StarTech.com PEXSAT32 Manuel utilisateur

Manual Revision: 07/11/2011

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

PEXSAT32

PEXESAT32

2-Port SATA 6Gbps PCI Express Controller

2-Port eSATA 6Gbps PCI Express Controller

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and

Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction ............................................................................................1

Packaging Contents ................................................................................................................................. 1

System Requirements .............................................................................................................................. 1

PEXSAT32 View ........................................................................................................................................... 2

PEXESAT32 View ........................................................................................................................................ 2

Installation ..............................................................................................3

Hardware Installation .............................................................................................................................. 3

Driver Installation ...................................................................................................................................... 3

Verifying Installation ................................................................................................................................ 4

How to Use ..............................................................................................5

RAID Conguration .................................................................................................................................. 5

Specications ..........................................................................................6

Technical Support ..................................................................................7

Warranty Information ............................................................................7

Instruction Manual

Introduction

The StarTech.com 2-Port PCI Express 6Gbps eSATA or SATA Controller Cards oers

simple connectivity between a host computer system and eSATA or SATA revision

3.0 devices. A cost-eective solution for connecting high RPM hard drives and Solid

State Drives (SSD), which in turn allows for easier data backups and archiving. With full

support for SATA revision 3.0 hard drives and data transfer speeds of up to 6 Gbps, as

well as backwards support for SATA revision 2.0 (3.0 Gbps) devices, the adapter card

features a native PCI Express single chip design that provides enhanced compatibility,

reliability and performance.

Packaging Contents

• 1 x 2-port SATA 6Gbps controller

1 x 2-port eSATA 6Gbps controller card

• 1 x Low Prole bracket

• 1 x Driver Installation CD

• 1 x Instruction Manual

System Requirements

• PCI Express enabled computer system with available PCIe card slot

• Microsoft® Windows® XP/Server 2003/Vista/Server 2008 R2/7 (32/64-bit), or Linux®

Instruction Manual

PEXESAT32 View

PEXSAT32 View

Instruction Manual

Installation

WARNING! PCI Express cards, like all computer equipment, can be severely

damaged by static electricity. Be sure that you are properly grounded before

opening your computer case or touching your PCI Express card. StarTech.com

recommends that you wear an anti-static strap when installing any computer

component. If an anti-static strap is unavailable, discharge yourself of any

static electricity build-up by touching a large grounded metal surface (such

as the computer case) for several seconds. Also be careful to handle the PCI

Express card by its edges and not the gold connectors.

Hardware Installation

1. Turn your computer o and any peripherals connected to the computer (i.e. Printers,

external hard drives, etc.). Unplug the power cable from the rear of the power

supply on the back of the computer.

2. Remove the cover from the computer case. See documentation for your computer

system for details.

3. Locate an open PCI Express slot and remove the metal cover plate on the rear of the

computer case (Refer to documentation for your computer system for details.). Note

that this card will work in PCI Express slots of additional lanes (i.e. x4, x8 or x16 slots).

OPTIONAL: if installing the card into a low prole system, remove the full height

bracket on the card and replace with the included low prole bracket.

4. Insert the card into the open PCI Express slot and fasten the bracket to the rear of

the case.

OPTIONAL: if connecting external LED indicators to the card, connect the 2x4-pin

header on the card to the LEDs.

5. Place the cover back onto the computer case.

6. Insert the power cable into the socket on the power supply and reconnect all other

connectors removed in Step 1.

Driver Installation

Windows XP/Server 2003/Vista/Server 2008 R2

1. After installing the card into the computer system, boot up the computer.

2. Once logged into Windows, the Hardware/Driver installation wizard should appear.

Insert the Driver Installation CD into the CD/DVD drive when prompted.

3. Windows should automatically start to search the CD for the appropriate drivers.

This may take several minutes.

Instruction Manual

4. Once Windows has located the drivers and installed them, the card should be ready

for use.

Windows 7

No driver installation is required for Windows 7, as the controller card is natively

supported, so the drivers are already installed.

Verifying Installation

Windows XP/Server 2003/Vista/Server 2008 R2/7

From the main desktop, right-click on “My Computer” (“Computer” in Vista or later),

then select “Manage”. In the new Computer Management window, select Device

Manager from the left window panel.

Under the “SCSI and RAID Controllers” category (“Storage Controllers” in Vista or later),

should be a “Marvell 91xx” device. Right-click on the device and select “Properties” to

make sure it is installed and working correctly.

For Windows 7, if using the native drivers, the card will instead be listed under the “IDE

ATA/ATAPI Controller” category as a “Standard AHCI” device.

Instruction Manual

How to Use

RAID Conguration

To setup a RAID array using the drives connected to the SATA controller card, the

BIOS level conguration menu must be accessed. To access the conguration menu,

during POST (computer startup), the status display for the controller card will display.

When prompted, pressing [CTRL] + [m] will enter the conguration menu. From the

conguration menu, the detected drives can be congured into any of the supported

RAID modes by following the on screen prompts.

Instruction Manual

Specications

Bus Interface

PCI Express rev 2.0*

(x1 connector)

SATA rev 3.0

Form Factor Full/Low Prole

Chipset ID Marvell 9128

Connectors 2 x 7-pin eSATA (PEXESAT32)

2 x 7-pin SATA (PEXSAT32)

Maximum Data Transfer Rate SATA: 6 Gbps

RAID Support 0, 1, JBOD (single)

Operating Temperature 5°C ~ 50°C (41°F ~ 122°F)

Storage Temperature -25°C ~ 70°C (-13°F ~ 158°F)

Humidity 15 ~ 90% RH

Compatible Operating Systems Windows XP/Server 2003/Vista/Server

2008 R2/7 (32/64-bit), Linux

Instruction Manual

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a lifetime warranty.

In addition, StarTech.com warrants its products against defects in materials

and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with

equivalent products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels StarTech.com Matériel informatique

StarTech.com

StarTech.com SAT32M225 Manuel utilisateur

StarTech.com

StarTech.com 1P3FFCB-USB-SERIAL Manuel utilisateur

StarTech.com

StarTech.com SATSASBAY3BK Manuel utilisateur

StarTech.com

StarTech.com PEXUSB311EI Manuel utilisateur

StarTech.com

StarTech.com PEXUSB312A Manuel utilisateur

StarTech.com

StarTech.com 4PCIE-PCIE-ENCLOSURE Manuel utilisateur

StarTech.com

StarTech.com PCI1S950DV Manuel utilisateur

StarTech.com

StarTech.com CB1394B3 Manuel utilisateur

StarTech.com

StarTech.com CARDBUS CB420USB Manuel utilisateur

StarTech.com

StarTech.com SM22BU31C3R Manuel utilisateur

StarTech.com

StarTech.com VS421HD4K Manuel utilisateur

StarTech.com

StarTech.com 8STECUSB3S254F Manuel utilisateur

StarTech.com

StarTech.com MPEX1394B3 Manuel utilisateur

StarTech.com

StarTech.com PEX4S553B Manuel utilisateur

StarTech.com

StarTech.com FANK8AM2 Manuel utilisateur

StarTech.com

StarTech.com PEX4S953 Manuel utilisateur

StarTech.com

StarTech.com VSEDIDHD Manuel utilisateur

StarTech.com

StarTech.com EC13941A1B Manuel utilisateur

StarTech.com

StarTech.com EC13942 Manuel du système

StarTech.com

StarTech.com PCI225USB Manuel

StarTech.com

StarTech.com 8STHSB220SAT25B Manuel utilisateur

StarTech.com

StarTech.com PEXSAT34RH Manuel utilisateur

StarTech.com

StarTech.com EC4S950 Manuel utilisateur

StarTech.com

StarTech.com CMVBMOD Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur