Star Micronics TSP600 Series Manuel utilisateur

THERMAL PRINTER

TSP600 Series

TECHNICALMANUAL

[FIRST EDITION]

NOTICE

•Allrightsreserved.Reproductionofanypartofthismanualinany

form whatsoever, without STAR’s express permission is forbid-

den.

•The contents of this manual are subject to change without notice.

•All efforts have been made to ensure the accuracy of the contents

of this manual at the time of going to press. However, should any

errors be detected, STAR would greatly appreciate being in-

formed of them.

•The above notwithstanding, STAR can assume no responsibility

for any errors in this manual.

INTRODUCTION

This manual describes the thermal printer TSP600 series.

It is designed for use as a reference for periodic inspections and maintenance procedures to be executed

by service personnel. It is not intended for the general user. Users of this manual should have a basic

knowledge and understanding of the English language.

•This manual is divided into the following sections:

Chapter 1 Parts Replacement and Adjustments

Chapter 2 Maintenance and Lubrication

Chapter 3 Parts List

•First edition : Jul. 2001

CHAPTER 1

PARTS REPLACEMENT

This chapter explains disassembly and reassembly of the printer. Note the following precautions during

disassembly and reassembly.

1. Disconnect the printer power cord plug from the wall outlet before servicing it.

2. Assembly is the reverse of disassembly unless otherwise specified.

3. After reassembly, coat the screw heads with locking sealant.

4. Lubrication information is not provided in this chapter. Refer to item 2 of chapter 2.

5. The printer has no adjustable parts.

1. Rear Cover Unit .....................................................................................................3

2. Case Unit................................................................................................................3

3. Board Chassis Unit ...............................................................................................4

4. Main Logic Board ..................................................................................................4

5. Printer Mechanism ................................................................................................5

6. Motor Unit ..............................................................................................................5

– 3 –

PARTS REPLACEMENT

1. Rear Cover Unit

(1) Turn off the power switch 1, disconnect the power

cord from the wall outlet.

(2) Push the cover open lever 2and open rear cover

unit 3.

(3) Allowingabout5mmofuniformslackeningatpoints

A (left/right) of the rear cover unit 3, along the

arrow direction, remove it from case unit.

(4) Remove front cover 4.

2. Case Unit

(1) Turn off the power switch, disconnect the power

cord from the wall outlet.

(2) Remove the rear cover unit according to the

procedure described in item 1.

(3) Remove

•Four screws 1

•Case unit 2

– 4 –

PARTS REPLACEMENT

3. Board Chassis Unit

(1) Turn off the power switch1, disconnect the power

cord from the wall outlet.

(2) Remove

•Case unit according to the procedure described

in item 2.

•Three screws 2

•Five connectors 3

•Mechanism chassis unit 4

•Board chassis unit 5

4. Main Logic Board

(1) Turn off the power switch, disconnect the power

coard from the wall outlet.

(2) Remove

•Board chassis unit according to the procedure

described in item 3.

•Two screws 1

•Interface board unit 2

•Four screws 3

•Main logic board 4

•Board chassis 5

–5 –

PARTS REPLACEMENT

5. Printer Mechanism

(1) Turn off the power switch, disconnect the power

cord from the wall outlet.

(2) Remove

•Mechanismshassisunitaccordingtotheprocedure

described in item 3.

•Three screws 1

•Paper stocker 2

•Screw 3

•NE lever unit 4

•Three screws 5

•Printer mechanism 6

•Mechanism chassis 7

6. Motor Unit

(1) Turn off the power switch, disconnect the power

cord from the wall outlet.

(2) Remove

•Printer mechanism according to the procedure

described in item 5.

•Release the two hooks 1and remove cutter unit

2(Auto cutter model only)

•Two screws 3

•Motor unit 4

Autres manuels pour TSP600 Series

Table des matières

Autres manuels Star Micronics Imprimante

Star Micronics

Star Micronics NX-1000 Manuel utilisateur

Star Micronics

Star Micronics NL-10 Manuel utilisateur

Star Micronics

Star Micronics Star SCP700 Series Manuel d'utilisation et d'entretien

Star Micronics

Star Micronics LC-1021 Manuel utilisateur

Star Micronics

Star Micronics TSP100LAN Manuel utilisateur

Star Micronics

Star Micronics NP-255 Instructions d'installation

Star Micronics

Star Micronics SP312F Manuel utilisateur

Star Micronics

Star Micronics TSP552 Manuel utilisateur

Star Micronics

Star Micronics SP500 Series Manuel du propriétaire

Star Micronics

Star Micronics SP500 Series Instructions de montage

Star Micronics

Star Micronics TSP200 Series Manuel utilisateur

Star Micronics

Star Micronics FR-10 Manuel utilisateur

Star Micronics

Star Micronics Star DP8340 Manuel utilisateur

Star Micronics

Star Micronics TSP700 Series Manuel utilisateur

Star Micronics

Star Micronics SM-S200 Series Instructions de montage

Star Micronics

Star Micronics TSP143IIU Manuel utilisateur

Star Micronics

Star Micronics LC-7211 Manuel utilisateur

Star Micronics

Star Micronics 10X Manuel utilisateur

Star Micronics

Star Micronics LaserPrinter4 Manuel utilisateur

Star Micronics

Star Micronics SP500 Series Manuel utilisateur

Star Micronics

Star Micronics TSP143IIIBI Manuel utilisateur

Star Micronics

Star Micronics NX-1500 Manuel utilisateur

Star Micronics

Star Micronics LC-20 Manuel utilisateur

Star Micronics

Star Micronics LC24-15 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur