Stack-On SHD-AOTT-BG-E Manuel utilisateur

40716-1705 116

Your Electronic Safe Combination:

Serial #:

• Record the serial number from the tag on the

back of the safe or the tag on the inside of the

lock cover plate on the front of the safe

• Record your combination number

NOTE: You can store your Key #, Serial # and

Combination on Stack-On’s SECURE website –

stackon.com under Customer Service.

Storing your Key # or Combination will provide

instant access to this important information should

you ever lose your keys or your combination.

Only you will have access to this information.

• Keep keys and combination in a secure place

away from children

• DO NOT STORE KEYS OR YOUR

COMBINATION INSIDE SAFE

INSTRUCTIONS

SHD-AOTT-BG-E

Battery Disposal

Please dispose the used batteries per municipal

or provincial law.

1. Electronic Lock

2. Key Lock

3. Battery Compartment (inside safe)

4. Reset Button (inside safe)

INSIDE SAFE DETAIL

(4) M6 x 50 mm (2” long) Lag Screws

(4) Washers

(4) M6 x 40 mm (1-1/2” long) Plasc Masonry Anchors

Drill

Thin Bladed Flat Head Screwdriver

10 mm Wrench

3/8” (9.5 mm) masonry drill bit for drilling into masonry

3/16” (5 mm) drill bit for drilling into wood and wall studs

HARDWARE INCLUDED:

TOOLS REQUIRED:

CONTROL FEATURES

IMPORTANT

40716-1705 216

GETTING STARTED

3. Battery Compartment (inside safe)

INSIDE SAFE DETAIL

Battery

Compartment

NOTE: Do not mix old and new baeries. Do not

mix alkaline, standard or rechargeable baeries.

This safe uses 4 - AA baeries. Under normal

use, baeries will last about 1 year.

NOTE: If the baeries are low, the yellow light

will ﬂash when you press the keypad.

BATTERY INSTALLATION

When you ﬁrst receive your safe you will

need to open the door with the key in order

to install the baeries. Baeries are

included and are located inside the safe.

To open the door with the key, ﬁrst remove

the lock cover from the front of the faceplate

using a thin bladed ﬂathead screwdriver.

Insert the key and turn clockwise.

The door will open automacally when the

key is in the open posion.

Locate the baeries inside the safe. Open the

baery compartment on the back of the door

by pushing the tab in the direcon of the

arrow and install the baeries. The light will

ﬂash green with one beep if baeries are

installed correctly.

NOTE: The reset buon located on the inside

of the door, is covered with a removable cap.

When you use the reset buon while

recording your combinaon, remove the cap

to access the buon. Use a pen p to push

the reset buon.

Replace the cap securely over the reset

buon aer recording your Combinaon.

Failure to do so will compromise the safety

and security of the safe.

NOTE: You must turn the key back to the

locked posion before you can record a

combinaon, close and lock the door.

NOTE: This key has also been provided in case

the baeries run low. If you lose your key, you

may purchase a replacement key by referencing

the serial number located under the removable

lock cover. See secon at the end of this

instrucon regarding replacement keys.

Reset Button

40716-1705 316

ENTERING YOUR SECURITY CODE

When you open the safe in the future enter the

security code you have set followed by

the .... key.

If an incorrect security code is entered 3 mes

the safe will beep 5 mes (if the sound is turned

on) and the red light will ﬂash 5 mes resulng

in the safe being automacally locked out for

60 seconds before you can try your code again.

The safe will beep 1 me (if the sound is turned

on) and the green light will ﬂash once when the

lockout period is over.

If an incorrect security code is entered

1 addional me the safe will beep 5 mes

(if the sound is turned on) and the red light will

ﬂash 5 mes resulng in the safe being

automacally locked out for 5 minutes before

the code can be tried again. The safe will beep

1 me (if the sound is turned on) and the green

light will ﬂash once when the lockout

period is over.

Write your new combinaon on this form or

store your combinaon on our secure website at

stackon.com under Customer Service. If you

write down your combinaon you must keep this

informaon in a secure place, away from

children, not inside the safe.

To enter your own security code you will need to

follow the steps listed below:

1. Aer installing the baeries, locate the reset

buon on the back of the door.

2. With the safe door open, the key must be in

the locked posion - you can not program the

keypad if the key is in the unlocked posion.

3. Press the reset buon with a pen and then

release it. The light will ﬂash green

with one beep

4. With the door open, enter your own personal

security code, which can be 3-8digits long, and

conﬁrm your new code by pressing the ....

key on the electronic touch pad. You will have

3 seconds to press the .... key otherwise you

will have to start over from step one. There will

be 2 beeps (if the sound is turned on) and the

green light will ﬂash twice if your code has been

entered successfully. Before you close the door,

enter the new security code and press the ....

key to make sure the lock bolts retract.

If the code fails, go through steps 2 - 4 again.

If the code works successfully, then you should

lock the safe.

OPENING THE SAFE

LOCKING THE SAFE

NOTE ON LOCKING THE SAFE: Because the

locking mechanism is deacvated for

approximately 3 to 6 seconds aer the

combinaon is entered, wait a minimum of

6 seconds from the me the combinaon is

entered to lock the safe.

When operang the lock with the key, you must

turn the key back to the locked posion before

you are able to close and lock the safe door.

NOTE: DO NOT SHUT THE DOOR UNTIL YOU

HAVE CONFIRMED THAT YOUR COMBINATION

HAS BEEN ENTERED CORRECTLY.

40716-1705 416

TURNING THE KEYPAD SOUND

OFF/ON

You can turn oﬀ the "Beep" sound of the

keypad by pressing the ... key.

To turn the "Beep" sound on, press the

.... key again.

Your safe comes with the "Beep" sound

turned on.

SECURING THE SAFE

Secure the safe to a to a wall stud and a

permanent shelf or the ﬂoor, using the predrilled

mounng holes in the safe.

NOTE: The safe must be secured to a wall stud

on one side of the safe. A wall anchor should be

used on the other side. The safe should also be

mounted to a permanent shelf or the ﬂoor. Use

the hardware provided or consult your hardware

retailer for fastening hardware for your

parcular mounng surfaces.

Place the safe in the desired locaon and mark

the mounng holes to be used. Move the safe

and drill the appropriate diameter and depth of

pilot holes depending on the type of hardware

being used and the mounng surface.

Secure the safe with the fasteners. (Figure 1)

NOTE: This safe must be mounted to a wall

stud and a permanent shelf or the ﬂoor. Failure

to do so will compromise the safety and

security of the safe.

FIGURE 1

SELECTING A LOCATION

THE SAFE SHOULD ALWAYS BE KEPT OUT

OF THE REACH OF CHILDREN.

The safe must be mounted to a wall stud and a

permanent shelf or the ﬂoor. For opmal

safety and security, the safe should be installed

in an isolated, dry and secure area.

NOTE ON LOCKING THE SAFE: The safe needs to

be in an upright posion, as shown in Figure 1

(as shown below), for the locking mechanism

to funcon properly. Failure to mount the safe

in the correct upright posion will compromise

the safety and security of the safe.

40716-1705 516

Image does not necessarily

reflect the style of weapon.

Pistols can be stored for quick access by sliding

the gun’s barrel over the pistol rack as shown

in Figure 4.

FIGURE 3

FIGURE 4

FIGURE 2

BOTTOM TAB

TOP TAB

PISTOL RACKS

WEAPON PLACEMENT

GUN MOUNT BAR

Install the pistol racks on the built-in gun mount bar located on the back wall of the safe.

NOTE: Make sure that top and boom tabs are secured over the gun mount bar as shown in Figure 2.

NOTE: Pistol racks can be adjusted horizonally on the gun mount bar.

STACK-ON PRODUCTS CO.

P.O. BOX 489, WAUCONDA, IL 60084

40716-1705 616

If the door of the safe starts to rub on the door

frame, open the door per the instrucons above.

By the door hinges you will ﬁnd a threaded stem.

Use an Allen Wrench to ghten the threaded

stem. This will realign the door.

MAINTENANCE

IMPORTANT

Keep keys and your combinaon number in a

secure place, away from children. Keep this

record of your serial number and combinaon

in a secure place separate from your safe. To

order a replacement key set, follow the

instrucons on the aached form.

Tools Required:

Phillips screwdriver

5mm Allen wrench

Do not use glass cleaners or sprays on this safe.

Clean with a damp cloth.

40716-1705 716

Key Request

This is not a Registration Form

Verification of ownership is required in order to receive replacement key for your security product.

In order to receive a replacement key to your security product:

1. Complete the following form and send to Stack-On Products.

2. Send a copy of your valid driver’s license along with the form.

3. Send a copy of the receipt showing the original purchase.

4. Security product owner must sign form.

5. Owner’s signature must be notarized.

6. Send $10.00 for replacement key. Personal Check, MasterCard or Visa accepted.

7. Send completed information to:

Stack-On Products Company

1360 N. Old Rand Road

P.O. box 489

Wauconda, IL 60084

Serial Number______________________ Key Number (if applicable) _______

Unit Dimensions________________________________________

Unit Description___________________________________________________________

Owner’s Name ____________________________________ Date Purchased___/___/____

Owner’s Address ___________________________ Unit or Apt Number _________________

City ___________________________ State _______________ Zip Code________________

Telephone Number: (____)___________________ Fax Number: (____)___________________

Owner’s Email Address: ________________________________________________________

Owner’s Signature __________________________ Notary Signature________________

Notary Commission Expires: _____/_____/_____ Notary Stamp

SERVICE REQUESTED

Key Replacement: Yes No

$10.00 charge for this service

Credit Card Information (Please circle one) MasterCard Visa

Expiration Date: ___/___/___ Card Number:______________________________________

Credit Card Identification Number (Located on back of card, last 3 digits on signature strip)_________

9/07

NOTE: You can store your Key #, Serial # and Combination on Stack-On’s SECURE website – stackon.com under

Customer Service. Storing your Key # or your Combination will provide instant access to this important information should

you ever lose your key or combination. Only you will have access to this information.

40716-1705 816

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS

WHICH VARY FROM STATE TO STATE.

IN NO EVENT SHALL STACK-ON’S OBLIGATION UNDER THIS WARRANTY EXCEED THE PRICE

OF THE PRODUCT.

STACK-ON’S LIABILITY FOR ANY BREACH OF THIS WARRANTY SHALL BE LIMITED

EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT, AS DESCRIBED

ABOVE, OR A REFUND OF THE PURCHASE PRICE OF THE PRODUCT.

STACK-ON WILL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO THE INITIAL CONSUMER

FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY, OR PUNITIVE DAMAGES

ARISING OUT OF THE PURCHASE OR USE OF ANY STACK-ON PRODUCTS, INCLUDING THE

SAFES.

THIS WARRANTY IS EXCLUSIVE AND EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES

EXPRESSED OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY DISCLAIMED AND EXCLUDED. STACK-ON

SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES. STACK-ON NEITHER

ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT, ANY OTHER LIABILITY

IN CONNECTION WITH THE SALE OF STACK-ON’S STEEL SAFES.

THIS WARRANTY DOES NOT COVER ANY PRODUCT, OR ANY PART OF ANY PRODUCT, WHICH

HAS BEEN SUBJECT TO EXCESSIVE USE, ACCIDENT, NEGLIGENCE, ABUSE OR MISUSE,

INCORRECT MAINTENANCE, ALTERATION OR REPAIR BY ANYONE OTHER THAN STACK-ON. IN

ADDITION, THIS WARRANTY DOES NOT COVER ANY ACCESSORIES OR PARTS USED WITH OR

IN THE PRODUCT WHICH ARE NOT INCLUDED WITH THE ORIGINAL PURCHASE.

If Stack-On is properly notified during the three-year warranty period and, after inspection confirms there

is a defect, Stack-On will, at its sole option, provide repair parts or exchange the product at no charge, or

refund the purchase price of the product.

Stack-On Products Company

1360 North Old Rand Road

Wauconda, IL 60084

[email protected]

If you believe there is a defect in material or workmanship in your Steel Safe during the three-year

warranty period, please contact our customer service department, by regular mail or email at the address

listed below, and include with your correspondence proof of purchase information and the model number

of the safe.

Stack-On Products Co. (“Stack-On”) Steel Safes are warranted to be free from defects in material and

workmanship for a period of three (3) years from the date of original purchase by a consumer. This

warranty extends to the initial consumer only.

LIMITED THREE YEAR WARRANTY

STEEL SAFES

40716-1705 916

Su combinación segura electrónica:

Serie #:

• Anote el número de serie de la etiqueta en la

parte posterior de la caja fuerte o la etiqueta en el

interior de la placa de cierre en la parte frontal de

la caja fuerte

• Registre su número de combinación

NOTA: Puede almacenar su número de clave,

número de serie y combinación en el sitio web

SECURE de Stack-on - stackon.com bajo Servicio al

cliente. Almacenar su Llave # o Combinación

proporcionará acceso instantáneo a esta importante

información si alguna vez pierde sus llaves o su

combinación.

Sólo usted tendrá acceso a esta información.

• Mantenga las llaves y la combinación en un

lugar seguro lejos de los niños

• NO GUARDE LAS TECLAS O LA

COMBINACIÓN INTERIOR SEGURA

INSTRUCCIONES

SHD-AOTT-BG-E

Eliminación de la batería

Deseche las baterías usadas según la ley

municipal o provincial.

1. Cerradura electrónica

2. Bloqueo de teclas

3. Compartimento de la batería (interior seguro)

4. Botón de reinicio (interior seguro)

FUNCIONES DE CONTROL

IMPORTANT

(4) M6 x 50 mm (2 " largo) Tornillos Lag

(4) Arandelas

(4) M6 x 40 mm (1-1/2” largo) Anclajes de plásco

Taladro

Destornillador de cabeza plana de hoja delgada

Llave de 10 mm

3/8” (9.5 mm) Broca de mampostería para perforar en

mampostería

3/16” (5 mm) Taladro para la perforación en madera y los

pernos de la pared

HARDWARE INCLUIDO: HERRAMIENTAS NECESARIAS:

DETALLE DE LA CAJA

FUERTE INTERIOR

40716-1705 1016

EMPEZANDO

NOTA: No mezcle baterías viejas y nuevas. No

mezcle baterías alcalinas, estándar o recargables.

Esta caja fuerte usa 4 pilas AA. Bajo uso normal,

las baterías durarán cerca de 1 año.

NOTA: Si las pilas están bajas, la luz amarilla

parpadeará cuando pulse el teclado. Ubique las

baterías dentro de la caja fuerte.

Abre el Comparmiento de la batería en la parte

posterior de la puerta Presionando la lengüeta

en la dirección de la E instalar las pilas. La luz

Verde con un pido si las pilas están

Correctamente.

INSTALACIÓN DE LA BATERÍA

Cuando reciba su caja fuerte, tendrá que

abrir la puerta con la llave para instalar las

baterías. Las baterías están incluidas y se

encuentran dentro de la caja fuerte.

Para abrir la puerta con la llave, rere

primero la cubierta de la cerradura de la

parte delantera de la placa frontal con un

destornillador de punta ﬁna. Inserte la llave y

gírela en sendo horario.

La puerta se abrirá automácamente cuando

la llave esté en posición abierta.

NOTA: El botón de reinicio situado en el

interior de la puerta, está cubierto con una

tapa extraíble. Cuando ulice el botón de

reinicio durante la grabación de su combi-

nación, rere la tapa para acceder al botón.

Ulice una punta del lápiz para presionar el

botón de reinicio.

Vuelva a colocar la tapa ﬁrmemente sobre el

botón de reinicio después de grabar su

Combinación. Si no lo hace, se pondrá en

peligro la seguridad de la caja fuerte.

NOTA: Debe girar la llave de vuelta a la

posición bloqueada antes de poder grabar una

combinación, cerrar y cerrar la puerta.

NOTA: Esta llave también se ha proporcionado

en caso de que las baterías se agoten. Si pierde

la llave, puede comprar una llave de reemplazo

haciendo referencia al número de serie ubicado

debajo de la cubierta de la cerradura extraíble.

Consulte la sección al ﬁnal de esta instrucción

con respecto a las llaves de reemplazo.

Compartimiento de la

batería

Botón de reinicio

DETALLE DE LA CAJA

FUERTE INTERIOR

Table des matières

Langues :

Autres manuels Stack-On Sûr

Stack-On

Stack-On QAS-1000 Manuel utilisateur

Stack-On

Stack-On PS-15-20-B Manuel utilisateur

Stack-On

Stack-On SS-16-MB-B Manuel utilisateur

Stack-On

Stack-On TD-040-GP-E Manuel utilisateur

Stack-On

Stack-On PWS-1555 Manuel utilisateur

Stack-On

Stack-On SS-22-MB-E Manuel utilisateur

Stack-On

Stack-On E18-30-MB-E Manuel utilisateur

Stack-On

Stack-On GCB-18C Manuel utilisateur

Stack-On

Stack-On TD5518-24-GP-E-S Manuel utilisateur

Stack-On

Stack-On PC-900-B Manuel utilisateur

Stack-On

Stack-On E-66-MB-E-S Manuel utilisateur

Stack-On

Stack-On SHD-AOTT-BG-B Manuel utilisateur

Stack-On

Stack-On PC-95K-RTX Manuel utilisateur

Stack-On

Stack-On W-24-BH-E-S Manuel utilisateur

Stack-On

Stack-On PDS-1500 Manuel utilisateur

Stack-On

Stack-On QAS-1514-B Manuel utilisateur

Stack-On

Stack-On QPS-2012-E Manuel utilisateur

Stack-On

Stack-On PDS-1800-B Manuel utilisateur

Stack-On

Stack-On W-60-BH-E-S Manuel utilisateur

Stack-On

Stack-On QAS-1510-B Manuel utilisateur

Stack-On

Stack-On A-64-MB-E-S-72 Manuel utilisateur

Stack-On

Stack-On Buck Commander Manuel utilisateur

Stack-On

Stack-On GCB-1522 Manuel utilisateur

Stack-On

Stack-On QAS-1200B Manuel utilisateur

Manuels Sûr populaires d'autres marques

Squire

Squire Stronghold Keysafe Manuel utilisateur

Phoenix

Phoenix FS0352C Fiche d'information produit

Phoenix

Phoenix KS0030E Series Manuel utilisateur

Vaultek

Vaultek 10 Series Fiche technique

Arregui

Arregui CLASS Manuel utilisateur

Beaumont

Beaumont SMART KEYBOX Manuel utilisateur

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuel utilisateur

Hornady

Hornady SnapSafe Trunk Safe II Manuel utilisateur

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manuel utilisateur

Honeywell

Honeywell 5912 Manuel utilisateur

Phoenix

Phoenix FS1280F Manuel utilisateur

Phoenix

Phoenix SS0992K Fiche d'information produit

Technomax

Technomax Trony Series Manuel

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manuel utilisateur

RICHTER CZECH

RICHTER CZECH LA Manuel d'utilisation

Olymp

Olymp GOsafe 110 Manuel utilisateur

Phoenix

Phoenix SS0100E Fiche d'information produit

Clarke

Clarke Strong-Arm CS1000K Mode d’emploi