Tektronix 80A05 Manuel utilisateur

User Manual

80A05

Electrical Clock Recovery Module

071-1467-00

This document applies to firmware version 2.0.0

and above.

www.tektronix.com

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes

that in all previously published material. Specifications and price change privileges reserved.

Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077-0001

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

TekConnect and VocalLink are registered trademarks of Tektronix, Inc.

TekVISA, FastFrame, and MultiView Zoom are trademarks of Tektronix, Inc.

WARRANTY

Tektronix warrants that the products that it manufactures and sells will be free from defects in materials and workmanship

for a period of one (1) year from the date of shipment. If a product proves defective during this warranty period, Tektronix,

at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in

exchange for the defective product.

In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of the

warranty period and make suitable arrangements for the performance of service. Customer shall be responsible for

packaging and shipping the defective product to the service center designated by Tektronix, with shipping charges prepaid.

Tektronix shall pay for the return of the product to Customer if the shipment is to a location within the country in which the

Tektronix service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any

other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate

maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage resulting

from attempts by personnel other than Tektronix representatives to install, repair or service the product; b) to repair

damage resulting from improper use or connection to incompatible equipment; c) to repair any damage or malfunction

caused by the use of non-Tektronix supplies; or d) to service a product that has been modified or integrated with other

products when the effect of such modification or integration increases the time or difficulty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR

IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’ RESPONSIBILITY TO

REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO

THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IRRESPECTIVE

OF WHETHER TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH

DAMAGES.

80A05 Electrical Clock Recovery Module User Manual i

Table of Contents

General Safety Summary iii.......................................

Preface v...................................................

Manual Structure v................................................

Related Manuals v.................................................

Contacting Tektronix vi.............................................

Getting Started 1............................................

Product Description 1..............................................

Options and Accessories 3...........................................

Installation 4.....................................................

Electrostatic Discharge 5............................................

Static Controlled Workstation 5......................................

Operating Basics 7..........................................

Usage 7.........................................................

Front Panel 7.....................................................

Power LED 7.....................................................

Input and Output Connectors 8.......................................

System Interaction 9...............................................

Programmer Interface Commands 9...................................

User Adjustments 9................................................

Specifications 11.............................................

Table of Contents

ii 80A05 Electrical Clock Recovery Module User Manual

80A05 Electrical Clock Recovery Module User Manual iii

General Safety Summary

Review the following safety precautions to avoid injury and prevent damage to

this product or any products connected to it. To avoid potential hazards, use this

product only as specified.

Only qualified personnel should perform service procedures.

While using this product, you may need to access other parts of the system. Read

the General Safety Summary in other system manuals for warnings and cautions

related to operating the system.

Ground the Product. This product is indirectly grounded through the grounding

conductor of the mainframe power cord. To avoid electric shock, the grounding

conductor must be connected to earth ground. Before making connections to the

input or output terminals of the product, ensure that the product is properly

grounded.

Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings

and markings on the product. Consult the product manual for further ratings

information before making connections to the product.

Do Not Operate Without Covers. Do not operate this product with covers or panels

removed.

Avoid Exposed Circuitry. Do not touch exposed connections and components

when power is present.

Do Not Operate With Suspected Failures. If you suspect there is damage to this

product, have it inspected by qualified service personnel.

Do Not Operate in Wet/Damp Conditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Terms in this Manual. These terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that could result

in injury or loss of life.

CAUTION. Caution statements identify conditions or practices that could result in

damage to this product or other property.

ToAvoidFireor

Personal Injury

Symbols and Terms

General Safety Summary

iv 80A05 Electrical Clock Recovery Module User Manual

Terms on the Product. These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you read the

marking.

WARNING indicates an injury hazard not immediately accessible as you read the

marking.

CAUTION indicates a hazard to property including the product.

Symbols on the Product. The following symbols may appear on the product:

CAUTION

Refer to Manual

WARNING

High Voltage

Protective Ground

(Earth) Terminal

80A05 Electrical Clock Recovery Module User Manual v

Preface

This is the user manual for the 80A05 Electrical Clock Recovery module. The

manual covers capabilities, installation, operation, and specifications of the

module.

Manual Structure

This manual is composed of the following chapters:

HGetting Started shows you how to configure and install your module and

lists standard and optional accessories.

HOperating Basics describes controlling the module using the front panel and

the instrument user interface, system interaction, the programmer interface,

and user adjustments.

HSpecifications lists all typical and guaranteed specifications for this product.

Related Manuals

This manual is part of a document set of standard-accessory manuals and online

documentation; this manual mainly focuses on installation and background

needed to use the module features. See the following list for other documents

supporting CSA8000 and TDS8000 instrument operation and service. The part

numbers of these documents are listed in the Accessories section of your

instrument user manual.

Manual name Description

CSA8000 & TDS8000 Online Help An online help system integrated with the User Interface application that ships with the

CSA8000 and TDS8000 instruments

CSA8000 & TDS8000 ReferencesA quick reference to major features of the instrument and how the features operate

CSA8000 & TDS8000 Programmer Online

Guide

An alphabetical listing of the programming commands and other information related to

controlling the instrument over the GPIB

CSA8000 & TDS8000 Service Manual A manual describing how to service the instrument to the module level. You must order

the optional manual separately

Preface

vi 80A05 Electrical Clock Recovery Module User Manual

Contacting Tektronix

Phone 1-800-833-9200*

Address Tektronix, Inc.

Department or name (if known)

14200 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

Web site www.tektronix.com

Sales support 1-800-833-9200, select option 1*

Service support 1-800-833-9200, select option 2*

Technical support Email: techsupport@tektronix.com

1-800-833-9200, select option 3*

1-503-627-2400

6:00 a.m. -- 5:00 p.m. Pacific time

* This phone number is toll free in North America. After office hours, please leave a

voice mail message.

Outside North America, contact a Tektronix sales office or distributor; see the

Tektronix web site for a list of offices.

Table des matières

Autres manuels Tektronix Unité de contrôle

Tektronix

Tektronix TM 5006 Manuel utilisateur

Tektronix

Tektronix TDS3TMT Manuel utilisateur

Tektronix

Tektronix TLA7B Series Manuel utilisateur

Tektronix

Tektronix TM 502A Manuel utilisateur

Tektronix

Tektronix Keithley 7706 Manuel utilisateur

Tektronix

Tektronix KEITHLEY 7703 Manuel utilisateur

Tektronix

Tektronix 80C14 Manuel utilisateur

Tektronix

Tektronix 7A21N Manuel utilisateur

Tektronix

Tektronix TDS3FFT Manuel utilisateur

Tektronix

Tektronix 80E07 Manuel utilisateur

Tektronix

Tektronix KEITHLEY 7700 Manuel utilisateur

Tektronix

Tektronix 73A-270 Manuel utilisateur

Tektronix

Tektronix MultiPaq VX4101A Manuel utilisateur

Tektronix

Tektronix 80E01 Manuel utilisateur

Tektronix

Tektronix VX4287 Manuel utilisateur

Tektronix

Tektronix KEITHLEY 4225-RPM Manuel utilisateur

Tektronix

Tektronix TDS3LIM Manuel utilisateur

Tektronix

Tektronix VX4342 Manuel utilisateur

Tektronix

Tektronix TM 504 Manuel utilisateur

Tektronix

Tektronix VX4240 Manuel utilisateur

Tektronix

Tektronix 80C12B Series Manuel utilisateur

Tektronix

Tektronix TM 501 Manuel utilisateur

Tektronix

Tektronix TM 5006 Manuel utilisateur

Tektronix

Tektronix 73A-541 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur