STMicroelectronics STEVAL-IDB005V1 Manuel utilisateur

Introduction

The STEVAL-IDB005V1 is an evaluation board based on BlueNRG-MS, a low power Bluetooth® Smart IC compliant with the

Bluetooth® specification, and supports both master and slave roles.

The STEVAL-IDB005V1 features an on-board STM32L151RBT6 low power microcontroller. It can be used to explore the

BlueNRG-MS features and as a development platform for Bluetooth® Smart applications running on the STM32L151RBT6

microcontroller and interfacing with the BlueNRG-MS network coprocessor.

Figure 1. STEVAL-IDB005V1 Bluetooth® low energy evaluation board

STEVAL-IDB005V1 evaluation board quick start guide

UM1887

User manual

UM1887 - Rev 3 - October 2018

For further information contact your local STMicroelectronics sales office.

www.st.com

1List of acronyms

Table 1. List of acronyms used in the document

Term Meaning

BLE Bluetooth Low Energy

DK Development kit

SW Software

USB Universal serial bus

UM1887

List of acronyms

UM1887 - Rev 3 page 2/12

2Getting started

The STEVAL-IDB005V1 evaluation board is preprogrammed with sensor profile firmware (BlueNRG-

MS_SensorDemo.hex) which allows to set and establish a connection with a smartphone (iOS 7 or Android 4.3)

running a BlueNRG sensor application which works with the sensor profile firmware running on the STEVAL-

IDB005V1 evaluation board.

The sensor profile firmware implements a proprietary Bluetooth profile which exposes two services: acceleration

and environmental service.

The acceleration service contains the following characteristics:

• Acceleration: it gives the current value of the acceleration detected by the LIS3DH MEMS sensor on the

STEVAL-IDB005V1 board.

• Free fall characteristic: it allows detection of free-fall condition by the LIS3DH MEMS sensor on the STEVAL-

IDB005V1 board (the condition is detected if the acceleration on the 3 axes is near zero for a certain amount

of time).

The environmental service contains characteristics that expose data from some environmental sensors, such as

temperature sensors.

Note: Pressure and humidity characteristics are also defined to potentially support pressure and humidity

environmental sensors. These sensors can been added through an expansion board connected to the STEVAL-

IDB005V1 expansion connector J1 (Figure 1. STEVAL-IDB005V1 Bluetooth® low energy evaluation board

STEVAL-IDB005V1 Bluetooth low energy evaluation board). The expansion board is not included with the

STEVAL-IDB005V1.

For more information about the STEVAL-IDB005V1 components, refer to BlueNRG-MS development kits user

manual (UM1870) available on STEVAL-IDB005V1 web page.

2.1 Powering up STEVAL-IDB005V1 evaluation board running the sensor profile

firmware (peripheral role)

Two power options are available:

•Batteries - To power the STEVAL-IDB005V1 evaluation board using batteries, 2 AAA batteries must be

inserted into the battery holder at the rear of the board, and jumper JP1 set to position 2-3

(Figure 2. STEVAL-IDB005V1 power options STEVAL-IDB005V1 power options (B)).

•USB - To power the STEVAL-IDB005V1 evaluation board through USB, jumper JP1 must be in position 1-2

(Figure 2. STEVAL-IDB005V1 power options STEVAL-IDB005V1 power options (B)). Connect a USB cable

to the mini-USB connector (Figure 2. STEVAL-IDB005V1 power options STEVAL-IDB005V1 power options

(A)) and to a PC USB port.

Once powered, the STEVAL-IDB005V1 sensor profile firmware will start advertising, waiting for a smartphone to

connect to it.

Figure 2. STEVAL-IDB005V1 power options

UM1887

Getting started

UM1887 - Rev 3 page 3/12

2.2 Install the BlueNRG app for smartphones (central role)

Two versions (Android 4.3 and iOS 7) of the smartphone sensor application are available for download on the

specific web pages (Table 2. Reference information, Android 4.3 & iOS SensorApp).

Install the smartphone SensorApp application on the selected smartphone.

2.3 Run BlueNRG app for smartphones

•Launch the BlueNRG SensorApp application on the smartphone

•It will start scanning for the BlueNRG sensor peripheral. A device called “BlueNRG” will appear on the

screen (this is the STEVAL-IDB005V1 running the sensor profile firmware)

• Tap on the BlueNRG name to connect to the STEVAL-IDB005V1 running the sensor profile firmware. The

BlueNRG SensorApp application will enable notifications on the acceleration characteristic and displays the

received value on the screen.

Figure 3. Smartphone BlueNRG SensorApp acceleration notification

• Data from environmental sensors are also periodically read and displayed.

UM1887

Install the BlueNRG app for smartphones (central role)

UM1887 - Rev 3 page 4/12

Figure 4. Smartphone BlueNRG SensorApp environment sensors

Figure 5. Smartphone BlueNRG SensorApp RSSI notifications

UM1887

Run BlueNRG app for smartphones

UM1887 - Rev 3 page 5/12

3SW demonstration applications

• To develop a software application for the STEVAL-IDB005V1 evaluation board, it is recommended to start

with the reference demonstration applications provided within the BlueNRG DK software package available

on the STEVAL-IDB005V1 web page. The BlueNRG DK software package supports both BlueNRG and

BlueNRG-MS devices.

• Unzip the file, launch the related installer and follow installation steps (the default installation path is C:\

\Program Files (x86)\\STMicroelectronics\\BlueNRG DK x.x.x)

• Wait for the package installation to complete.

• The Projects folder in BlueNRG DK SW package contains the available BlueNRG-MS demonstration

applications, IAR projects, sources and header files.

• IAR Embedded Workbench for ARM (EWARM) tool V7.40.3 or later is needed for building and downloading

software applications running on the STM32L151RBT6 microcontroller.

Note: For a description of the available BlueNRG-MS demonstration applications and supported platforms, refer to

BlueNRG-MS development kits user manual (UM1870).

The BlueNRG-MS_SensorDemo.hex prebuilt binary image is also provided within the BlueNRG DK software

package, in the Firmware folder.

UM1887

SW demonstration applications

UM1887 - Rev 3 page 6/12

4References

Table 2. Reference information

What Where Description

BlueNRG-MS Bluetooth low

energy wireless network

processor

www.st.com/bluenrg-ms BlueNRG-MS device web page

Bluetooth low energy

Specification

https://www.bluetooth.org/en-us/specification/

adopted-specifications

Bluetooth Low Energy specification web

page

Smartphone Android 4.3

Sensor App

https://play.google.com/store/apps/details?

id=com.st.bluenrg

Android 4.3 BlueNRG SensorApp web

page

Smartphone iOS SensorApp https://itunes.apple.com/us/app/bluenrg/

id705873549?l=it&ls=1&mt=8 iOS BlueNRG SensorApp web page

STSW-BLUENRG-DK STEVAL-IDB00V51 web page, Tools and

Software section

BlueNRG DK SW package with reference

demonstration applications

STEVAL-IDB005V1 www.st.com/bluenrg-ms, Evaluation Tools

section STEVAL-IDB005V1 platform web page

UM1870 user manual STEVAL-IDB005V1 platform web page, User

Manual section

BlueNRG-MS development kits user

manual describing the reference

demonstration applications

UM1887

References

UM1887 - Rev 3 page 7/12

Revision history

Table 3. Document revision history

Date Revision Changes

25-May-2015 1 Initial release.

04-Apr-2016 2 Removed: Figure 6 BlueNRG-MS DK SW package structure & content

29-Oct-2018 3 Updated Introduction.

Minor text changes.

UM1887

UM1887 - Rev 3 page 8/12

Contents

1List of acronyms...................................................................2

2Getting started ....................................................................3

2.1 Powering up STEVAL-IDB005V1 evaluation board running the sensor profile firmware

(peripheral role) ................................................................3

2.2 Install the BlueNRG app for smartphones (central role)...............................3

2.3 Run BlueNRG app for smartphones ...............................................4

3SW demonstration applications ....................................................6

4References ........................................................................7

Revision history ........................................................................8

UM1887

Contents

UM1887 - Rev 3 page 9/12

List of figures

Figure 1. STEVAL-IDB005V1 Bluetooth® low energy evaluation board ....................................1

Figure 2. STEVAL-IDB005V1 power options ......................................................3

Figure 3. Smartphone BlueNRG SensorApp acceleration notification .....................................4

Figure 4. Smartphone BlueNRG SensorApp environment sensors .......................................5

Figure 5. Smartphone BlueNRG SensorApp RSSI notifications .........................................5

UM1887

List of figures

UM1887 - Rev 3 page 10/12

Table des matières

Autres manuels STMicroelectronics Carte mère

STMicroelectronics

STMicroelectronics EVALSTGAP4S Manuel utilisateur

STMicroelectronics

STMicroelectronics EVALSPEAr320CPU Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32L476G-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32100B-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics STEVAL-3DP001V1 Guide de l'administrateur

STMicroelectronics

STMicroelectronics STM32F4 Series Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32G081B-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics STEVAL-MKI109V2 Manuel utilisateur

STMicroelectronics

STMicroelectronics STEVAL-IHT005V2 Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32F0 Series Manuel utilisateur

STMicroelectronics

STMicroelectronics STEVAL-IHT008V1 Manuel utilisateur

STMicroelectronics

STMicroelectronics STEVAL-LLL002V1 Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32L476 Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32F756G-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32L152D-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics ST7MDTULS-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics STEVAL-ILL028V1 Manuel utilisateur

STMicroelectronics

STMicroelectronics L62 Series Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32439I-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics AEK-POW-BMS63EN Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32100E-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32F4 Series Manuel utilisateur

STMicroelectronics

STMicroelectronics STM3210E-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics STEVAL-ISQ006V1 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur