StarTech.com USBVGADOCK2 Manuel utilisateur

USB VGA Docking Station

4-in-1 USB to VGA Adapter and

Docking Station

USBVGADOCK2

Instruction Manual

Manual Revision:11/16/2010

For the most up-to-date information, please visit www.startech.com

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an

endorsement of the product(s) to which this manual applies by the third-party company

in question. Regardless of any direct acknowledgement elsewhere in the body of

this document, StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this

manual and related documents are the property of their respective holders.

Table of Contents

Introduction ..................................................................... 1

Packaging Contents.....................................................................1

System Requirements .................................................................1

Rear View ....................................................................................2

Side Views ...................................................................................2

Installation....................................................................... 3

Driver Installation.........................................................................3

Verifying Installation.....................................................................5

Conﬁguring the USB Video Adapter .............................. 6

Display ID ....................................................................................6

Display Resolution.......................................................................6

Display Rotation ..........................................................................7

Display Modes .............................................................................7

Identify Monitors ..........................................................................8

Multi-Display Control Panel .........................................................9

Display Settings...........................................................................9

Supported Video Resolutions ........................................ 10

Speciﬁcations.................................................................. 11

Technical Support........................................................... 12

Warranty Information...................................................... 12

Introduction

This USB to VGA adapter and docking station offers combined

functionality of a 4-in-1 docking station by converting a single USB 2.0

port into multiple connection ports, including a VGA Port, 10/100Mbps

RJ45 network port, dual (3.5mm mini-jack) audio ports and four

additional USB 2.0 ports.

Packaging Contents

• 1 x USBVGADOCK2 docking station

• 1 x Driver Installation CD

• 1 x Universal Power Adapter

• 3 x Interchangable Power Adapter Plug (NA/GB/EU)

• 1 x Instruction Manual

System Requirements

• CPU: Intel®/AMD®Single Core 1.5GHz or higher processor

• RAM: 512MB memory or higher

• USB 2.0 enabled computer system with available port

• Microsoft®Windows®XP/Vista/7 (32/64-bit)

Rear View

Side Views

RJ45 Ethernet

connector

VGA connector

USB 2.0

connector

USB Link LED

DC Power

connector

3.5mm mini-jack

Audio (Mic/Speaker)

USB mini-B

connector (Host)

Installation

* Please ensure that the driver installation is complete prior to

the physical installation of the USB 2.0 to VGA Docking Station

Driver Installation

1. Insert the Driver CD into your CD/DVD-ROM drive.

2. If the installation program does not begin automatically, locate the

Setup.exe application. This ﬁle will be located in the root directory of

the Driver CD.

3. Executing the Setup.exe

application will launch the

following screen. Please click

on Next:

*Ensure that the USB

Docking Station is not

connected to the host

computer.

4. Once the Windows

has ﬁnished the driver

installation, it will prompt

you to restart the computer.

Select “Yes, I want to

restart my computer now”,

and click the “Finish” button.

5. While the computer is restarting, connect the VGA cord running

from the secondary monitor/display to the Docking Station. Turn the

monitor/display on.

6. Connect the power adapter to the Docking Station and make sure

the power LED on the top of the unit lights up.

NOTE: The power adapter uses interchangable plugs for compatibility

with different regions (North America, Great Britian, Europe). Be sure

to use the proper plug for the receptacle you have.

7. Once Windows has fully loaded, plug the USB Docking Station into

an available USB 2.0 port of your PC or Notebook from the USB

mini-B connector.

8. A Hardware Installation

Wizard dialog will show up,

please select “No, not this

time” and click “Next” to

continue.

9. Please select “Install the

software automatically

(Recommended)”. And click

”Next” to continue.

10. Click “Finish” to complete the Hardware Wizard.

Verifying Installation

From the main desktop, right-click on “My Computer” (“Computer” in

Vista), then select Manage. In the new Computer Management window,

select Device Manager from the left window panel.

In the Device Manager view, ensure that the indicated devices are

present.

* actual device names may vary

Conguring the USB Video Adapter

Look for the USB Video Adapter icon ( ) on your Windows Start bar.

Right-click this icon to access the variety of functions associated to the

adapter.

NOTE: The Aero desktop theme is not supported by this adapter, so

should be disabled prior to use of the USB Video Adapter.

Display ID

The USB Video Adapter supports the

VESA deﬁned DDC/EDID standard.

The utility will show the display device

ID whenever it is attached to the USB

Video Adapter.

If there is no display device attached to the USB Video Adapter, an

“Unknown Monitor” ID will be shown. In some cases, if the attached

display device does not support EDID, the ID will also be deﬁned as

“Unknown Monitor”.

Display Resolution

Select the desired video display

resolution for the connected monitor.

The default setting resolution is:

1024 x 768 * 32bit.

Display Rotation

4 options available: “0°, 90°, 180°,

270° when used with the Extended

or Primary display modes. It is a

useful function for some rotatable

display devices.

Display Modes

“EXTENDED” DISPLAY MODE (DEFAULT)

A default display mode; this feature

allows the attached USB Video

Adapter enabled display to work as

an “Extended” display to the on-board

display. The extended working space

improves work efﬁciency.

You may change the relative position

of this extended display through the

Display Settings.

“MIRROR” DISPLAY MODE

This feature allows the same content

from the on-board display to be

duplicated (mirroring) to the USB

Video Adapter enabled display.

The screen resolution setting on

the USB Video Adapter enabled device will match the on-board

displays’s resolution. For example, if the on-board displays’s resolution

is 1024x768x32bit, and the USB Video Adapter will use the same

resolution.

Autres manuels pour USBVGADOCK2

Table des matières

Autres manuels StarTech.com Station d'accueil

StarTech.com

StarTech.com USB3DDOCKFT Manuel utilisateur

StarTech.com

StarTech.com SDOCKU33HW Manuel du système

StarTech.com

StarTech.com SDOCKU313E Manuel utilisateur

StarTech.com

StarTech.com SATADOCK525 Manuel du système

StarTech.com

StarTech.com SATDOCKU3S Manuel utilisateur

StarTech.com

StarTech.com DK31C2DHSPD Manuel utilisateur

StarTech.com

StarTech.com Thunderbolt 3 TB3DKM2DPL Manuel utilisateur

StarTech.com

StarTech.com SATDOCK22RU3 Manuel utilisateur

StarTech.com

StarTech.com DK30CHPH Manuel utilisateur

StarTech.com

StarTech.com SATDOCK25U Manuel utilisateur

StarTech.com

StarTech.com SATDOCKU3S Manuel utilisateur

StarTech.com

StarTech.com 8STSATDOCK5U3ER Manuel utilisateur

StarTech.com

StarTech.com USBVGADOCK Manuel utilisateur

StarTech.com

StarTech.com Thunderbolt 3 Series Manuel utilisateur

StarTech.com

StarTech.com TB3DKM2HDL Manuel utilisateur

StarTech.com

StarTech.com USB3DOCKH2DP Manuel utilisateur

StarTech.com

StarTech.com TB3DK2DPM2 Manuel utilisateur

StarTech.com

StarTech.com UNIDUPDOCK Manuel utilisateur

StarTech.com

StarTech.com SATDOCKU3SP Manuel utilisateur

StarTech.com

StarTech.com UNIDOCK3U Manuel utilisateur

StarTech.com

StarTech.com DK30CHDPD Manuel utilisateur

StarTech.com

StarTech.com 116N-USBC-DOCK Manuel utilisateur

StarTech.com

StarTech.com SATDOCK4U2E Manuel utilisateur

StarTech.com

StarTech.com SATDOCKU3E Manuel utilisateur

Manuels Station d'accueil populaires d'autres marques

Sony

Sony Dream Machine XDR-DS12iP Manuel utilisateur

Acer

Acer USB Type-C Dock II Manuel utilisateur

ATEN

ATEN UC-2000 Manuel utilisateur

Xcellon

Xcellon HDD-202 Manuel utilisateur

Dok

Dok CR09 Manuel utilisateur

Philips

Philips BTM630/12 Manuel utilisateur

IOGear

IOGear Travel Pro GUD3C09 Manuel utilisateur

RKI

RKI SDM-E2 Manuel utilisateur

iHome

iHome iP15 Manuel utilisateur

VITURE ONE

VITURE ONE MOBILE DOCK Manuel utilisateur

Lindy

Lindy 42984 Manuel utilisateur

CipherLab

CipherLab 8001 Manuel utilisateur

Pyle

Pyle PIPDSP2 Manuel utilisateur

Avol

Avol AS2350 Manuel utilisateur

Datalogic

Datalogic JoyaTouch Manuel utilisateur

Philips

Philips DC190/79 Manuel utilisateur

Targus

Targus DOCK315EUZ Manuel utilisateur

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuel utilisateur