SOYO SY-6IBM Manuel utilisateur
SY-6IBM
Motherboard
***************************************************
Pentium®
III, Pentium®
II & Celeron
processors supported
82440 BX AGP/PCI Motherboard
3D Audio & AGP built-in
66 & 100 MHz Front Side Bus supported
Micro-ATX Form Factor
***************************************************
User's Guide
&
Technical Reference
SOYO™SY-6IBM
ii
About This Guide
This User's Guide is for assisting system manufacturers and end users in setting up
and installing the Motherboard. Information in this guide has been carefully checked
for reliability; however, no guarantee is given as to the correctness of the contents.
The information in this document is subject to change without notice.
Copyright Notice
Copyright 1998, Soyo Computer Inc. All rights reserved. This manual is copyrighted
by Soyo Computer Inc. You may not reproduce, transmit, transcribe, store in a
retrieval system, or translate into any language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of
this publication without express written permission of Soyo Computer Inc.
Trademarks
Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property
of their owners.
Disclaimer
Soyo Computer Inc. makes no representations or warranties regarding the contents
of this manual. We reserve the right to revise the manual or make changes in the
specifications of the product described within it at any time without notice and without
obligation to notify any person of such revision or change. The information contained
in this manual is provided for general use by our customers. Our customers should be
aware that the personal computer field is the subject of many patents. Our customers
should ensure that their use of our products does not infringe upon any patents. It is
the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and
not to infringe upon or assist others to infringe upon such rights.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to restrictions set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause
at 252.277-7013.
Product Rights
Products mentioned in this manual are mentioned for identification purpose only.
Product names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies.
If you need any further information, please come to our home page on the Internet.
The address is "http://www.soyo.com.tw".
Edition: February 1999
Version 1.0
6IBM SERIAL
FC
CTested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
POST CONSUMER
RECYCLED PAPER
100%
Table of Contents SY-6IBM
iii
Table of Contents
SY-6IBM MOTHERBOARD LAYOUT ......................................................1
CHAPTER 1 INTRODUCTION .............................................................2
1-1 KEY FEATURES..............................................................2
1-2 HANDLING THE MOTHERBOARD ..................................5
1-3 ELECTROSTATIC DISCHARGE PRECAUTIONS.............5
CHAPTER 2 HARDWARE SETUP .......................................................6
2-1 PREPARATIONS .............................................................6
2-2 UNPACKING THE MOTHERBOARD................................7
2-3 INSTALLATION GUIDE....................................................8
CHAPTER 3 BIOS SETUP UTILITY...................................................31
3-1 SOYO COMBO SETUP..................................................33
3-2 STANDARD CMOS SETUP............................................38
3-3 BIOS FEATURES SETUP..............................................41
3-4 CHIPSET FEATURES SETUP........................................46
3-5 POWER MANAGEMENT SETUP...................................49
3-6 PNP/PCI CONFIGURATION SETUP..............................53
3-7 LOAD SETUP DEFAULTS..............................................56
3-8 INTEGRATED PERIPHERALS.......................................57
3-9 SUPERVISOR PASSWORD...........................................61
3-10 USER PASSWORD........................................................63
3-11 IDE HDD AUTO DETECTION.........................................64
CHAPTER 4 3D PNP AUDIO ONBOARD...........................................65
4-1 ONBOARD JOYSTICK PORT ........................................65
4-2 ONBOARD AUDIO.........................................................65
CHAPTER 5 DRIVERS INSTALLATION.............................................68
Motherboard Layout SY-6IBM
1
SY-6IBM MOTHERBOARD LAYOUT
Back Panel SY-6IBM Platform
COM 1
VGA
PRT
USB 1
USB 2
PS/2 KB
Connector
PS/2 Mouse
Connector
PCI Slot #1
PCI Slot #2
PCI Slot #3
Intel
82371EB
IR1
15
1
CPUFAN
COM2
1
FDC
ISA Slot #1
ATX
Power
3
JP1
1
CHAFAN
1
Flash BIOS
YMF740-V
YAMAHA
W83977EF
-AW
Winbond
Game Port
LINE-OUT
LINE-IN
MIC JACK
J4
W83781D
8 2 8 AC
Hardware
Monitoring
3
1
WOL
Header
JP44
Speaker
Keylock
Power
LED
Reset
PWRBT
Turbo
LED
HDD LED
_
+
_
+
_
+
_
+
J5
14
Winbond
W83782M
JP5
CMOS Clear
Jumper
JP8
JP3
3
1
ATI
RAGE 128
3V
Lithium
Battery
IDE 2
1
IDE 1
1
3
1
DIMM 1
DIMM 2
DIMM 3
Slot 1
Intel
82443 BX
AC97
Codec
JP10
Introduction SY-6IBM
2
Chapter 1
INTRODUCTION
The SY-6IBM AGP/PCI Motherboard is a high-performance Slot 1
processor supported Micro-ATX form-factor system board. SY-6IBM
uses the 82440 BX Chipset technology and supports Slot 1
processors. This Motherboard is fully compatible with industry
standards and adds many technical enhancements.
1-1 KEY FEATURES
ØSupports Intel Pentium®
III processor (450-550MHz), Pentium®
II
processor (233-450MHz) & Celeronprocessor (266-433MHz)
ØEasy CPU settings in BIOS with the “SOYO COMBO Setup”.
Ø3D YAMAHA YMF740 Audio
ØATI Rage 128 Graphics/Multimedia accelerator with 8MB Video
memory on board
ØAuto-detect CPU voltage
ØPC98, APM, ACPI, Ultra DMA/33
ØPower-on by modem or alarm
ØSupports Wake-On-LAN (WOL)
ØSupports Power-On by PS/2 Keyboard
Ø3 x 32-bit bus mastering PCI slots
Ø1 x 16-bit ISA slot
Ø2 x USB ports
Ø1 x IrDA port
ØSupports multiple-boot function
ØATX power connector
ØPower failure resume
Introduction SY-6IBM
3
SY-6IBM PLATFORM FEATURES
Board Size 4-layer PCB, 24.4x22.0cm (9.6”x 8.7”), Micro-ATX
Form Factor
Slot1 Slot 1 for Pentium®
III, Pentium®
II & Celeron
Processor
ØSupports the following processors
u100MHz FSB
Pentium®
II 350/400/450 MHz
Pentium®
III 450/500/550 MHz
u66MHz FSB
Pentium®
II 233/266/300/333 MHz
Celeron300A/333/366/400/433 MHz
Celeron266/300 MHz
ØSupports both boxed and non-boxed type of CPUs
ØIncludes a CPU mount kit with retention clip
ØFeatures Auto-detection of CPU voltage
Chipset 82440 BX AGP/PCI Set
Audio Onboard YAMAHA YMF740 Onboard
AGP Onboard ATI RAGE 128 Graphics/Multimedia Accelerator
ATX Power 20-pin Male Connector
CPUFAN 3-pin CPU Cooling Fan Connector
Memory DIMM Bank (DIMM1~3)
ØThree strips of 168-pin Unbuffered or Registered
SDRAM DIMM
ØSupports 8/16/32/64/128/256MB DIMM modules in
each bank
ØProvides up to 768 MBytes of main memory
BIOS System BIOS built-in, Award BIOS
ØAPM, ACPI and "Plug-and-Play" function
ØSupports multiple-boot function
ØOnboard FLASH memory for easy upgrade
ØY2K Compliant
Bus Controller Compliant with version 2.1 PCI specifications
PCI Slots 3 x 32-bit Bus Mastering Slots
ISA Slots 1 x 16-bit ISA Slots
Introduction SY-6IBM
4
IDE1, IDE2 2 x 40-pin Bus Mastering E-IDE/ATAPI Ports
ØIDE1: Primary IDE Device Connector
ØIDE2: Secondary IDE Device Connector
ØSupports Ultra DMA/33
COM2 1 x 9-pin RS-232 Serial Connector
FDC 1 Floppy Disk Drive (FDD) Port
(Supports 1.2MB/1.44MB/2.88MB and LS120/3-mode FDD)
IR1 5-pin Serial Infrared Device Header
Keylock 5-pin KeyLock Header
Reset 2-pin Reset Switch Header
Speaker 4-pin PC Speaker Header
TB_LED 2-pin Turbo LED Header
HDD_LED 2-pin IDE Device LED Header
PWRBT ATX Power On/Off Switch 2-pin Header
J4, J5 2 x CD Line-in 4-pin Headers
JP1 Power-On by PS/2 Keyboard Jumper
JP3 AGP operating speed Select Jumper
JP5 CMOS Clear Jumper
JP8 Power Button Enable Jumper
JP10 External Suspend Button Header
JP44 WOL (Wake-On-LAN) 3-pin Header
SY-6IBM BACK-PANEL FEATURES
PRT 1 x Onboard 25-pin Female Parallel Printer Port
COM1 1 x Onboard RS-232 Serial Port
PS/2 KB 1 x Onboard PS/2 Keyboard Connector
PS/2 Mouse 1 x Onboard PS/2 Mouse Connector
USB1, USB2 2 x Onboard USB
(Universal Serial Bus)
Connectors
VGA 1 x Onboard 15-pin VGA Port
JOYSTICK 1 x Onboard 15-pin Joystick Port
LINE-OUT 1 x Onboard Line-out Audio Stereo Jack
LINE-IN 1 x Onboard Line-in Audio Stereo Jack
MIC JACK 1 x Onboard Microphone Stereo Jack
Introduction SY-6IBM
5
1-2 HANDLING THE MOTHERBOARD
To avoid damage to your Motherboard, follow these simple rules
while unpacking:
ØBefore handling the Motherboard, ground yourself by grasping
an unpainted portion of the system's metal chassis.
ØRemove the Motherboard from its anti-static packaging. Hold
the Motherboard by the edges and avoid touching its
components.
ØCheck the Motherboard for damage. If any chip appears loose,
press carefully to seat it firmly in its socket.
Warning: Do not apply power if the Motherboard appears
damaged. If there is damage to the board, contact your
dealer immediately.
1-3 ELECTROSTATIC DISCHARGE PRECAUTIONS
Make sure to ground yourself before handling the Motherboard or
other system components. Electrostatic discharge can easily
damage the components. Note that you must take special
precautions when handling the Motherboard in dry or air-conditioned
environment.
To protect your equipment from electrostatic discharge, take the
following precautions:
ØDo not remove the anti-static packaging until you are ready to
install.
ØGround yourself before removing any system component from
its protective anti-static packaging. (To ground yourself, grasp
the expansion slot covers or other unpainted portions of the
computer chassis.)
ØFrequently ground yourself while working or use a grounding
strap.
ØHandle the Motherboard by its edges and avoid touching its
components.
Hardware Setup SY-6IBM
6
Chapter 2
HARDWARE SETUP
Congratulations on your purchase of SY-6IBM Motherboard. You
are about to install and connect your new Motherboard.
Note: Do not unpack the Motherboard from its protective anti-
static packaging until you have made the following preparations.
2-1 PREPARATIONS
Gather and prepare all the following hardware equipment to
complete the installation successfully:
1. Slot 1 processor with built-in CPU cooling fan (boxed type).
Note: This Motherboard supports non-boxed type CPUs. The
heavier CPU cooling fan requires the installation of a CPU
support stand included in the Motherboard package.
2. DIMM memory module
3. Computer case and chassis with adequate power supply unit
4. Monitor
5. Keyboard
6. Pointing Device (PS/2 mouse)
7. Speaker(s) (optional)
8. Disk Drives: HDD, CD-ROM, Floppy drive…
9. External Peripherals: Printer, Plotter, and Modem (optional)
10. Internal Peripherals: Modem and LAN cards (optional)
Frequently Asked Questions:
lDo I need to install a VGA card?
lDo I also need to install a sound card?
The answer is NO to both questions above, since, for your
convenience, the SY-6IBM Motherboard already features one built-
in VGA port and three built-in audio-stereo ports (Line-out, Line-in,
Microphone).
lWhat kind of speaker can connect to "Line-out" port?
This Motherboard requires a speaker with built-in amplifier to
generate proper output sound volume.
Hardware Setup SY-6IBM
7
2-2 UNPACKING THE MOTHERBOARD
When unpacking the Motherboard, check for the following items:
ØThe SY-6IBM 82440 BX AGP/PCI Motherboard
ØThe Quick Start Guide *
ØThe Installation CD-ROM *
ØOne IDE Device Flat Cable
ØOne Floppy Disk Drive Flat Cable
ØSerial port flat cable with a 9-pin connector bracket
* If your board comes with a driver disc and a paper manual, the Quick Start Guide
and the CD-ROM are not included in the package.
Warning: Do not unpack the Motherboard from its anti-
static packaging until you are ready to install it.
Like most electronic equipment, your Motherboard may be damaged
by electrostatic discharge. To avoid permanent damage to
components ground yourself while working by using a grounding
strap. Otherwise, ground yourself frequently by touching the
unpainted portion of the computer chassis to drain the static
charges.
Handle the Motherboard carefully, holding it by the edges.
You are now ready to start the installation.
Autres manuels pour SY-6IBM
1
Table des matières
Autres manuels SOYO Carte mère
SOYO
SOYO SY-7IZM Manuel utilisateur
SOYO
SOYO SY-P4VTE Manuel utilisateur
SOYO
SOYO 6KD Manuel d'utilisation et d'entretien
SOYO
SOYO SY-K7ADA Manuel utilisateur
SOYO
SOYO SY-K7VLM-B Manuel utilisateur
SOYO
SOYO SY-7VDA Manuel utilisateur
SOYO
SOYO SY-6BB V1.0 Manuel utilisateur
SOYO
SOYO 5XAE5 Manuel d'utilisation et d'entretien
SOYO
SOYO SY-5EMA Pro Super 7 Manuel d'utilisation et d'entretien
SOYO
SOYO SY-6BA+III Manuel utilisateur
SOYO
SOYO SY-7IS2 Manuel utilisateur
SOYO
SOYO SY-6IZA Manuel d'utilisation et d'entretien
SOYO
SOYO SY-P4X400 DRAGON Lite Manuel utilisateur
SOYO
SOYO 6KF Manuel d'utilisation et d'entretien
SOYO
SOYO SY-P4VSA Manuel utilisateur
SOYO
SOYO SY-7VBA133U Manuel utilisateur
SOYO
SOYO SY-K8USA DRAGON Ultra Manuel utilisateur
SOYO
SOYO 82430 TX P54C Manuel d'utilisation et d'entretien
SOYO
SOYO SY-P4I845GV Manuel utilisateur
SOYO
SOYO 486 PCI/VESA Manuel d'utilisation et d'entretien
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
