Tektronix WVR5000 Instructions de montage

The Tektronix "TandemVu" Display for Camera Set Up

Figure 1: TandemVu display for Camera Set Up

Operators often like to view the luma (Y) and chroma (C) at the same time so that they can adjust

the camera levels to ensure that the flesh tones of the onscreen camera talent are at the

appropriate video level and the vectorscope shows appropriate hue and saturation.

Within the Tektronix WFM5200 and other 5000 Series instruments, the TandemVu display was

developed to allow you to see the maximum waveform and vector displays simultaneously.

The overlay of waveform and vector displays can be configured in a variety of ways to suit your

needs. For adjustment of a camera, a useful setup is to show the luma Y channel in a 2 line sweep

display with the waveform trace moved to the far left so that only one line is displayed. The vector

display can then be moved to the far right of the display as shown in Figure 1. In this display

configuration, you can easily see adjustments that need to be made to the camera for both the

luma level and chroma signal within the same display.

This Tips and Tricks

relates to the

WFM/WVR 4000/5000

and 5200 Series of

Waveform Monitors

and Rasterizers for

Camera Set Up

applications.

7/2014©Tektronix.Allrightsreserved.25W‐30459‐1

Procedure:

1. Push and hold the Main button to enable WFM & VEC mode.

a. Ensure the display is in full screen mode using the Display Select button.

2. Select the Waveform mode, and push and hold this WFM button to enter the menu.

a. Then ensure display type of YPbPr is selected and deselect the Pb and Pr components

to keep only the Y component displayed.

3. In the “Sweep” menu - push and hold the sweep button and choose the Overlay mode then

2-line sweep can be selected.

a. Move trace to the left (as shown in Figure 1) to keep only one line of the waveform

displayed.

4. Now select the 'Vector button and push and hold to bring up the menu and select the display

type (Vector or Lightning).

a. Use the H and V position control to adjust the vector display to the right of the screen.

Note:

Saving this configuration as a preset will allow easy and quick access to this display.

In the 'Sweep' function modes, Line '2' and '2 Field' only work in 'Overlay' mode

You can of course change all of the color display settings within the configuration menu.

.

The Tektronix "TandemVu" Display for Camera Set Up

Ce manuel convient aux modèles suivants

11

Autres manuels Tektronix Instrument de mesure

Tektronix

Tektronix TCP312 Manuel utilisateur

Tektronix

Tektronix WFM4000 Series Manuel utilisateur

Tektronix

Tektronix CDC250 Manuel utilisateur

Tektronix

Tektronix VM700T Manuel utilisateur

Tektronix

Tektronix Keithley 4200A-SCS Manuel utilisateur

Tektronix

Tektronix P6243 Manuel utilisateur

Tektronix

Tektronix TPA-N-VPI Manuel utilisateur

Tektronix

Tektronix RSA306 Manuel

Tektronix

Tektronix TDS5032 Manuel utilisateur

Tektronix

Tektronix CSA8000 Series Manuel utilisateur

Tektronix

Tektronix TLA7000 Series Manuel utilisateur

Tektronix

Tektronix P6231 Manuel utilisateur

Tektronix

Tektronix TLA7AA Series Manuel utilisateur

Tektronix

Tektronix Keithley SourceMeter 2470 Manuel utilisateur

Tektronix

Tektronix RSA3303A Manuel utilisateur

Tektronix

Tektronix P7260 Manuel utilisateur

Tektronix

Tektronix PRISM Manuel utilisateur

Tektronix

Tektronix 5D10 Manuel utilisateur

Tektronix

Tektronix TLA7S08 Manuel utilisateur

Tektronix

Tektronix TTR500 series Manuel du produit

Tektronix

Tektronix WFM8300 Guide de l'administrateur

Tektronix

Tektronix WVR6020 Manuel d'utilisation et d'entretien

Tektronix

Tektronix 7D01 Manuel de référence

Tektronix

Tektronix P5934 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur