image processor board. Save the board to return to

Tektronix.

8699

4681FXI Ð Upgrading a Phaser 220e to a Phaser 220i

If installed, remove the RAM SIMM installed in J6 of the 220e image

processor board.

If you removed a RAM SIMM from the 220e image processor board in

Step 8, insert it in the 220i image processor board's connector J6 (or in

J7 if J6 is already Þlled) (

), and tilt the module upright until it locks in

place (

When properly inserted, a tab on each end of the connector slips into a

hole on each end of the RAM SIMM. Also, a pawl on each end of the

connector latches around each end of the RAM SIMM to lock it in

place.

10.

Repeat Step 9 to install an additional memory module in J7 if a second

SIMM is available.

11.

Install the 220i image processor board in the card cage. Close and

secure the card cage top.

12.

Install the Phaser 220i's I/O board. Be sure to plug in its two I/O

cables to the image processor board.

13.

After you install this upgrade kit, be sure to afÞx the F-kit upgrade

serial number sticker to the printer. Attach the sticker to the right of

the existing printer serial number.

14.

Close and secure the card cage top. Reinstall the rear cabinet panels.

15.

Reconnect the host interface cables. Turn on the printer and make a

print.

8699-65

RAM

SIMMs

J6 J7

4681FXI Ð Upgrading a Phaser 220e to a Phaser 220i

Return the 220e image processor and I/O boards to Tektronix

Pack the 220e image processor board in the antistatic bag that the 220i

image processor board was shipped in.

Place the packed image processor board inside the shipping box.

Pack the old I/O board in the antistatic bag the that new I/O board

was shipped in.

Place the packed I/O board inside the shipping box.

Mail the package to Tektronix:

Mailing in the USA:

■

Write the printer's serial number on the U.S.A shipping return label that

was included with the upgrade kit.

■

Attach the self-adhesive shipping label to the box.

■

Secure the box closed with heavy-duty shipping tape and mail to the

pre-addressed location. Postage is prepaid.

Mailing outside the USA:

■

Write the printer's serial number on the international shipping return

label that was included with the upgrade kit.

■

Attached the self-adhesive shipping label to the box.

■

Write the printer's serial number on the international shipping return

label.

■

Secure the box closed with heavy-duty shipping tape and ship the box

to Tektronix using your respective country's shipping method.

Autres manuels pour Phaser 220e

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tektronix Imprimante

Tektronix

Tektronix Phaser 360 Manuel utilisateur

Tektronix

Tektronix Phaser 560 Manuel utilisateur

Tektronix

Tektronix Phaser 360 Manuel

Tektronix

Tektronix Z780N - Phaser 780 Color Laser Printer Manuel utilisateur

Tektronix

Tektronix Phaser 600 Manuel utilisateur

Tektronix

Tektronix Z740/N - Phaser 740 Color Laser Printer Instructions de montage

Tektronix

Tektronix Phaser 300X Manuel utilisateur

Tektronix

Tektronix Phaser 850 Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Tektronix

Tektronix Phaser 340 Instructions d'installation et d'utilisation

Tektronix

Tektronix PHASER 7300 Guide de référence

Tektronix

Tektronix Phaser 780 Color Manuel

Tektronix

Tektronix Phaser 840 Manuel de programmation

Tektronix

Tektronix Z740/N - Phaser 740 Color Laser Printer Manuel utilisateur

Tektronix

Tektronix Phaser 540 Manuel utilisateur

Tektronix

Tektronix Z850 Mode d’emploi

Tektronix

Tektronix Phaser 850 Manuel du propriétaire

Tektronix

Tektronix Phaser 550 Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Tektronix

Tektronix Phaser 540 Manuel utilisateur

Tektronix

Tektronix DocuPrint 850 Manuel utilisateur

Tektronix

Tektronix PHASER 240 Manuel utilisateur

Tektronix

Tektronix Phaser 600 Manuel utilisateur

Tektronix

Tektronix Phaser 750DX Manuel

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur