Symmons Evolution EVOFQ038KIT Manuel utilisateur

Evolution

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: (800) 796-6667 ■ Fax: (800) 961-9621

EVOFQ038KIT, EVOFQ075KIT, EVOFQ125KIT,

EVOFQ200KIT

Evolution Flow Sensor Module, Clamp-on Meter

Installation Guide

Model Numbers Feature Highlights

☐EVOFQ038KIT FLOW SENSOR, Clamp-on Meter,

1/4" to 3/8"

☐EVOFQ075KIT FLOW SENSOR, Clamp-on Meter,

1/2" to 3/4"

☐EVOFQ125KIT FLOW SENSOR, Clamp-on Meter,

1" to 1-1/4"

☐EVOFQ200KIT FLOW SENSOR, Clamp-on Meter,

1-1/2" to 2"

• Flow Sensor Meter

• 24V DC Power Supply 60"

• 30 Foot M12 Cable

• Clamp-On Meter - Pipe Sizes ranging from 1/4" to

1-1/2" - Please see "Supported Pipe Diameter" Chart on

dimension page for appropriate sizing.

Location:

Compliance

• IC: 24889-WW08189

• FCC ID: 2ASQP-WW08189

This device complies with part 15 of the FCC Rules.

Limited Lifetime - to the original end

purchaser in consumer/residential

installations.

10 Years - for commercial/industrial

installations. Refer to

www.symmons.com/warranty for

complete warranty information.

Warranty

Symmons Evolution EVOFQ038KIT, EVOFQ075KIT, EVOFQ125KIT, EVOFQ200KIT Includes ﬂow sensor module, 24 V

DC power supply, 30 foot M12 cable, and clamp-on meter (pipe sizes ranging from 1/4” to 1-1/2”). 10 Year Commercial

Warranty. FCC rules compliant.

Architectural/ Engineering Speciﬁcation

Repair Parts

☐EVOAPWR24 Replacement Power Supply

24VDC

Evolution

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: (800) 796-6667 ■ Fax: (800) 961-9621

EVOFQ038KIT, EVOFQ075KIT, EVOFQ125KIT,

EVOFQ200KIT

PCBA Plug

30 Feet

M12

Power Jack

1-11/16”

60”

Power Supply

24C DC

Evolution Sensor

Module

Dimensions - Flow Sensor (Included in Kit)

Measurement

A1-7/16"

B1-5/8"

C5"

D3-7/8"

E6-1/2"

X 4

X 12

Mounting Hardware

Evolution

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: (800) 796-6667 ■ Fax: (800) 961-9621

EVOFQ038KIT, EVOFQ075KIT, EVOFQ125KIT,

EVOFQ200KIT

Dimensions - Clamp On Meter (Included in Kit)

For securing main body to pipe

M4 Thread X 2 -

P0.7, Length 16mm, SUSXM7

106

101

106

Pipe Outside Diameter

Clamp on Meter Dimensions (mm)

Model A B C

EVOFQ038KIT 38 38 25.3

EVOFQ075KIT MAX 2.5 48 30

EVOFQ125KIT MAX 4.2 67 46.7

EVOFQ200KIT MAX 3.6 88 56

Supported Pipe Diameter

Model EVOFQ038KIT EVOFQ075KIT EVOFQ125KIT EVOFQ200KIT

Outer Diameter (mm) Ø12 to Ø16 Ø16 to Ø18 Ø18 to Ø23 Ø23 to Ø28 Ø28 to Ø37 Ø37 to Ø44 Ø44 to Ø52 Ø52 to Ø64

NPS (Nominal Pipe Size) 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

DN (Diameter Nominal) 8 A 10 A 15 A 20 A 25 A 32 A 40 A 50 A

Evolution

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: (800) 796-6667 ■ Fax: (800) 961-9621

EVOFQ038KIT, EVOFQ075KIT, EVOFQ125KIT,

EVOFQ200KIT

Installation Training Checklist

Setup Custom on Evolution App

Install Gateway

Install Temperature Sensor

Install Pipe Clamp-On Flow Sensor

Conﬁgure System

1. Open the Box and Find a location to plug in the Gateway

2. Unpack, assemble, and plug Gateway to 120VAC Supply

3. Creates and Conﬁgure Customer Property

4. Creates Customer account and send Email Invitation

5. Customer Logs into water.symmons.com

6. Download the Evolution App for iOS or Android and Sign-In

7. Scan Gateway QR Code and Complete App Steps

8. Plug a Temperature Probe into a Sensor Module and Turn ON

9. Install Temperature Sensor

10. Scan Temperature Sensor Module and Complete App Steps

11. Plug Clamp-on Keyence Sensor Probe into Sensor Module and plug power supply

into a 120VAC outlet

12. Install Clamp-on Flow Sensor onto pipe

13. Scan Sensor Module and Complete App Steps

14. Setup Other Users

15. Conﬁgure Alerts

16. Set Meeting for System follow-up (1-2 weeks from Training)

Evolution

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: (800) 796-6667 ■ Fax: (800) 961-9621

EVOFQ038KIT, EVOFQ075KIT, EVOFQ125KIT,

EVOFQ200KIT

A. Locate Gateway, Power

Adapter, (1x) Thin Antenna,

(2x) Wide Antennas

B. Connect Antennas and Pow-

er Adapter to the back of

the Gateway

Install Gateway

1. Location

1. Connect Gateway Hardware

Mechanical Room Admin. Oce Front Desk

Find a central location for the Gateway. Location should be a secure area not enclosed

in metal. Recommended locations include:

Note: After plugging the Gateway power adapter into an outlet, it could take a few minutes to boot up.

Evolution

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: (800) 796-6667 ■ Fax: (800) 961-9621

EVOFQ038KIT, EVOFQ075KIT, EVOFQ125KIT,

EVOFQ200KIT

Customer App Setup

1. Create and Conﬁgure Customer Property

2. Create Customer account & send Email Invitation

3. Customer Logs into water.symmons.com

4. Download the Evolution App for iOS or Android and Sign-In

5. Scan Gateway QR Code and Complete In-app Steps

Scan the Provided QR Code with your

Smartphone or camera to download the

evolution App.

Evolution

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: (800) 796-6667 ■ Fax: (800) 961-9621

EVOFQ038KIT, EVOFQ075KIT, EVOFQ125KIT,

EVOFQ200KIT

Installation - Pipe Clamp-On Flow Sensor

1. Setup Custom on Evolution App

2. Find the best location to mount.

Tools Required

•Philips-head screwdriver

•The pipe measuring kit include in welcome pack

•Measuring tape to check mounting clearances

A. Determine which sensor for your pipe size,

A. The sensor connects to the module box with either a 10-foot or 30-foot

cable and the module box has a 4-foot power cable that must be plugged

into an electrical outlet.

B. Select a section of a straight pipe that is clean with no insulation, rust, or

seams. If there is insulation on the pipe, cut away a space slightly larger

then the sensor.

C. Look for a pipe that is horizontal or is vertical with an upward ﬂow

D. There are two dierent types of brackets. FD-Q for smaller pipes and FD-R

for larger pipes.

Supported Pipe Diameter

Model EVOFQ038KIT EVOFQ075KIT EVOFQ125KIT EVOFQ200KIT

Outer Diameter (mm) Ø12 to Ø16 Ø16 to Ø18 Ø18 to Ø23 Ø23 to Ø28 Ø28 to Ø37 Ø37 to Ø44 Ø44 to Ø52 Ø52 to Ø64

NPS (Nominal Pipe Size) 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

DN (Diameter Nominal) 8 A 10 A 15 A 20 A 25 A 32 A 40 A 50 A

Evolution

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: (800) 796-6667 ■ Fax: (800) 961-9621

EVOFQ038KIT, EVOFQ075KIT, EVOFQ125KIT,

EVOFQ200KIT

Installation - Pipe Clamp-On Flow Sensor & Module (Cont'd)

3. Mounting EVOFQ038KIT, EVOFQ075KIT, EVOFQ125KIT and EVOFQ200KIT

A. The brackets for FD-Q are designed to be used for two dierent pipe sizes.

The mount can be changed between the two pipe sizes by ﬂipping the bracket

around as shown below. Ensure that the mount is set to the appropriate pipe

size..

B. Take o the mounting ring to expose and remove the four bracket mounting

screws.

C. Straddle the bracket on a clean section of the pipe. Make sure the bracket

is oriented is such a way that it is not on top of a horizontal pipe as this will

cause stability issues when the pipe is completely ﬁlled with ﬂuid. Re-insert the

screws and tighten them evenly until the bracket is snug.

D. Slide the controller mounting

ring back on and carefully re-

place the controller within the

bracket with the display screen

upright and clearly visible.

E. Tighten the two screws evenly so the

controller is securely attached to the

bracket.

Evolution

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: (800) 796-6667 ■ Fax: (800) 961-9621

EVOFQ038KIT, EVOFQ075KIT, EVOFQ125KIT,

EVOFQ200KIT

Installation - Pipe Clamp-On Flow Sensor & Module (Cont'd II)

4. Mounting Sensor Module

A. These modules have a 4-foot

power cord so ﬁnd a location

that is within reach where the

box will be accessible and visi-

ble. The boxes are splash proof

but not waterproof so ﬁnd a dry

place.

B. The modules can be mounted

by either screwing it into a wall

or but using cable ties to at-

tach them to an insulated pipe,

bracket, or hanger.

C. Plug the cable from the ﬂow

sensor into the sensor module.

Once the connector is plugged

in, spinning the locking ring until

it locks into place.

4. Sensor Module App Setup

A. Scan Sensor Module QR Code

B. Complete App Steps

Ce manuel convient aux modèles suivants

Autres manuels Symmons Unité de contrôle

Symmons

Symmons 3DIVBODYSRT Manuel

Symmons

Symmons LaundryMate LM600 Manuel

Symmons

Symmons Temptrol 262BODY Manuel utilisateur

Symmons

Symmons Showeroff 4-420 Manuel

Symmons

Symmons Maxline 7-225 Series Manuel

Symmons

Symmons Maxline 7-210-CK Manuel

Symmons

Symmons Temptrol 262XBODY Manuel utilisateur

Symmons

Symmons 7-102 Manuel

Symmons

Symmons Temptrol VersaFlex S262BODY Manuel utilisateur

Symmons

Symmons 2DIVBODYNSSRT Manuel

Symmons

Symmons Maxline 8210CK Manuel

Symmons

Symmons Temptrol S261BODY Manuel utilisateur

Symmons

Symmons 7-210-CK Manuel

Symmons

Symmons 2DIV-BODY-NS Manuel

Symmons

Symmons LaundryMate LM600 Manuel

Symmons

Symmons Temptrol II Manuel d'utilisation

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur