STMicroelectronics SPC58NHADPT302S Manuel utilisateur

Introduction

The SPC58NHADPT302S Rev.A evaluation board supports STMicroelectronics SPC58NH92 microcontroller in FPBGA

17X17X1.8 302.

Figure 1. SPC58NHADPT302S Rev.A

Note: picture is not contractual.

SPC58NHADPT302S Rev.A evaluation board

UM2725

User manual

UM2725 - Rev 1 - June 2020

For further information contact your local STMicroelectronics sales office.

www.st.com

1Overview

The SPC58NHADPT302S Rev. A mini module is an evaluation board supporting STMicroelectronics SPC58NH92

microcontroller in FPBGA 17X17X1.8 302 package (FPBGA 17X17X1.8 302 2R20+10+2R14+52 B0.55 P0.8).

This mini module is designed to be connected onto the SPC58XXMB motherboard, offering a mechanism for easy

customer evaluation of the supported devices, and to facilitate hardware and software development.

The mini module may be used as a stand-alone unit allowing access to the CPU, but not to access to the I/O pins

nor any motherboard peripherals.

1.1 Package contents

An SPC58NHADPT302S Rev. A adapter package includes the following items:

• SPC58NHADPT302S Rev. A mini module

• Mini CD with user manual and schematics

1.2 Supported devices

The SPC58NHADPT302S Rev. A mini module supports the SPC58NH family of microcontrollers in FPBGA

17X17X1.8 302.

UM2725

Overview

UM2725 - Rev 1 page 2/38

2License agreement

The packaging of this evaluation board was sealed with a seal stating, “by breaking this seal, you agree to the

terms and conditions of the evaluation board license agreement, the terms and conditions of which are available

at http://www.st.com/ebla”. Upon breaking the seal, you and STMicroelectronics entered into the evaluation board

license agreement, a copy of which is also enclosed with the evaluation board for convenience.

Attention: This evaluation board only offers limited features for evaluating ST products. It has not been tested for use with

other products and is not suitable for any safety or other commercial or consumer application. This evaluation

board is otherwise provided “AS IS” and STMicroelectronics disclaims all warranties, express or implied,

including the implied warranties of merchantability and fitness for a particular purpose.

UM2725

License agreement

UM2725 - Rev 1 page 3/38

3Handling precautions

Please take care to handle the package contents in a manner such as to prevent electrostatic discharge.

Before the EVB is used or power is applied, please fully read the following sections on how to correctly configure

the board. Failure to correctly configure the board may cause irreparable component, MCU or EVB damage.

UM2725

Handling precautions

UM2725 - Rev 1 page 4/38

4Hardware description

4.1 Hardware features

The SPC58NHADPT302S Rev. A mini module board has the following features:

• Connector for external power supplies input (5 V) used in stand-alone mode

• Reset button with driver and led indicator

• Socket for device in FPBGA302 package

• Debug interfaces:

– 14-pin header connector for JTAG interface

– 10-pin header connector for JTAG/LFAST LVDS interface

– 10-pin header connector for SIPI interface

– 38-pin Nexus parallel debug connector

• 40 MHz crystal main oscillator with jumpers to optionally disconnect it

• 8 MHz oscillator with jumpers to optionally disconnect it

• Clock input through SMA connector with jumper to optionally disconnect it

• 2 X Samtec QSH series, 240-way connector to connect mini module to Motherboard

• 1 Gb/s Ethernet port

• HyperRAM and HyperFlash connected to HyperBUS interface

• Embedded eMMC device

• SD/MMC Card Reader

• 3x Header connectors 5x2 with 0.1” (CIS, ISU and AI connectors)

UM2725

Hardware description

UM2725 - Rev 1 page 5/38

4.2 Hardware dimension

The mini module has the following dimensions:

• PCB area: 127 mm x 114.3 mm

• Top components height: 20 mm max

• Bottom components height: 3.5 mm max

• PCB thickness: 1.6 mm

Figure 2. SPC58NHADPT302S Rev. A top component view

UM2725

Hardware dimension

UM2725 - Rev 1 page 6/38

5Power and system configuration

5.1 Power supplies

The mini module can be powered by providing voltages or supplied externally by the 2-Way PCB Screw

Connector (CN1) or supplied by the motherboard.

When the mini module is connected to the mother board (MB), 3V3 and 5V0 are supplied by MB connector

selecting the associated jumpers. In this setup, the external power supply input available on the mini module

should NOT be used.

When the SPC58NHADPT302S Rev. A mini module is used as a stand-alone board, 5V0 voltages must be

supplied externally, 3V3 and 1V2 voltages will be generated internally by specific circuit on the mini module.

The following jumpers are used to configure the power supply (common for all supported devices):

Table 1. Power configuration jumpers

Jumper Description Default Position

5.0V source for J3 pin1 (MB_5.0V_LR or 5.0V_ADC) voltage

configuration:

• 1-2 MB_5.0V_LR

• 2-3 5.0V_ADC

2-3

(5.0V_ADC)

Figure 8. Overview of

SPC58NHADPT302S Rev. A mini

module - Top - C3

5V Switching voltage configuration:

• 1-2 5V EXT (External 5V supply)

• 2-3 MB_5.0V_SR (5V from mother board)

2-3

(MB_5.0V_SR)

Figure 8. Overview of

SPC58NHADPT302S Rev. A mini

module - Top - D4

VDD_HV_ADR_S / VDD_HV_ADV voltage configuration:

• 1-2 5V source from J1 pin2

• 2-3 3.3V_ADC source from J4 pin2

1-2

(5.0V_ADV)

Figure 8. Overview of

SPC58NHADPT302S Rev. A mini

module - Top - C3

3V3 source (3.3V and MB_3.3V_SR) voltage configuration:

• 1-2 3.3V (3.3V from Mini module)

• 2-3 MB_3.3V_SR

1-2

(3.3V)

Figure 8. Overview of

SPC58NHADPT302S Rev. A mini

module - Top - D3

Main mcu supply (VDD_HV_IO_MAIN) voltage configuration:

• 1-2 5.0V_SR (5.0V)

• 2-3 3.3V_SR from J4 pin2 (3.3V)

1-2

(5.0V_SR)

Figure 8. Overview of

SPC58NHADPT302S Rev. A mini

module - Top - D3

Supply for BALLAST circuit configuration

• 1-2 VDD_HV_IO_MAIN

• 2-3 5.0V_SR

1-2

(VDD_HV_IO_MAIN)

Figure 8. Overview of

SPC58NHADPT302S Rev. A mini

module - Top - D3

BALLAST CIRCUIT ENABLE

• Closed: enabled

• Open: disable

Closed

(enable)

Figure 8. Overview of

SPC58NHADPT302S Rev. A mini

module - Top - D2

VDD_LV voltage configuration:

• 2-3 (BALLAST circuit)

• 1-2 (1.2V_SR from J9 pin2)

1-2

(1.2V_SR)

Figure 8. Overview of

SPC58NHADPT302S Rev. A mini

module - Top - D3

1.2V_SR switching configuration:

• 1-2 MB_1.25V_SR (1.25V from MB)

• 2-3 1.2V (1.2V from Mini module)

2-3

(1.2V from Mini module)

Figure 8. Overview of

SPC58NHADPT302S Rev. A mini

module - Top - D3

J16

EXTREG_SEL configuration:

• 1-2 VDD_HV_IO_MAIN

• 2-3 GND

1-2

(H level)

Figure 8. Overview of

SPC58NHADPT302S Rev. A mini

module - Top - C3

J27

HPREG_SEL configuration:

• 1-2 VDD_HV_IO_MAIN

• 2-3 GND

1-2

(H level)

Figure 8. Overview of

SPC58NHADPT302S Rev. A mini

module - Top - B3

UM2725

Power and system configuration

UM2725 - Rev 1 page 7/38

5.2 JTAG/LFAST LVDS interface configuration

The following jumpers need to configure the JTAG/LFAST LVDS/SIPI:

Table 2. JTAG/LFAST/SIPI configuration jumpers

Jumper Description Default Position

J10

SIPI pin 3 configuration

• 1-2: RDY

• 2-3: PA14

1-2

(RDY)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - B3

J11

TDI_LF configuration

• 1-2: TDI_LF

• 2-3: PA8

1-2

(TDI_LF)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - A3

J12

TDO_LF configuration

• 1-2: TDO_LF

• 2-3: PA9

1-2

(TDO_LF)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - A3

J13

JTAG pin 13 configuration

• 1-2: EVTO

• 2-3: PJ3/PQ4

1-2

(EVTO)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - B3

J14

PC1 / ESR0

• 1-2 ESR0

• 2-3 PC1

1-2

(ESR0)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - B3

J15

EVTO/ESR0

• 1-2 ESR0

• 2-3 EVTO

1-2

(ESR0)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - B3

J31

EVIO/PK10

• 1-2 EVTI

• 2-3 PK10

1-2

(EVTI)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C3

J34

CLKOUT/PE3

• 1-2 PE3

• 2-3 CLKOUT

1-2

(ESR0)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - B3

UM2725

JTAG/LFAST LVDS interface configuration

UM2725 - Rev 1 page 8/38

5.3 System clock configuration

The mini module supports the usage of crystal clock sources as well as external clock source:

Table 3. Clock configuration jumpers

Jumper Description Default Position

J20

XTAL32 configuration

• Close: connect pin 2 of 32.768 KHz

crystal (Y2) to XTAL32

Open Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C3

J21

EXTAL32 configuration

• Close: Connect pin 1 of 32.768 KHz

crystal (Y2) to EXTAL32

Open Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C3

J17

EXTAL configuration

• 1-2 Connect pin 2 of 40 MHz crystal

(Y1) to EXTAL

• 2-3 Connect EVB-EXTAL to EXTAL

1-2

(Y1 pin2 to EXTAL)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C2

J19

XTAL configuration

• 1-2 Connect pin 1 of 40 MHz crystal

(Y1) to XTAL

• 2-3 Connect XTAL to GND

1-2

(Y1 pin1 to XTAL)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C2

J18

Enable 8 MHz oscillator power supply

• Open – Power off

• Closed – Power on

Open

(Power off)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C1

J22

External 8 MHz clock source

• 1-2 OSC-MOD (from oscillator)

• 2-3 EXTAL-SMA (from SMA

connector)

1-2

(8 MHz from oscillator)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C2

5.4 Reset circuit

The mini module supports different ways to reset the microcontroller. To use and perform the reset driving there

are different jumpers and switches:

Table 4. Reset configuration jumpers

Jumper Description Default Position

SW1 Reset push button Open Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - A4

J24 Connect the external reset to the reset

driver for ESR0 and PORST pins Close Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - A4

J23 Connect the external reset to ESR0 pin Close Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - A4

J25 Connect the external reset to PORST pin Close Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - A4

UM2725

System clock configuration

UM2725 - Rev 1 page 9/38

5.5 Other Jumpers

Table 5. Other jumpers

Jumper Description Default Position

J29 Testmode settings Close

(10 KΩ down)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - B2

5.6 Configuration for pin shared between eMMC & SD Card Reader

The following jumpers need to configure the pin shared between eMMC & SD Card Reader set the jumpers

described in the table below.

Table 6. Pin shared between eMMC & SD Card Reader jumpers

Jumper Description Default configuration Position

J26

Data0 – PJ3-EVTO configuration

• 1-2 D1_SD (SD-CARD)

• 2-3 D1_eMM (eMMC)

1-2

(SD-CARD)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C2

J30

Data1 - PJ4 configuration

• 1-2 D1_SD (SD-CARD)

• 2-3 D1_eMM (eMMC)

1-2

(SD-CARD)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C1

J32

Data2 - PH5 configuration

• 1-2 D2_SD (SD-CARD)

• 2-3 D2_eMM (eMMC)

1-2

(SD-CARD)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C1

J35

Data3 - PH6 configuration

• 1-2 D3_SD (SD-CARD)

• 2-3 D3_eMM (eMMC)

1-2

(SD-CARD)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C1

J28

CLK – PJ2 configuration

• 1-2 CLK_SD (SD-CARD)

• 2-3 CLK_eMM (eMMC)

1-2

(SD-CARD)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C2

J33

FBCLK - PJ0 configuration

• 1-2 FBCLK_SD (SD-CARD)

• 2-3 FBCLK_eMM (eMMC)

1-2

(SD-CARD)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C1

J36

CMD - PJ1 configuration

• 1-2 CMD_SD (SD-CARD)

• 2-3 CMD_eMM (eMMC)

1-2

(SD-CARD)

Figure 8. Overview of SPC58NHADPT302S Rev. A

mini module - Top - C2

UM2725

Other Jumpers

UM2725 - Rev 1 page 10/38

Table des matières

Autres manuels STMicroelectronics Carte mère

STMicroelectronics

STMicroelectronics STM32F4 Series Manuel utilisateur

STMicroelectronics

STMicroelectronics STSW-L9907-H Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32F756G-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics STR9 Series Manuel utilisateur

STMicroelectronics

STMicroelectronics L62 Series Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32F4 Series Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32F4 Series Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32F446RE Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32G081B-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics EVALSPEAr320CPU Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32100E-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics SPC58XCADPT176S Manuel utilisateur

STMicroelectronics

STMicroelectronics SPC570SADPT64S rev. B Manuel utilisateur

STMicroelectronics

STMicroelectronics STEVAL-ILL029V1 Manuel utilisateur

STMicroelectronics

STMicroelectronics STEVAL-IME008V1 Manuel utilisateur

STMicroelectronics

STMicroelectronics EVALSTGAP4S Manuel utilisateur

STMicroelectronics

STMicroelectronics ST7MDTULS-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics STEVAL-MKI109V2 Manuel utilisateur

STMicroelectronics

STMicroelectronics STEVAL-IDB005V1 Manuel utilisateur

STMicroelectronics

STMicroelectronics STEVAL-ISQ006V1 Manuel utilisateur

STMicroelectronics

STMicroelectronics STM3210E-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32439I-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics STM32L152D-EVAL Manuel utilisateur

STMicroelectronics

STMicroelectronics STEVAL-IHM029V1 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur