Synology DiskStation DS3615xs Manuel utilisateur

Synology DiskStation DS3615xs

Quick Installation Guide

Table of Contents

Chapter 1: Before You Start

Package Contents 3

Synology DiskStation at a Glance 4

Safety Instructions 5

Chapter 2: Hardware Setup

Tools and Parts for Drive Installation 6

Install Drives 6

Start Up Your DiskStation 9

Add a RAM Module on DiskStation 10

Add a Network Interface Card on DiskStation 14

Replace System Fan 16

Chapter 3: Install DSM on DiskStation

Install DSM with Web Assistant 17

Learn More 17

Appedix A: Specications

Appedix B: LED Indicator Table

Synology_QIG_DS3615xs_20141127

Thank you for purchasing this Synology product! Before setting up your new DiskStation, please check the

package contents to verify that you have received the items below. Also, make sure to read the safety instructions

carefully to avoid harming yourself or damaging your DiskStation.

Package Contents

Main unit x 1 AC power cord x 1

RJ-45 LAN cable x 2

Screws for 2.5” hard drives x 52

Hard drive tray key x 2

Before You Start 1

Chapter

4Chapter 1: Before You Start

Synology DiskStation at a Glance

No. Article Name Location Description

1Status Indicator

Front Panel

Displays the status of the system. For more information, see "Appendix B:

LED Indicator Table".

2Alert Indicator Displays warnings regarding fan or temperature. For more information, see

"Appendix B: LED Indicator Table".

3Power Button

1. Press to power on the DiskStation.

2. To power off the DiskStation, press and hold until you hear a beep sound

and the Power LED starts blinking.

4LAN Indicator Displays the status of the network connection. For more information, see

"Appendix B: LED Indicator Table".

5Drive Status Indicator Displays the status of the installed drive. For more information, see "Appendix

B: LED Indicator Table".

6Drive Tray Install drives (hard disk drives or solid state drives) here.

7Drive Tray Lock Lock or unlock drive trays.

8Power Port

Back Panel

Connect the AC power cord here.

9Fan Disposes of excess heat and cools the system. If the fan malfunctions, the

DiskStation will emit a beeping sound.

10 PCI Express

Expansion Slot Supports a PCIe x8 network interface card.

11 USB 3.0 Port Connect external hard drives, USB printers, or other USB devices to the

DiskStation here.

12 Expansion Port Connect Synology Expansion Unit1to the DiskStation here.

13 Console Port This port is used for manufacturing use only.

14 RESET Button

1. Press and hold until you hear a beep sound to restore the default IP

address, DNS server, and password for the admin account.

2. Press and hold until you hear a beep sound, then press and hold again

until you hear three beep sounds to return the DiskStation to “Not Installed”

status so that DiskStation Manager (DSM) can be reinstalled.

15 LAN Port Connect network cables here.

1For more information about Synology Expansion Unit supported by your DiskStation, please visit www.synology.com.

5Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Make sure the environment does not

experience abrupt changes in temperature or humidity.

Place the product right side up at all times.

Do not place near any liquids.

Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or

aerosol cleaners.

To prevent the unit from falling over, do not place on carts or any unstable surfaces.

The power cord must plug in to the correct supply voltage. Make sure that the supplied AC voltage is

correct and stable.

To remove all electrical current from the device, ensure that all power cords are disconnected from

the power source.

Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries appropriately.

Tools and Parts for Drive Installation

• A screwdriver (only for 2.5” drives)

• At least one 3.5” or 2.5” SATA drive (please visit www.synology.com for compatible drive models.)

Warning: If you install a drive that contains data, the system will format the drive and erase all existing data. Please

back up any important data before installation.

Install Drives

1 Press the right part of the hard drive tray to pop out the handle.

2 Pull the hard drive tray handle in the direction as indicated below to remove the hard drive tray.

Hardware Setup

Chapter

7Chapter 2: Hardware Setup

3 Load drives in the drive trays.

• For 3.5” drives: Remove the fastening panels from the sides of the drive tray. Place the drive in the drive

tray. Then insert the fastening panels to secure the drive in place.

• For 2.5” drives: Remove the fastening panels from the sides of the drive tray and store them in a safe

place. Place the drive in the blue area (shown below) of the drive tray. Turn the tray upside down and tighten

the screws to secure the drive in place.

4 Insert the loaded hard drive tray into the empty hard drive bay.

Note: Make sure the tray is pushed in all the way. Otherwise, the drive might not be able to function properly.

5 Pressthehandleinushwiththefrontpaneltoholdtheharddrivetrayinplace.

8Chapter 2: Hardware Setup

6 Insert the hard drive tray key into the hard drive tray lock, turn the key clockwise (to the “-” position) to lock the

handle of the hard drive tray, and then remove the key.

7 Repeat the steps above to assemble the other drives you have prepared.

8 Drives are numbered as shown below.

Note: If you want to create a RAID volume, we recommended that all installed drives are of the same size to make the

best use of drive capacity.

9Chapter 2: Hardware Setup

Start Up Your DiskStation

1 Use the LAN cable to connect the DiskStation to your switch, router or hub.

2 Connect one end of the AC power cord to the power port of the DiskStation, and the other to the power outlet.

3 Press the power button.

Congratulations! Your DiskStation is now online and detectable from a network computer.

10 Chapter 2: Hardware Setup

Add a RAM Module on DiskStation

The optional Synology DDR3 RAM module is designed for DiskStation memory expansion. Follow the steps

below to install, check, or remove a RAM module on your DiskStation.

To install the RAM module:

1 Shut down your DiskStation. Disconnect all cables connected to your DiskStation to prevent any possible

damage.

2 Remove the inner panel:

a Remove the 4 screws on the back of DiskStation, and then pull the top and side cover. Place both covers to

the side.

b Remove the 7 screws that secure the inner panel.

Note: When you remove the case, you expose sensitive internal components. Avoid touching anything other than the

memory assembly when you remove or add memory.

Table des matières

Autres manuels Synology Stockage

Synology

Synology RS3413xs+ Manuel utilisateur

Synology

Synology diskstation DS416J Manuel utilisateur

Synology

Synology DiskStation DS414 Manuel utilisateur

Synology

Synology RackStation RS815 Manuel utilisateur

Synology

Synology RackStation RS2414RP+ Manuel utilisateur

Synology

Synology DiskStation DS3617xs Manuel

Synology

Synology DiskStation DS110+ Manuel utilisateur

Synology

Synology DS1823XS+ Manuel utilisateur

Synology

Synology DiskStation DS716+II Manuel utilisateur

Synology

Synology DX517 Manuel

Synology

Synology DiskStation DS214 Manuel utilisateur

Synology

Synology CS-406 Manuel utilisateur

Synology

Synology DiskStation DS1517+ Manuel

Synology

Synology DiskStation DS214se Manuel utilisateur

Synology

Synology DiskStation DS718+ Manuel

Synology

Synology DiskStation DS416play Manuel utilisateur

Synology

Synology DiskStation DS213+ Manuel utilisateur

Synology

Synology DiskStation DS2411+ Manuel utilisateur

Synology

Synology SA3600 Manuel

Synology

Synology RackStation RS2423RP+ Manuel utilisateur

Synology

Synology DS923+ Manuel utilisateur

Synology

Synology DiskStation DS1019+ Manuel

Synology

Synology RS1221+ Manuel

Synology

Synology RackStation RS814 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur