Star Micronics SG-10 Manuel utilisateur

SG -1O/l 5

USER’S MANUAL

NOT INTENDED FOR SALE

Federal Communications Commission

Radio Frequency Interference

Statement

The equipment generates and uses radio frequency energy and if not installed and used

properly, that is, in strict accordance with the manufacturer’s instructions, may cause in-

terference to radio and television reception. It has been type tested and found to comply

with the limits for a Class Bcomputing device in accordance with the specifications in Subpart

J of Part 15of FCC Rules, which are designed to provide reasonable protection against such

interference in a residential installation. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause interference to radio

or television reception, which can be determined by turning, the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

*Reorient the receiving antenna

lRelocate the computer with respect to the receiver

@Move the computer away from the receiver

*Plug the computer into a different outlet so that computer and receiver are on different

branch circuits

If necessary, the user should consult the dealer or an experienced redio/television technician

for additional suggestions. The user may find the following booklet prepared by the Federal

Communications Commission helpful: “How to Identify and Resolve Radio-TV Interference

Problems.” This booklet is available from the U.S. Government Printing Office, Washington,

D.C., 20402, Stock No. 004-000-00345-4.

For compliance with Federal Noise Interference Standard, this equipment requires a shielded

cable.

A note about the programs in tlds manual

This manual contains several programs that help to demonstrate the versatility of the

SG-lo/15 printers. Star Mfg. Co., Ltd. has made every effort to insure that the programs

are functional and accurate. However, Star Mfg. Co., Ltd. cannot guarantee their accuracy

or suitability to any particular application.

Trademark Acknowledgement

SGlO, SG15: Star Mfg. Co., Ltd.

grfstar: Star Micronics

Apple, Apple II, Apple II + , Apple IIe, Applesoft: Apple computer Inc.

Commodore C-6& Commodore Business Machines, Inc.

Compaq: Compaq Computer corporation

CP/M: Digital Research

EasyWriter: Information Unlimited Software, Inc.

IBM Persouel Computer, IBM PC, IBM XT: International Business Machines Corp

Kaypro: Kaypro Computer Corporation

Microsoft BASIC: Microsoft Corporation

Osborne 1: Osborne Computer Corporation

SuperCalc: Sorcim Corporation

‘IRS-80: Radio Shack, a division of Tandy Corporation

WordStar: MicroPro International Corporation

A Special Message

to the New Owner

Congratulations on your selecting the printer of choice for

both the sophisticated as well as the first-time user/owner - the

new SG-10/1.5!

To complement the SG-10/15, we’ve included this manual.

All the information you need to be up and running with your

new SG- 10/l 5 is right here!

You’ll find using this manual easy and pleasant. We’ve gone

to great length to make it so, as it’s master-minded by solid experts

in the art of computer science, and written by professionals ex-

perienced in presenting technical subjects accurately - and in

Plain English!

As an example, look over the Table of Contents and you’ll

see what we mean. Whether you’re a greenhorn or a technical

wizard, everything you need to know in order utilize to SG- 10/l 5’s

wealth of features can be found there. We suggest that each new

owner/user take time to at least scan Chapter 2 and 3 - “Getting

to Know Your SG-10/15” and “Getting Started With

SG-10/15”- as well as Chapter 1, “Setting Up SG-10/15”, to

become familiar with your SG-lo/15 and how it works.

When you’re ready to connect your computer to your

SG- 10/l 5, look at Appendix J for directions applying to your

make of computer.

For you who wish to design your own characters, do your

own plotting, your own infinite variety of dot graphic patterns

and densities, you’ll have a ball! For you, Chapters 5 through

10 are a must, and of course everybody should look at Chapter

11, which tells how to maintain your SG- 10/l 5 for a long and

carefree life.

In this manual there are plenty of example programs to de-

monstrate and show off all of SG-10/15’s features. Since many

SG- 10/l 5 users have IBM Personal Computers (or the equivalent)

all the example programs are written in Microsoft BASIC for

the IBM. But throughout the manual, users of other computers

will find hints on how to make SG-lo/15 work with their com-

puter.

So, gentle reader, with this manual we hand you the key to

the wonderful world of SG-10/15. May you enjoy years of

handsome, fast, and carefree printing!

Table of Contents

Chapter 1

Chapter 2

Setting Up SG-lo/15 1

Where Shall We Put It?

What Have We Here?

Removing the printer cover

Removing packing and shipping screws

Installing the platen knob

Removing the tractor unit

Attaching the paper separator and paper guide

Installing the ink ribbon

Getting to Know Your SG-lo/15 9

Components and Controls

Paper Selection and Loading

Loading single sheets

Loading sprocket-feed paper

Bottom feeding SG- 15

Adjusting the Gap

Self-Test

Chapter 3

Chapter 4

Getting Started With SG-lo/15 23

Using Commercial Software

First, some terminology

Using SG- lo/ 15 with SuperCalc

Using SG-IO/15 with word processors

Using this book without learning BASIC -

Controlling SG10/15 With BASIC 29

Some Basics About BASIC

Establishing communications

The CHR$ function

Control codes

The escape code

Chapter 5

Some problem codes

Command Syntax Used in This Manual

Selecting The Right Software Mode

Printing Text With SG-lo/15

Some Special Kinds of Text

Near Letter Quality characters

Italic printing

Underlining

Superscripts and subscripts

Changing the Print Pitch

Expanded print

Making SG-lo/15 Print Darker

Mixing Modes

Summary

Chapter 6 Line Spacing and Forms Control 49

Starting New Lines

Changing Line Spacing

Moving down the page without a carriage mturn

Forms Controls

Form feed

Changing the Page Length

Top and Bottom Margins

Summary

Chapter 7

Chapter 8

Formatting Your Output

Using Horizontal Tabs

A one-shot tab command

Setting Left and Right Margins

Using Vertical Tabs

A one-shot vertical tab command

Summary

Special Features of the SG10/15

Now hear this

Initializing SG-lo/15

Putting SC-lo/l 5 to sleep

Printing to the bottom of the sheet

Backspace, delete, and cancel text

“Zero” printing

Unidirectional printing

The seven bit dilemma

Block graphics characters and special symbols

International character sets

The macro control code

Summary

Chapter 9 Creating Your Own Characters

Dot Matrix Printing

The Print Matrix

Defining Your Own Characters

Rule 1: Download characters are eight dots high

Rule 2: Dots cannot overlap

Add up each column of dots

Assigning a value to your character

Download character definition command

Printing Download Characters

Chapter 10

Chapter 11

Appendix A

Appendix B

Appendix C

Appendix D

Appendix E Command Summary in Numeric Order 197

Appendix F ASCII Code Conversion Chart 201

Appendix G Technical Specifications 209

Erasing Download Character Definitions

Delining Proportional Characters

Connecting characters

Summary

Printing With Dot Graphics 103

Comparing Dot Grapphics With Download

Characters

Using the Dot Graphics Commands

Specifying the number of columns of dots

Specifying the graphics data

Combining text and graphics

Printing a Design or Logo

Plotting With SG-lo/15

How the program works

High Resolution Graphics

If You Have Problems With BASIC

Summary

Basic Maintenance

Cleaning SG- lo/ 15

Replacing a Fuse

Replacing the Print Head

DIP Switch Settings

Switch Functions

ASCII Codes

Character Style Charts

121

125

129

137

155

Function Code Reference

Commands to Control Print Style

Front style controls

Font pitch controls

Special print modes

Commands to Control Vertical Position of

Print Head

Line feed controls

Form feed controls

Vertical tabs

Commands to Control Horizontal Position of

Print Head

Download Character Commands

Commands to Control Graphics

Macro Instruction Commands

Other Commands

Appendix H

Appendix I

Appendix J

The Parallel Interface

Functions of the Connector Signals

Serial Interface Specifications

Configuring the Serial Interface

SC- lo/ 15’s Serial Protocols

Serial busy protocols

XON/XOFF protocol

ACK protocol

213

217

Connecting With Computer

Connecting with IBM-PC and Compaq

BASIC programming

Listing programs

Connecting with Apple II computers

Applesoft BASIC

Listing programs

Connecting with TRS-80 computers

TRS-80 BASIC

Listing programs

Connecting with Kaypro, Osborne, and

other CP/M computers

Using MBASIC

Listing programs

DIP Switch Quick Reference 231

Command Quick Reference 232

Consumer Response 236

223

Table of Tables

Table 5-l Near letter quality commands

Table 5-2 Italic commands

Table 5-3 Underline commands

Table 5-4 Superscript and subscript commands

Table 5-5 Print pitch commands

Table 5-6 Expanded print commands

Table 5-7 Print emphasis commands

Table 5-8 Master select and the 256 ASCII codes

Table 6-l Line feed commands

Table 6-2 Line spacing commands

Table 6-3 Form length commands

Table 6-4 Top and bottom margin commands

Table 7-1 Horizontal tab commands

Table 7-2 Left and right margin commands

Table 7-3 Vertical tab commands

Table 8-1 Bell commands

Table 8-2 Some miscellaneous commands

Table 8-3 Printing direction commands

Table 8-4 Eight bit control commands

Table 8-5 International character set commands

Table 8-6 International character sets

Table 8-7 Macro instruction commands

Table 9-1 Download character commands

Table 10-l Calculating nl and n2

Table 10-2 Dot graphics commands

Table A-l DIP switch settings

Table A-2 International character sets

Table H-l Parallel interface pin functions

Table I-l Serial interface pin functions

Table I-2 DIP switch on the serial board

Table I-3 Handshaking protocols

Table I-4 Data transfer rates

Table J-l IBM-PC parallel cable

Table J-2 Apple parallel cable

Table J-3 TRS-80 Model I parallel cable

Table J-4 TRS-80 Model II parallel cable

Table J-5 Kaypro parallel cable

Table J-6 Osborne 1 parallel cable

39 -

t: -

ii:

105

116 --

126

128

215 - -

218

219

223

225

227

229 .~

229

CHAPTER 1

SETTING UP SC-lo/l5

In this chapter, we’ll show you how to unpack your new

SG-lo/15 printer, set it up in the right location, and get it ready

for you to load it with paper and start printing. But first . . .

WHERE SHALL WE PUT IT?

Before you do anything else, give some thought to where you’ll

be using your printer. Obviously, it will be somewhere near your

computer. And both printer and computer will lead longer,

healthier lives if they like their environment. For instance, we

recommend . . .

l Placing the printer on a flat surface

l Keeping it out of direct sunlight and away from

heat-producing appliances

l Using it only in temperatures where you are comfortable

l Avoiding areas with a lot of dust, grease, or humidity

l Giving it “clean” electricity. Don’t connect it to the same

circuit as large, noise-producing motors

l Power supply voltage should be the same voltage that’s

specified on the identification plate - not over 10% more

or less than the recommended AC voltage.

Warning: Extremely high or low voltage can damage your

printer.

WHAT HAVE WE HERE?

Now let’s take a look at what’s in the carton. Take it slow and

easy, and check each item in the box against Figure l-l. There

should be exactly 7 items.

Figure l-l. Inside the carton you should have received: 1) SG-lo/15

printer, 2) paper separator, 3) paper guide, 4) platen knob, 5) spare fuse,

6) ink ribbon, and 7) this user’s manual.

Let’s move on the next step . . . --

H Removing the printer cover

What is cover for, really? Primarily, for two reasons: one, to

keep dust and dirt away from the delicate “innards,” and two,

to keep the noise level down. So, you should keep the cover on

all the time, except when setting the ink ribbon in place, loading

paper. or making other adjustments when the cover might be in

the way.

To remove the printer cover, lift up the front end, and pull

out the two tabs at the back edge of the cover from the two slots

of the case, and off the machine. To replace, just reverse the

procedure. Figure l-2 illustrates the proper position and

movement for both removal and replacement of the cover.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Star Micronics Imprimante

Star Micronics

Star Micronics SM-T300I SERIES Manuel utilisateur

Star Micronics

Star Micronics LC-500 Manuel utilisateur

Star Micronics

Star Micronics futurePRNT TSP100 Manuel utilisateur

Star Micronics

Star Micronics Multi-Font XR-1000 Manuel utilisateur

Star Micronics

Star Micronics SP300 Series Manuel utilisateur

Star Micronics

Star Micronics SLIP SP298 SERIES Manuel d'utilisation et d'entretien

Star Micronics

Star Micronics LS-5 SERIES Manuel utilisateur

Star Micronics

Star Micronics TUP900 Series Guide de configuration rapide

Star Micronics

Star Micronics SP349 Manuel utilisateur

Star Micronics

Star Micronics TUP592 Manuel utilisateur

Star Micronics

Star Micronics NX-2460C Manuel utilisateur

Star Micronics

Star Micronics ND-10/15 Manuel utilisateur

Star Micronics

Star Micronics TSP400 Series Manuel utilisateur

Star Micronics

Star Micronics TSP2000 Series Manuel utilisateur

Star Micronics

Star Micronics SJ-144MC Manuel utilisateur

Star Micronics

Star Micronics TSP743II Series Manuel utilisateur

Star Micronics

Star Micronics TSP1000 Series Manuel

Star Micronics

Star Micronics TSP700 Series Manuel utilisateur

Star Micronics

Star Micronics MULTI-FONT NX-1000II Manuel utilisateur

Star Micronics

Star Micronics LC-7211 Manuel utilisateur

Star Micronics

Star Micronics NX-1000 Manuel utilisateur

Star Micronics

Star Micronics SF-10HA Manuel utilisateur

Star Micronics

Star Micronics TSP700II Series Manuel utilisateur

Star Micronics

Star Micronics NX-10 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur