Synology DiskStation DS2411+ Manuel utilisateur

Synology DiskStation DS2411+

Quick Installation Guide

DS2411+04132011

Table of Contents

Chapter 1: Before You Start

Package Contents.............................................................................................................................................................. 3

Synology DiskStation at a Glance.................................................................................................................................... 4

Safety Instructions.............................................................................................................................................................. 5

Chapter 2: Hardware Setup

Tools and Parts for Hard Disk Installation....................................................................................................................... 6

Install Hard Disks................................................................................................................................................................ 6

Add a RAM Module on DiskStation.................................................................................................................................. 8

Start Up Your DiskStation................................................................................................................................................ 11

Chapter 3: Install DSM

Install from Windows........................................................................................................................................................ 12

Install from Mac OS X...................................................................................................................................................... 14

Install from Linux............................................................................................................................................................... 14

Learn More ........................................................................................................................................................................ 16

Appendix A: Specifications

Appendix B: LED Indication Tables

Chapter

Chapter 1: Before You Start

Before you start setting up DiskStation, please check the package contents to verify that you have received the

items below. Please also read the safety instructions carefully before use to prevent your DiskStation from any

damages.

Package Contents

Main Unit x 1 AC power cord x 1

2M RJ-45 LAN cable x 2

Installation disc x 1

Screws for 3.5" hard drives x 52 Screws for 2.5" hard drives x 52 Hard drive tray key x 2

4 Chapter 1: Before You Start

Synology DiskStation at a Glance

No. Name Location Description

1) Power Button Front Panel The Power Button is used to turn Synology DiskStation on or off.

To turn off Synology DiskStation, press the Power Button and hold it until you

hear a beep sound and the Power LED starts blinking.

2) LED Indicators Front Panel The LED indicator is used to display the status of the internal disk and the

system. For more information, see "Appendix B: LED Indication Tables" on

Page 18.

3) Hard Drive Tray

Lock Front Panel The hard drive tray lock is designed for locking/unlocking the trays to the

DiskStation.

4) Hard Drive Tray Front Panel The hard drive tray is designed for loading the hard drives used in

Synology RackStation.

5) RESET Button Back Panel 1.To restore IP, DNS, passwords for the admin account to default value.

2.To reinstall the Synology DiskStation.

6) Expansion Port Back Panel The Expansion port is used to connect Synology Expansion Unit1

Synology DiskStation.

7) Fan Back Panel The fan is built to exhaust waste heat out of Synology DiskStation. It will start

automatically when the server starts. If the fan is malfunctioning, system will

beep every 1 second.

8) Power Port Back Panel The power port is where you connect the power cord to Synology DiskStation.

9) USB Port Back Panel The Synology DiskStation offers USB ports for adding additional external hard

drives, USB printers, or other USB devices.

10) Console Port &

VGA Port Back Panel This port is used for manufacturing use only.

11) LAN Port Back Panel The LAN port is where you connect RJ-45 cable to Synology DiskStation.

---------

1For more information about Synology Expansion Unit supported by your DiskStation, please visit www.synology.com.

5 Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Make sure the environment does not

experience abrupt changes in temperature or humidity.

Keep Synology product upright. Do not lay it down horizontally.

Do not place the Synology product close to any liquid.

Before cleaning, unplug the power cord first. Wipe Synology product with damp paper towels. Do

not use chemical or aerosol cleaners to clean it.

not place the Synology product on a cart, table, or desk, which is not stable to avoid the

product from falling over.

The power cord must plug in to the right supply voltage. Make sure that the supplied AC voltage

is correct and stable.

To remove all

electrical current from the device, ensure that all power cords are disconnected

from the power source.

Chapter

Chapter 2: Hardware Setup

Tools and Parts for Hard Disk Installation

A screwdriver

At least one 3.5” or 2.5” SATA hard disk

(Please visit www.synology.com for compatible hard disk models.)

Warning: If you install a hard disk that contains data, system will format the hard disk and erase all data. If you need

the data in the future, please back it up before installation.

Install Hard Disks

1 Insert the hard drive tray key into the hard drive tray lock, and turn the key 90˚clock-wise (to the Unlock

position) to unlock the handles of the hard drive trays.

2 Pull the handle of the hard drive tray to remove it from DiskStation.

7 Chapter 2: Hardware Setup

3 Load the hard disk in the hard drive tray.

For 3.5” Hard Disk: Place the hard disk in the hard drive tray, and then tighten the screws to secure the

hard disk.

For 2.5” Hard Disk: Place the hard disk in the blue area (shown below) of the hard drive tray, turn the tray

upside down, and then tighten the screws to secure the hard disk.

4 Insert the loaded hard drive tray into the empty hard disk bay.

Important: Make sure the tray is pushed in all the way. Otherwise, the hard disk might not be able to function

properly.

5 Press the handle in flush with the front panel to hold the hard drive tray in place.

8 Chapter 2: Hardware Setup

6 Turn the hard drive tray key 90˚counter clock-wise (to the Lock position) to lock the handles of the hard drive

trays.

7 Repeat the above steps to install all the other disks on your DiskStation.

8 The disks’ positions are numbered as shown below.

Note: If you want to set up a RAID set, it is recommended that all installed hard disks are of the same size to make

the best use of hard disk capacity.

Add a RAM Module on DiskStation

Synology RAM module 1GB/2GB is designed for DiskStation memory expansion, and is optional for your choice.

Follow the steps below to install, check, or remove your RAM module.

Install the RAM Module

1 Shut down your DiskStation. Disconnect all cables connected to your DiskStation to prevent any possible

damages.

9 Chapter 2: Hardware Setup

2 Remove the 2 screws that secure the side cover. Then remove the cover and place it to the side.

Important: When you remove the case, you expose sensitive internal components. Avoid touching anything other

than the memory assembly when you remove or add memory.

3 Insert the new memory module in the slot:

a Align the notch on the gold edge of the module with the notch in the lower memory slot.

b Tilt the card and push the memory into the slot. Make sure the module is pushed in all the way.

c Use two fingers with firm, even pressure to push down on the memory module. You should hear a click

when the memory is inserted correctly.

Important: Hold the memory module by its edges, and do not touch the gold connectors.

4 Replace the side case. Replace and tighten the 2 screws you removed in step 2.

Make Sure DiskStation Recognizes the New Memory Capacity

After installing the memory module on DiskStation, it’s recommended that you check whether the server

recognizes the new memory.

To check DiskStation’s memory:

1 Install DSM. (See the next chapter for more information.)

10 Chapter 2: Hardware Setup

2 Log in to Synology DiskStation Manager.

3 Check Total Physical Memory in Main Menu > System Information.

If your DiskStation doesn’t recognize the memory or doesn’t start up correctly, confirm that the memory is

installed correctly.

Remove the RAM Module from DiskStation

1 Follow step 1 and 2 of the “Install the RAM Module” section to remove the case of DiskStation.

2 Push the levers on the sides of the memory module in an outward direction to release the module from the

memory card slot. Before removing it, make sure you see the half-circle notches. If you don’t, try pushing the

levers outward again.

3 Hold the memory module by its notches and remove it from the slot.

4 Replace the side cover. Replace and tighten the 2 screws you removed in step 1.

DS2411+

Autres manuels Synology Stockage

Synology

Synology RackStation RS815 Manuel utilisateur

Synology

Synology DiskStation DS415play Manuel utilisateur

Synology

Synology DiskStation DS418 Manuel

Synology

Synology DS120j Manuel

Synology

Synology TC500 Manuel utilisateur

Synology

Synology RackStation RS814 Manuel utilisateur

Synology

Synology DS509+ Manuel utilisateur

Synology

Synology DiskStation DS214se Manuel utilisateur

Synology

Synology DS224+ Manuel utilisateur

Synology

Synology DS2422+ Manuel utilisateur

Synology

Synology DS207 Series Manuel utilisateur

Synology

Synology NAS DS220+ Manuel

Synology

Synology DS1813+ Manuel utilisateur

Synology

Synology DiskStation DS415+ Manuel utilisateur

Synology

Synology DiskStation DS419slim Manuel

Synology

Synology RS1221+ Manuel

Synology

Synology DiskStation DS118 Manuel

Synology

Synology DiskStation DS418j Manuel

Synology

Synology DS224+ Manuel utilisateur

Synology

Synology DS418play Manuel

Synology

Synology DiskStation DS1019+ Manuel

Synology

Synology DS-101j Manuel utilisateur

Synology

Synology DiskStation DS216j Manuel utilisateur

Synology

Synology DiskStation DS209 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur