Star Micronics SLIP SP298 SERIES Manuel utilisateur

Autres manuels pour SLIP SP298 SERIES

2

Table des matières

Autres manuels Star Micronics Imprimante

Star Micronics

Star Micronics TSP700II Series Manuel utilisateur

Star Micronics

Star Micronics LC-90 Manuel utilisateur

Star Micronics

Star Micronics Delta Manuel utilisateur

Star Micronics

Star Micronics NX-1020 Manuel utilisateur

Star Micronics

Star Micronics SP312F Manuel utilisateur

Star Micronics

Star Micronics DP8340RC Series Manuel utilisateur

Star Micronics

Star Micronics NP-345 Instructions d'installation

Star Micronics

Star Micronics SB-10 Manuel utilisateur

Star Micronics

Star Micronics TSP1000 Series Instructions d'installation

Star Micronics

Star Micronics LC24-20 Manuel utilisateur

Star Micronics

Star Micronics DP-8340 FM-120 Manuel utilisateur

Star Micronics

Star Micronics DP8340R Series Manuel utilisateur

Star Micronics

Star Micronics LC24-15 Manuel utilisateur

Star Micronics

Star Micronics NL-10 Manuel utilisateur

Star Micronics

Star Micronics Star SCP700 Series Manuel d'utilisation et d'entretien

Star Micronics

Star Micronics SP317 Manuel utilisateur

Star Micronics

Star Micronics TSP600 Series Manuel

Star Micronics

Star Micronics SP500 Series Manuel du propriétaire

Star Micronics

Star Micronics SLIP SP298 SERIES Manuel utilisateur

Star Micronics

Star Micronics SM-L300 Guide de démarrage rapide

Star Micronics

Star Micronics NX-15 Manuel utilisateur

Star Micronics

Star Micronics SP500 Series Manuel utilisateur

Star Micronics

Star Micronics DP8340 Series Manuel utilisateur

Star Micronics

Star Micronics TSP043E Series Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

Removing the protective materials

Fourprotectivematerialsareinsertedintotheprintertoprotectcomponentsduring

shipping. Before using the printer, be sure to remove all protective materials as

shown in the illustration.

❏Remove the two pieces of protective tape.

❏Pull the protective sheet straight out toward the front of the printer.

❏Push in the side of the printer cover and lift it upward to remove it.

❏Remove the packing materials.

Note that it is a good idea to keep all protective materials in case you will need to

pack the printer up again and send it somewhere at a later date.

SP298 80871055

Printer cover

Packing

material

Protectivesheet

Protective tape

Protective tape

CAUTION

AutoSide Loading™

This printer is equipped with paper sensors, so you do not have to perform any

special procedure to align the location from which printing should start. Simply

insert the paper into the printer and the sensor locates the top of the paper. The

paper will be moved automatically into position for printing.

❏Make sure that the printer is plugged in and turned on.

❏Check that the RELEASE indicator on the control panel is lit. If the indicator is

not lit, press the RELEASE button until the indicator lights up.

❏Place a piece of the paper onto the printer's document table and slide its right

edge into the printer. Printing will be performed on the side of the paper that is

facing up (the one you can see), starting from the top of the paper.

Important!

•Do not use wrinkled or curled paper. In case of multiple paper, neatly align the

sheets.

•When inserting the paper into the printer, make sure that there are at least 3 cm

between the top edge of the paper and the print start position mark on the printer.

Otherwise the paper sensor may not be able to correctly locate the top of the

paper.

❏Push the right edge of the paper into the printer until it stops. At that time, the

PAPER OUT indicatorwillgoout,andtheprinter mechanism will automatically

align the paper for printing from the top.

❏Send data from your host computer to be printed on the paper.

At least 3cm

Print start position mark