Spirax Sarco WAV1 Manuel utilisateur

WAV1

Solenoid Valve

InstallationandMaintenanceInstructions

IM-P405-27

AB Issue 1

4057351/1

1. Safety information

Your attention is drawn to Safety Information Leaflet IM-GCM-10, and, in the UK to

IEE Regulations (BS 7671). Elsewhere, other regulations will normally apply.

2. Description

The WAV1 solenoid is designed for use with the BBV980A bottom blowdown valve. The valve

is a 3-port solenoid valve for use with air or water up to 90°C. The valve has a brass body and

corrosion resistant internals. Application of the rated voltage to the coil will allow air or water into

the BBV980A actuator. When de-energised the solenoid will vent the compressed air or water

in the actuator to atmosphere or drain.

3. Technical data

Enclosure rating IP65

Maximum cable size Ø7

Maximum ambient temperature +55°C

Weight 0.40 kg

Power consumption 30 VA (inrush) 5 VA/8 W (hold)

Voltages available 24, 110, 220/240 Vac

Fluid duty Air or water

Maximum operating pressure 5 bar g

Fluid temperature range 0 to +90°C

Response times Opening 8-15 ms

Closing 8-15 ms.

4. Materials

Part Material

Body Brass

Internals Brass

Seal Nitrile rubber

WAV1

IM-P405-27 AB Issue 1

6. Installation

The WAV1 is rated for operation in ambient temperatures from -5oC to +50oC. Solenoid

protectionratingisIP65.Outdoorinstallationwithoutadditionalenvironmentalprotectionisnot

recommended.

To fit a WAV1 type solenoid assembly to the valve actuator:

-Separate the supplied split coupling provided with the WAV1.

-Screw one half of the coupling into the G¼" BSP connection on the underside of the BBV980A

actuator and tighten using a 6 mm A/F allen key.

-Connect the other half to port 'A' on the WAV1 and tighten.

-Fit the two halves of the coupling together and tighten using a 19 mm A/F spanner.

-Connect the air or water supply to port 'P' (¼" BSP). If water is the operating medium connect

the discharge port (port R) to a safe drain point.

The solenoid valve incorporates a lockable manual override which can be operated by

pushing the spring loaded plastic button inwards and turning it clockwise to lock it in the

'override' position. This bypasses the solenoid and allows the BBV980A to be operated

without an electricity supply. The screw is released by turning it anticlockwise.

The WAV1 can also be mounted remote from the actuator.

7. Wiring

Caution: Do not apply power to the coil unless it is fitted to the valve.

The rated voltage is printed on the name-plate. The cable socket may be moved through 360°

by removing the central plastic screw and turning the connector. Ensure the cable socket gasket

is slightly compressed on refitting.

5. Dimensions (approximate) in millimetres

100

34 G¼" BSP

(3 places)

Actuator supply

(port A)Air/water

exhaust

(port R)

Air/water inlet

(port P)

Table des matières

Autres manuels Spirax Sarco Unité de contrôle

Spirax Sarco

Spirax Sarco M15 Series Manuel utilisateur

Spirax Sarco

Spirax Sarco RSW Manuel utilisateur

Spirax Sarco

Spirax Sarco 600 Series Manuel utilisateur

Spirax Sarco

Spirax Sarco M10Hi Manuel utilisateur

Spirax Sarco

Spirax Sarco M10S Manuel utilisateur

Spirax Sarco

Spirax Sarco ABV21i Manuel utilisateur

Spirax Sarco

Spirax Sarco SX100e Fiche technique

Spirax Sarco

Spirax Sarco TD62LM Manuel utilisateur

Spirax Sarco

Spirax Sarco HV3 Manuel utilisateur

Spirax Sarco

Spirax Sarco Colima FLU Series Manuel utilisateur

Spirax Sarco

Spirax Sarco HL 17 Manuel utilisateur

Spirax Sarco

Spirax Sarco 25P Manuel utilisateur

Spirax Sarco

Spirax Sarco BM series Manuel utilisateur

Spirax Sarco

Spirax Sarco TD3-3 Manuel utilisateur

Spirax Sarco

Spirax Sarco 25E Manuel utilisateur

Spirax Sarco

Spirax Sarco Spira-trol K Series Manuel utilisateur

Spirax Sarco

Spirax Sarco M10Si Automation Manuel utilisateur

Spirax Sarco

Spirax Sarco M10HPi ISO Series Manuel utilisateur

Spirax Sarco

Spirax Sarco SV615 Manuel utilisateur

Spirax Sarco

Spirax Sarco DP27 Manuel utilisateur

Spirax Sarco

Spirax Sarco BSA3HP Manuel utilisateur

Spirax Sarco

Spirax Sarco MkII Mode d’emploi

Spirax Sarco

Spirax Sarco DP17 Manuel utilisateur

Spirax Sarco

Spirax Sarco DLV7 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur