Tecnoalarm TP8-64 Manuel utilisateur
USER MANUALUSER MANUAL
USER MANUALUSER MANUAL
USER MANUAL
Release: 3.0
Update: June2009
Language: English
FWversion: 2.3
TP8-64TP8-64
TP8-64TP8-64
TP8-64
TP8-64 METTP8-64 MET
TP8-64 METTP8-64 MET
TP8-64 MET
8 - 64 ZONES
CONTROL PANEL
II UserManual-TP8-64
The features of the control panel can be subject to change without notice.
Unauthorized reproduction or distribution of this manual, or any portion of it, on any device and in any form, is
prohibited.
The contents of this manual may be subject to change without notice.
III
TP8-64-UserManual
CONFORMITY
Hereby,Tecnoalarmsrldeclaresthatthepresentequipmentisincompliancewiththeessentialrequirementsand
otherrelevantprovisionsoftheR&TTE1999/05/ECdirective.
Thedeclarationofconformityisavailableonthewebsite:www.tecnoalarm.com.
IV UserManual-TP8-64
TP8-64 - User Manual Index 1
INDEX
1. GENERAL FEATURES
1.1 CODES 1-1
1.1.1 Master menu 1-1
1.1.2 Standard user menu 1-2
1.2 ELECTRONIC KEYS 1-2
1.3 CONTROL BY TELEPHONE 1-2
1.3.1 Skip answering machine 1-2
1.4 PROGRAMS 1-3
1.5 COMPOSITION OF THE CONTROL PANEL 1-3
2. SIGNALING
2.1 LED SIGNALING OF THE CONSOLES 2-1
2.1.1 Alarm LED - Red 2-3
2.1.2 Control LED - Yellow 2-5
2.2 LED SIGNALING OF THE TP SDN ELECTRONIC KEYPAD 2-6
2.2.1 Program alarm LED - Yellow 2-6
2.2.2 General alarm LED - Red 2-6
2.2.3 Keypad status LED - Green 2-7
2.2.4 Program status LED - Red 2-7
2.3 LED SIGNALING OF THE TP SK6N KEY READER WITH MINI KEYPAD 2-8
2.3.1 Program alarm LED - Red 2-8
2.3.2 General alarm LED - Red 2-8
2.3.3 Program status LED - Yellow 2-9
2.3.4 Zone status LED - Yellow 2-9
2.3.5 Key LED - Green 2-9
2.4 LED SIGNALING OF THE ATPK KEY READER 2-10
2.4.1 Program status LED - Red, yellow, green 2-10
2.4.2 Program and general alarm LED - Yellow 2-10
2.5 RESET OF ALARM MEMORY SIGNALING 2-11
2.5.1 Reset of LED signaling with master code 2-11
2.5.2 Reset of LED signaling with installer code (tamper LED signaling) 2-11
3. PROGRAMMING (MASTER CODE REQUIRED)
3.1 ACTIVATION/DEACTIVATION REMOTE CONTROLS 3-3
3.2 CLOCK SETTING 3-3
3.3 FUNCTIONS 3-3
3.4 CREATION/MODIFICATION OF THE PROGRAMS 3-3
3.5 TIMERS AND ACCESS PERIODS 3-4
3.5.1 Timers 3-4
2.5.2 Access periods 3-5
3.6 PROGRAMMING OF THE TELEPHONE PARAMETERS 3-6
3.6.1 Settings 3-6
3.6.2 PABX switchboard 3-6
3.6.3 Channels (A...H) 3-7
3.6.4 Call back 3-7
3.6.5 Mobile phone 3-7
3.7 PROGRAMMING OF THE CODES 3-8
3.7.1 Master code 3-8
3.7.2 Standard user codes 3-9
3.8 PROGRAMMING OF THE KEYS 3-10
3.8.1 Access periods 3-10
3.8.2 Programs 3-10
Index User Manual - TP8-64
2
3.8.3 Attributes 3-11
3.8.4 Learning 3-11
3.9 PROGRAMMING OF THE WIRELESS KEYS 3-11
3.9.1 Periods 3-11
3.9.2 Association buttons 3-12
3.9.3 Attributes 3-12
3.9.4 Learning 3-12
3.10 PROGRAMMING OF THE CONSOLES 3-13
3.11 EXCLUSION OF MODULES/ZONES 3-13
3.11.1 Exclusion of zones 3-13
3.12 TEST 3-14
3.12.1 Zone test 3-14
3.12.2 Indoor siren test 3-14
3.12.3 Outdoor siren test 3-14
3.12.4 Viewing of the firmware version 3-14
3.12.5 Viewing of the vocabulary version 3-14
3.12.6 Viewing of the LED status 3-14
3.12.7 GSM module test 3-15
3.13 ENABLING OF REMOTE ACCESS 3-15
4. CONTROL BY CONSOLE
4.1 ARMING 4-4
4.1.1 Arming with master code 4-6
4.1.2 Arming with standard user code 4-7
4.1.3 Quick arming (if enabled) 4-7
4.1.4 Arming through key zone 4-8
4.1.5 Automatic arming 4-8
4.1.6 Arming during access periods 4-8
4.1.7 Arming denied 4-9
4.2 DISARMING 4-9
4.2.1 Disarming with master code 4-9
4.2..2 Disarming with standard user code 4-9
4.2.3 Disarming under duress (if enabled) 4-10
4.2.4 Quick disarming (if enabled) 4-10
4.2.5 Disarming through key zone 4-10
4.2.6 Automatic disarming 4-10
4.2.7 Disarming during access periods 4-10
4.3 BY-PASS 4-10
4.3.1 By-pass activation with code 4-10
4.3.2 Automatic by-pass activation 4-11
4.3.3 Activation of by-pass during the access periods 4-11
4.3.4 Deactivation of by-pass 4-11
4.3.5 Automatic deactivation of by-pass 4-11
4.3.6 Deactivation of by-pass on expiry of maximum by-pass time 4-11
4.4 ACTIVATION/DEACTIVATION REMOTE CONTROLS 4-12
4.5 MANUAL COMMUNICATOR BLOCK 4-12
4.6 VIEWING OF THE EVENT BUFFER 4-13
4.7 RESET OF LED SIGNALING 4-14
4.7.1 Reset of LED signaling with master code 4-14
4.7.2 Reset of LED signaling with installer code (tamper LED signaling) 4-14
QUICK COMMANDS - OPERATIONS WITHOUT CODE
4.8 RELEASE OF PANIC ALARM 4-15
4.9 VIEWING OF ZONE STATUS 4-15
4.10 VIEWING ALARM MEMORY 4-15
TP8-64 - User Manual Index 3
5. CONTROL BY KEYPOINT
5.1 CONTROL BY TP SK6N KEY READER WITH MINI KEYPAD 5-1
5.1.1 Arming 5-1
5.1.2 Disarming 5-3
5.1.3 By-pass 5-3
5.1.4 Release of panic alarm 5-4
5.2 CONTROL THROUGH TP SKN INTERFACE FOR ELECTRONIC KEYS AND
ATPK KEY READERS 5-4
5.2.1 Arming 5-4
5.2.2 Disarming 5-6
5.2.3 By-pass 5-7
5.3 SPECIAL OPERATING CONDITIONS 5-8
5.3.1 False key alarm 5-8
5.3.2 Simultaneous arming by several control units 5-8
5.3.3 Simultaneous arming with code and key 5-8
5.3.4 Automatic disarming for alarm 5-8
5.3.5 Automatic communicator block 5-8
5.3.6 Trouble/general alarm 5-8
5.4 CONTROL BY TP SDN ELECTRONIC KEYPAD 5-9
5.4.1 Arming 5-9
5.4.2 Disarming 5-11
5.4.3 By-pass 5-11
5.4.4 Special operating conditions 5-12
5.5 TX240-3 WIRELESS KEY 5-13
5.5.1 Arming 5-13
5.5.2 Disarming 5-13
5.5.3 By-pass 5-14
5.5.4 Learning 5-14
6. CONTROL BY TELEPHONE
6.1 CALL FOR SYSTEM STATUS CHECK 6-1
6.1.1 System status check 6-1
6.1.2 Arming/disarming 6-1
6.1.3 Remote activation/deactivation of devices 6-2
6.1.4 Remote digital verification RDV 6-2
6.1.5 Opening message 6-3
6.2 RECEPTION OF AN ALARM CALL 6-3
Index User Manual - TP8-64
4
TP8-64 - User Manual Notes I
IMPORTANT NOTES
The system TP8-64 is very easy to use.
Thus, we recommend to arm the system every time you leave your rooms unattended, even if for short periods
of time.
For your own safety keep all the codes secret.
In case you are robbed of your keys or you lose them, contact your installer immediately for their replacement.
APPLICATION NOTES
When you are at home
Never leave the doors and windows open. If possible, arm the system partially in order to protect the perimeter
and the rooms that you do not use.
When you go out
Verify thoroughly that all the doors and windows protected are closed.
Verify on the console that the system is functioning correctly and that there is no alarm or error signaling
active.
Arm the system completely (all the programs needed to protect all the zones of the system).
When you go on holiday
Verify that all the batteries of the system have been checked and replaced with the frequency prescribed by
the installer.
Verify thoroughly that all the doors and windows protected are closed.
Arm the system for test and verify that it works correctly (sirens, detectors etc.).
Arm the system completely (all the programs needed to protect all the zones of the system).
Notes User Manual - TP8-64
II
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Tecnoalarm Système de sécurité
Tecnoalarm
Tecnoalarm TWINTEC MASK BUS Manuel utilisateur
Tecnoalarm
Tecnoalarm SAEL 2010 LED Manuel utilisateur
Tecnoalarm
Tecnoalarm EV REDWAVE BWL Manuel utilisateur
Tecnoalarm
Tecnoalarm SAEL 2010 BUS Manuel utilisateur
Tecnoalarm
Tecnoalarm TWINTEC MASK 18 Manuel utilisateur
Tecnoalarm
Tecnoalarm evolution EV SIREL BWL Manuel utilisateur
Tecnoalarm
Tecnoalarm SIRTEC BUS Manuel utilisateur
Tecnoalarm
Tecnoalarm Evolution EV SAEL BWL Manuel utilisateur
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur